Yitoa Precision Electronics VIRGO User Manual
virGo
6 7 8 9
TWS BLUETOOTH PLAY MODE (NEED 2 virGo SPEAKERS)
Once link 2 virGo speakers together by TWS Bluetooth mode,
they can play the same song at the same time by one mobile phone,
then you can enjoy better experience of surround sound.
Step 1 : When you power on the two virGo speakers at the first time,
short press the " " key 2 times of one speaker and
they start to pairing together, once paired, speakers will say
"di di di" or say "TWS connect";
Step 2 : Open your mobile phone's bluetooth to search for the speakers
bluetooth name "virGo" to connect.(First time using TW S play
mode, we must first let these two speakers connect together,
then open the mobile phone's bluetooth
to search for speaker bluetooth pair name to pairing).
1
.
Powe r B ank Speak er：1PCS
1PCS
1
BUTTON : POW ER ON/OFF AND W ORK MODE SWITCH
2
USB : POW ER BANK OUTPUT 5V-1.2A
3
BUTTON : VoL+ /PRE
4
BUTTON : PLAY/PA USE/RADIO SEARCH/CALL
5
BUTTON : VoL-/NEXT
6
BLUETOOTH LED : BL UE
7
BATTERY CAPACITY LED (67-100%） : GREEN
8
BATTERY CAPACITY LED（34-66%） : RED
9
BATTERY CAPACITY LED（0-33%） : WHITE
10
MICRO US B : DC IN 5V-1.2A
11
HOOK HOLE
12
3.5mm A UX HOL E : AUDIO-IN /FM ANTENNA
Manual Instruction
The picture is o nly for refere nce , pleas e refer to the final p roduc t.
Pleasan t Sound Surrounding You Fore ver
1
• Removal of the built -in battery invalida tes the wa rranty and may
destroy the pro duct.
01 02 03
04 05 06 07
2
3
4
5
10
11
12
s
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example‐ use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Loading...