★ Brief introduction
YIPU ring light is composed of high brightness and high display finger
patch LED, with an average life span of more than 50,000 hours,
featuring high efficiency, energy saving and power saving, green
environmental protection, and light decline minimum, etc., designed
with wide voltage, built-in ac adapter power supply from 100v-240v,
adjustable color temperature within 3200-6500. The ring light is stable
and suitable for indoor and outdoor shooting, portrait shooting, wedding
dress shooting, makeup shooting, web celebrity live broadcasting and
professional light supplement in the anchor room, etc.
Instructions
1. Install the ring light on the bracket and adjust it to the best shooting
angle.
2. Insert the power cord into the power jack of the ring light. After that,
the LED ring light is already on. Turn on the light by turning the
brightness knob, and adjust the brightness from 0 to 100%. The color
temperature can be adjusted 3200K-6500K through the color
temperature adjustment knob, so as to achieve a suitable brightness
and color temperature.
3.Mobile phone bracket installation: first unscrew the end of the mobile
phone clip through universal hose,insert the hose round head into the
mobile phone clip and tighten the end,then install the home base in the
middle screw holes or hot boots bayonet to make its locking fixed, pull
the mobile phone clip to grip the phone, finally adjust the perfect mobile
shooting angle to broadcast live.
4. Use the makeup mirror: align the base of the makeup mirror with the
screw hole in the center of the ring lamp, and turn the tightening knob
to lock it tightly.
5. Use the camera: tighten the special screw of the camera conversion
accessory（Need to be purchased separately） to the screw lamp at the
center of ring light and the screw the hole on the front of the
lampshade, and then install the camera on the accessory to shoot with
the camera
★ Notes
1. Read the instructions carefully before use.
2. Non-professionals are strictly prohibited to disassemble the lamp
body, and no professional LED welding technicians are allowed to weld
LED beads without authorization.
3. When not using this product, please turn off the power switch and
unplug the power cord to prevent loss caused by power leakage.
4. Please pay attention to safety during use . No falling so as not to
cause fire .
5. The damage caused by human factors or irresistible factors is not
covered by the warranty.
★Product mix
1. Brightness adjustment knob:used to adjust the brightness of the light
2. Color temperature adjustment knob :used to adjust the color
temperature of the light.
3. Fixed groove:used to fix the phone and mirror.
4. Hot shoe bayonet :used to fix the phone.
5. Hot shoe bayonet :used to fix the phone.
6. Hot shoe bayonet :used to fix mobile phones.
7. USB port :used for charging devices such as mobile phones .
8. Power jack :to connect the power supply AC100V-240V.
9. Angle fixed knob :The lamp body can be adjusted 360°.
10. Stand fixed knob.
11. SLR bracket fixing hole (requires optional SLR bracket)
12. Main switch
★Maintenance list
User Name Number
Address
Dealer Name Invoice Number
Date of purchase Dealer stamp
Repair
Date
Faults and
inspection records
Maintenance
date
Maintainer
★Ring light Technical parameters
Model CL18
Input Voltage
Output Power
Intensity of
illumination
Adjustable
range
Quantity of
LED lamp
beads
Color
temperature
Color
rendering
index
Product size Inside diameter :31cm Outside diameter :45cm
Average life
span
LED and
other
standard
components:
LED ring light /Power cord / Instruction/Folding
lamp holder /Universal hose/ Phone
clip/Bluetooth remote control/ Cosmetic mirror/
Portable bag
The promise that move light
3200K-6500K(±200K)
100V-240V
80W
7840LUX
480PCS
Ra≥95
50000hours/h
Bluetooth Remote Control
Loading...