Yifang Digital Technology XN690 User Manual

Ც㜭ㅄ

⭘ᡧ᡻޼

Ც

Smart Pen

User Manual

Model: XN690

Accessories

ˊ

● Receiver ● Mini USB Cable ● Smart Pen

● Ink Refill ● Refill Extractor ● User Manual

Overview of Receiver

Receiver

5

1

3

4

2

1. Reset hole- Reset and shut off the device with a needle penetrating inside

for about 3 seconds.

2. Clip-Clipthe A4 paper(default writing area).

3. Display- Indicates the current working status.

4. BlueTooth Connection

5. Power button- Press briefly to turn on the device and press and hold for

3s to power off the device.

6. Mini USB port- Connects with Mini USB cable for charging.

6

Smart Pen

7ˊ

Mini USB port

Connect to PC via Mini USB

cable for charging.

a. Plug the USB cable into the mini USB port on the cap of the pen.

b. Connect the other end of the USB cable to the PC.

11

78

˖

ˊ

a. Slide the new refill into the tip of

b. Gently press the new refill until it

Note

hours.

8ˊ

been fully charged; and it will blink when the battery is low.

Note˖Please use the dedicated USB cable provided together with this pen to

connect the Receiver and the pen.

Disconnect the USB cable when the device has been charged for about 2

LED indicator: LED is on during charging and will be off when battery has

How to Use the Smart Pen

WARNING:

Do not attempt to open the pen. This may cause the

pen to malfunction.

1. Install Refill and Receiver

1) Inserting an Ink Refill into the Pen

Note: Make sure you use a refill that is similar to the original (Standard metal

refill: Φ2.35mm*67.0mm).

the pen.

is lodged securely in place.

2) Taking out the refill with the extractor

a. Remove the cap off the pen.

b. Use the extractor to hold the refill.

c. Slightly pull the old refill out.

d. Insert a new refill inside the pen.

12

3) Fix the receiver onto paper.

Clip the receiver on the top-center of A4 size paper. Hold the pen and write as

usual.

2. Application MemoPlus and NoteTaker

1) Function Description

The smart pen must be used together with the application MemoPlus on

mobile devices and a Windows PC. It can capture the handwritten notes in

JPEG format, and record the real-time writing process as a video clip that can

be shared to your social networks. But for MAC PC, NoteTaker, another

application similar to MemoPlus, must be used.

2) System Requirement

● iPhone 4s /iPad3 or above˄with iOS 8.0 or above˅

● Android 4.3 or above, with Bluetooth 4.0 LE

● Windows XP or above

● MAC˖OS 10.5 or above

3) Download & Installation

a. For mobile devices, go to the App Store or Google Play, search App with

name “MemoPlus”, then download and install the application to your phone.

b. For Windows and MAC PCˈdownload the application program at the

following directory˖

Windows system˖

http://www.efunsmart.com/download/MemoPlus_for_windows.rar

MAC system˖http://www.efunsmart.com/download/Note_Taker_for_MAC.rar

Install the programs as you do with other applications respectively on smart

phones, Windows PC or MAC PC.

13

3. How to use application MemoPlus or Notetaker

3.1 Use MemoPlus on mobile devices

1) Open App

Find the App “MemoPlus”on your smart phone, and tap

the icon to open it, then it will enter the following

interface.

2) Configuration &Connection

Connect the receiver and your smart device via BT. This

smart pen can be connected to your Android or iOS device via BT˖

a. Turn on the BT connection respectively on your smart device and the

receiver;

b. Open the application MemoPlus on your smart device;

c. Enter the Home screen of the app, then find the tool button at the top

of the screen and tap on it to start scanning BT device available around.

˄Note˖This process may take about dozens of seconds.˅

d. Select the receiver from the device list and then tap “Connect” button.

e. As the connection is done, you can check the item “Connect to this device

automatically” (recommended) before tapping OK to finish the whole process.

14