User’s Guide
FCC ID:S7JSH36
Model:SH36
(Smart Bulb Holder)
1.
Smart
Bulb
H
older
1. Screw plug
2. shell
3. Screw shell
2. Getting Started
To configure your Smart Bulb Holder,you need the following:
● Available wireless network (Wi-Fi Router)
● Smart phone (or tablet)
Common light bulb connected to Smart Bulb Holder
●
Use your phone to scan the QR code below or search “Tuya smart” in application
market to download and install the App
Step 1: Registration and login "Tuya smart"APP.
If you don't have the account of “Tuya smart” APP,register an account or sign in with
cellphone number + verification code.This page describes the Registration process.
1.Tap“Register”in the upper right（pic 1）
2.The system automatically determines your country / area.You can also select your
country code by yourself. Enter the cellphone number/E‐mail and tap “Next”（pic 2
3.If you enter the mobile cellphone number，enter the verification code in the
message（pic 3），and enter the password，tap"Confirm" to finish your registration.
4.If you enter the E‐mail，enter the password（pic 4），tap” Confirm" to finish your
registration.
1
）
Make sure your phone is connected to WiFi in your home. Click "+" in the upper right
corner of the homepage and select "Electrical outlet" from the device type.
Step 2: connect to the power supply and press the switch 3 times until the lamp on
the converter flashes rapidly.
Step 3: Enter your WiFi password for your phone and click "Confirm" to enter the
page of the search device.
2
Step 4: Enter the device page, then complete the configuration
How to use Amazon Echo to control your Smart devices?
3
Step 1: Open the” Amazon Alexa”APP,then find the “Skills “button on the menu. Press
it.
Step 2: Search the” Tuya smart,” and choose the first one, then Enable it.
4
Step 3: Select your country code and Enter your “Tuya smart,” APP Account and
Password, then press the “Link Now” button. When the Account success to login
press the “Done” button.
5
Step 4: Back to the menu, and press the “Smart home” button, then choose the
“Devices” , then press the ”Discover” button.
6
Step 5: Now u can use your Alexa to control your Smart devices, enjoy yourself.
Major Specifications
7
Item Descriptions
System support Android 4.0 /IOS 7.0
Wireless IEEE standards 802.11 b/g/n
transmission mode 2.4GHz
Rated Voltage 100~240 V, 50/60Hz
Max. Rated Power 40W
Connector Type E26/E27
Working life 2-3 years
Transmission distance Indoor: 20～30 meters; Outdoor: 40～50
meters(for reference only, different
conditions with different data)
Storage Temperature -20℃ ～ +65℃
Operating Temperature 0℃ ～ +50℃
Operation Relative Humidity 20% ～ 90%（40℃）
Storage Relative Humidity 20% ～ 93%（40℃）
Size L*W*H 93mm*67mm*67mm
The weight of the 70g
8
peration instructions of
The o
cene setting:
一）S
• 1）
Add scenarios
as followings:
APP
Edit the name, such as "home mode" one button to
turn on
devices .
9
The above “Setting” appearson the first page of the APP
2.
10
Add automation (Execute automatically according to conditions such as
weather, device, time, etc any of the conditions are satisfied.)
Selection conditions: temperature, humidity, weather, PM2.5, AQI, sunset and
sunrise, schedule, Device.
To perform the following actions.(execute scenarios, trigger automation, send
alerts and control smart devices)
11
12
The other scenarios and automated settings refer to the above examples
13
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Loading...