Yetter 2984-027 User Manual

ROLLING BASKET ATTACHMENT

2984-026/2984-027

OPERATOR’S MANUAL

PART IDENTIFICATION

YETTER MANUFACTURING CO.
FOUNDED 1930

Colchester, IL 62326-0358
Toll free: 800/447-5777
309/776-3222 (Fax)
Website: www.yetterco.com
E-mail: [e-mail]

FOREWORD

You’ve just joined an exclusive but rapidly
growing club.

For our part, we want to welcome you to the
group and thank you for buying a Yetter product.

We hope your new Yetter products will help you
achieve both goals-increase your productivity and
increase your efficiency so that you may generate
more profit.

This operator’s manual has been designed into
four major sections: Foreword, Safety
Precautions, Installation Instructions and Parts
Breakdown.

This SAFETY ALERT SYMBOL

indicates important safety messages in

the manual. When you see this

symbol, be alert to the possibility of

PERSONAL INJURY and carefully

read the message that follows.

The word NOTE is used to convey information
that is out of context with the manual text. It
contains special information such as
specifications, techniques and reference
information of a supplementary nature.

The word IMPORTANT is used in the text when
immediate damage will occur to the machine due

to improper technique or operation. Important will
apply to the same information as specified by
note only of an immediate and urgent nature.

It is the responsibility of the user to read the
operator’s manual and comply with the safe and
correct operating procedure and to lubricate and
maintain the product according to the
maintenance schedule in the operator’s manual.

The user is responsible for inspecting his
machine and for having parts repaired or
replaced when continued use of the product
would cause damage or excessive wear to the
other parts.

It is the user’s responsibility to deliver his
machine to the Yetter dealer who sold him the
product for service or replacement of defective
parts, which are covered by the warranty policy.

If you are unable to understand or follow the
instructions provided in this publication, consult
your local Yetter dealer or contact:

YETTER MANUFACTURING CO.

309/776-4111
800/447-5777

309/776-3222 (FAX)

Website: www.yetterco.com

E-mail: [e-mail]

WARRANTY

Yetter Manufacturing warrants all products manufactured and sold by it against defects in material. This warranty
being expressly limited to replacement at the factory of such parts or products as shall appear to be defective
after inspection. This warranty does not obligate the Company to bear cost of labor in replacement of parts. It is
the policy of the Company to make improvements without incurring obligations to add them to any unit already
sold. No warranty is made or authorized to be made, other than herein set forth. This warranty is in effect for one
year after purchase.

DEALER: ________________________________________

Yetter Manufacturing warrants its own products only and cannot be responsible for damages to
equipment on which mounted.

2

SAFETY

A brief description of signal words that may be used in this manual:

CAUTION: Used as a general reminder of good safety practices or to direct attention to unsafe practices.

WARNING: Denotes a specific potential hazard.

DANGER: Denotes the most serious specific potential hazard.

SAFETY PRECAUTIONS

You can make your farm a safer place to live and work if you observe the safety precautions given. Study these
precautions carefully and insist that those working with you and for you follow them.

Finally, remember this: an accident is usually caused by someone’s carelessness, neglect or oversight.

WARNING

Never clean, lubricate or adjust a machine that is in motion. Always lower or block the implement before
performing service.

If the machine must be serviced in the raised position, jack or block it up to prevent it from accidentally falling and
injuring someone.

Do not allow riders on the tractor or implement.

Use speeds and caution dictated by the terrain being traversed. Do not operate on any slope steep enough to
cause tipping or loss of control.

Be sure all personnel are clear of the immediate area before operating.

Read and understand the operator’s manual and require all other persons who will operate the equipment to do
the same.

Be familiar with all tractor and implement controls and be prepared to stop engine and implements quickly in an
emergency.

CAUTION

Consult your implement and tractor operator’s manual for correct and safe operating practices.

Beware of towed implement width and allow safe clearance.

FAILURE TO HEED MAY RESULT IN PERSONAL INJURY OR DEATH.

3

TABLE OF CONTENTS

Cover Page……….…………………………………………..………………………...1
Foreword….…………………………………….………………….…………………...2

Safety Symbols and Meanings……………………………………….……………....3

Table of Contents……….…………………………………………………..………….4
Torque Specifications……………………………………………….…..……………..4
Adjustments……..….………..…………………………………………..…….……….5
Assembly Instructions….……….…..…….………………..………………..……..6-10
Maintenance….……………………………..…………………………………….…...11

Parts Identification…….………………………………..………….………...…....12-14

Trouble Shooting…………………………………………………………….………...15

The following table shows torque in ft. lbs. for coarse thread hardware.

Lubricate all bearings and moving parts as assembled and make certain that they work freely.

WARNING: Never work around the toolbar/implement while in a raised position without using safety lockups.

CAUTION: The Residue manager attachments are very heavy. Pay extra attention to lifting techniques while

handling and or maneuvering the opener during assembly. Failure to do so may lead to personal injury.

4

ADJUSTMENTS

ROLLING BASKET ATTACHMENT

1) DOWN PRESSURE – SPRING DOWN PRESSURE CAN BE INCREASED BY MOVING SPRING TO HOLE
“A”. DECREASE DOWN PRESSURE BY PLACING SPRING IN HOLE “C”.

2) DISENGAGE ROLLING BASKET ATTACHMENT – LIFT BASKET AND INSERT PIN. SEE DIAGRAM
BELOW.

5