Yetter 2967-070 User Manual

2967-070 QUICK ADJUST FOR 2967-115

YETTER MANUFACTURING CO.

FOUNDED 1930

Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com

INSTALLATION

1. To install the quick adjust assembly on the combo arm, you must first remove the ½" x 1 ½" carriage bolt (#2 2505-339) from the assembly.

2. Insert the ½ x 1 ½" carriage bolt through the square hole of the spacer strap located on the depth adjustment side of the combo arm.

3. Attach the quick adjust assembly to the ½" x 1 ½" carriage bolt using the lockwasher and hex nut provided.

4. Once installed the quick adjust will act as a down stop for the residue manager wheels.

5. Make certain to check that your planter is operating at the manufacturer’s recommended frame height and is level.

6. Once a depth setting is chosen, check to see if residue manager wheels and the spacer strap have proper clearance during field operation. Failure to do so may result in equipment damage.

DANGER DO NOT USE SPACER STRAP ON COMBO ARM W.A. AS A HANDLE, FINGERS MAY BE SERIOUSLY INJURED ON SHARP EDGE OF BLADE.

2565-442  Great River Printing  04/08