Yetter 2920-020 User Manual

2920-020 SEALER WHEELS

W/2920-212 BRACKET

KEY QTY. PART NO. DESCRIPTION
1 2 2502-313 1/2-13 X 3 HHCS GR. 5 ZP
2 1 2920-211 SHANK MOUNTING BRACKET W.A.
3 1 2920-339 SHANK MOUNTING CLAMP PLATE
4 4 2520-357 1/2-13 LOCK HEX NUT ZP
5 1 2502-363 1/2-13 X 4-1/2 HHCS GR. 5 ZP
6 1 2920-342 INNER PIVOT BUSHING ZYD
7 2 2502-317 1/2-13 X 1-3/4 HHCS GR. 5 ZP
8 1 2920-210 MOUNTING BRACKET W.A.
9 1 2520-467 5/8-11 JAM HEX NUT ZP
10 1 2502-393 5/8-11 X 2-1/2 HHCS GR. 5 ZP
11 1 2920-324 PUSHROD, 9-3/16” EYEBOLT, ZP
12 1 2520-515 3/4-10 LOCK HEX NUT ZP
13 1 2975-302 2975 SPRING BUSHING, PAINTED
14 1 2920-350 COMPRESSION SPRING, SEALER
15 1 2920-330 DISC SEALER SPRING BRACKET
16 1 2570-448 1/8 STANDARD HAIRPIN COTTER ZP
17 1 2925-315 PIN, L128
18 1 2920-212 SEALER WHEEL ARM W.A.
19 2 2565-162 YETTER DECAL, 1-1/2 X 4-1/2
20 2 2502-336 5/8-11 X 4 HHCS GR. 5 ZP
21 2 2570-750 4.5X16 NYL/STL GA WHL 40MM OFFSET
22 2 2967-302 SPACER, ¾” ZYD
23 1 2925-206 ADJUSTMENT STEM W.A.
24 2 2525-451 5/8 MED. LOCKWASHER ZP
25 2 2520-452 5/8-11 HEX NUT ZP

YETTER MANUFACTURING CO.
FOUNDED 1930

Colchester, IL 62326-0358
Toll free: 800/447-5777
309/776-3222 (Fax)

1. Attach Shank Mounting Bracket W.A. (#2) and shank mounting clamp plate
(#3) to shank with two 1/2 x 3 bolts and lock nuts.

2. Attach the Mounting Bracket W.A. (#8) to the shank mounting bracket with
two 1/2 x 1-3/4 bolts and lock nuts.

3. Insert the inner pivot bushing (#6) through the pivot collar of the mounting
bracket.

4. Insert the push rod between the side plates of the mounting bracket and
secure with a 5/8 x 2-1/2” bolt and jam nut.

5. Attach the sealer wheel arm W.A. (#18) to the mounting bracket with a 1/2 X
4-1/2” bolt and hex nut.

6. Slide the spring bracket (#15), spring (#14), spring bushing (#13) and 3/4”
lock nut on the push rod. Tighten the nut down until about 1/4” of threads are
exposed.

7. Attach the 4.5” x 16” gauge wheels (#21) to the adjustment stem (#23) with a
5/8 x 4” bolt, ¾” spacer, lockwasher and 5/8” nut.

8. Slide gauge wheel assembly into the sealer wheel arm and secure with pin
(#17).

2565-458 01/09