Page 1
2 / 8
2.
Features
u
Supporting Wi-Fi intranet or extranet connection: It can be used as a single product or networking
[Multi-product] to be controlled.
Supporting Smart Link network technology: Network configuration is simple and convenient.
u
315mhz/433mhz optional
u
Only working with learning code (1527 and 2262)
u
High confidentiality,stable characteristics,low power consume and easy to operate,plug and play.
3.
Technical parameters
Input Voltage
DC12V
Contact current
<10A
Wireless standard
IEEE802.11b/g/n
Working frequency
2.4G ～2.5G(2400M ～2483.5M)Hz/433/315
Encryption type
WEP/TKIP/AES
Security mechanism
WPA/WPA2
Receiving sensitivity
802.11 b: -91 dbm (11 Mbps)
802.11 g: -75 dbm (54 Mbps)
433/315 :-112 dbm
Static working current
<100mA
Working environment
Temperature：-40℃ ～ +80℃
Humidity：20% ～ 93%
Storage environment
Temperature：-20℃ ～ +70℃
Humidity：20% ～ 93%
Controller capacity
<10
Dimension
128*79*31.5mm
1 / 8
(YET404PC -Four channel wireless intellect receiving control)
V1.0
User Manual
CONTENT
1 Summarize .............................................................................................. 1
2 Features ................................................................................................ 2
3 Technical parameters ................................................................... 2
4 Operating instruction ................................................................. 3
4.1 Mode declaration ................................................................................ 3
4.2 Remote control function ............................................................ 4
4.3 Remote control ................................................................................. 4
4.3.1 APP(APPlication) download and installation ................. 4
4.3.2 APP user registration and login ............................... 4
4.3.3 APP user manual ............................................................... 6
4.3.4 One key to net in ........................................................................ 7
4.3.5
The main control page ............................................................ 8
5
FAQ .................................................................................................. 8
1. Summarize
YET404PC-WIFI(Four channel wireless intellect receiving control)is a dual system controller
with RF & and wi fiwhat can provide switch signal to the fourth relays,so it can meet many
requirements such as: control motor's corotation and reversal;the connection and lock of the
switch and other special control programs.This kind of wireless intellect receiving control mainly
APPly to auto door,curtain,lifting APPliance,gate way,lifter,industrial control and security field.
Page 2
3 / 8
4.
Operating Instruction
4.1
Mode Declaration
u
Momentary: The relay switches ON by pressing a button on the remote control and will remain ON
until button is released.
u
Latched: Press 1-circuit-channel for 1 time,other channels are OFF
u
Toggle: Press transmitter button for 1 time,the receiver relay is ON,press button again,the receiver
relay if OFF.
u
1/2 channels toggle and 3/4 channels momentary: Press 1/2 channels for 1 time to switch the status,press
3/4 channels will remain ON until the button is released
u
The mode is selected by the hop cap of the controller,as follows:
M short - circuit
S short - circuit
Mode
suspended
suspended
momentary
short - circuited
suspended
latched
suspended short - circuit
toggle
shorted shorted
1/2 channels toggle and 3/4
channels momentary
UP
DOWN
M
S
Controller
DC- DC+
K1 K2
K3
K4
1 2 3 4 5 6 7 8 9
10
11 12
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
4 / 8
4.2
Operating Instruction
Ψ
Methods and steps for learning
u
Press the learning button on the controller and then release it after LED lamp is lit and the controller
enters into the learning status.After that,press any corresponding button on remote control.If LED
lamp on the controller flashes for 3 times and then is off, it indicates that the learning is success.
Ψ
Methods and steps for clearing code
u
Long press the learning button (more than 5S) until LED lamp is off
4.3
Mobile Control
4.3.1 APP(APPlication) download and installation
Ψ Android
u
u
Domestic users: users can search through the "APP store-360 handset assistant" platform to
search for keywords: "YET" and "Safemate", download the latest version of "safemate" software,
and press the instructions to complete the installation of the APP
Foreign users: users can search through the "Google Play" platform to search for keywords:
"YET" and "Safemate", download the latest version of "safemate" software, and press the
instructions to complete the installation of the APP;
Ψ
iOS system：Users at home and abroad can search through the "APP Store" platform to search
for keywords: "YET", "Safemate", download the latest version of "Safemate" software, and press the
instructions to complete the installation of the APP
Ψ
Users can also download and install the APP by scanning the QR code below.
4.3.2
APP user registration and login
1) Click the registration button on the login page and enter the registration page
Android
IOS
Page 3
5 / 8
ό
Please click on the national/regional page to select your country or region.Go back to registration
page, enter your right phone number, and click send verification code;Enter the verification code received
by your phone;Before clicking on the next step, you need to read the product disclaimer and check so that
agree to disclaimer.After verification of the verification code, click next to enter the user information
configuration page
ό
In the user information configuration page, write in your email address, login password, and fill in
the login password again;After confirming all the information, please click the finishing button, and
the system will prompt you to register successfully.Click ok, and the system returns to the login page.
At this time, you can log into the software system using your account and password.
Ψ
Account Login
ό
You must be choose your account to complete the login before you can manage and control your device.
Enter the correct account and password, click login, successfully login and enter the system home page.
4.3.3
APP User Manual
Ψ
Used the APP and enter the personal center page;Click the user manual and enter the user's manual
page, where you can select what you want to know.
ό
account management：Will introduce you to "new account registration, account login, password
management, mailbox configuration" etc；
ό
Device management：You will be introduced to "adding new device, device classification, device
list information" etc.
Page 4
7 / 8
location management： introduced to "add new location, edit location, change of device location, or
delete"
ό
Device control：introduce you to the application of "Device details control"
ό
Note: Will introduce you to the use of APP
4.3.4 One key to net in
Ψ
When the APP was installed,will introduce you to add a controller
ό
Click -> (before entering the password,please press adding device confirm after entering the password
of WIFI module button or controller UP button until seeing quick flashing)->three times completed
ό
For more detailed instructions can be seen in the APP user manual
8 / 8
4.3.5 The main control page of the product
Ψ
When you successfully add the new device, pls click on the new device added, in which will enter the
following main control page of the product.At this time, you can enjoy the fun and convenience intelligent.
.
5 FAQ
Q1: Add device failed, and the LED indicator was slow flashing all the time
The LED indicator slow flashing means that it is connecting the router, the connection time over 60S,
it is fail, for that case, maybe wrong with "password entered error" or "data error in transmission". The
user need check the status of the cell phone or router network,and ensure router wife without any limit
contact,please try again for new reconfiguration.
Q2: The device is suddenly out of control
Check the router WIFI, whether the password is changed or not, and check the status of the red
indicator on the device, if it's slow flashing, this is disconnected from the router and controller， you need
reconfigure it.
Router assigns to the IP address of device because of the network, the IP address is changed, it
causes the actual IP of device to be inconsistent with the APP saved equipment, at this moment exit the
APP and restart, and retrieve the device information.
Loading...