Yerasov PB-4, PB-8, PB-6 Owner's Manual

PEDAL BOARD

PB-4
PB-6
PB-8

Owner manual

Please protect this equipment from falling, impacts and excess humidity.

2. Unscrew the flat side-knurled thumbscrews
holding the Pedal Board's bottom cover.

3. The cover has an additional inner mount, so
slide it a little bit towards the screws and
remove it from the Pedal Board.

1 .SCS (Secret Connecting System)
pedalboard is designed to use with SCS series
pedals. Before using an SCS Pedal Board, it
must be prepared for the first run accordingly.
Regardless of the model (PB-4/6/8), all of the
SCS pedalboards are assembled to use and
connected the same way.

Attention! Please read this manual carefully before you start!

3

6. Attach the SCS pedals to the Pedal Board
with the captive screws.

5. Place the pedals on the Pedal Board. The
pedals' sequence is no important, except of
FS-12 (refer to p.8).

4. Pedal Board is now open.