Safety and Compliance
Switch o the Yepzon in places where the use of cellular phones is not permitted or where it can create
interference, for example, onboard airplanes, in the vicinity of medical equipment, and at blasting sites.
Wireless devices are sensitive to interference, which can impair the functionality of the device.
The device is splash-proof but it is not designed to be worn when swimming, nor drop it underwater. Do
not subject the device to blows or drop it on hard surfaces.
The device is designed to be used at temperatures of -10 – +40°C. Coldness may impair the battery
capacity. Do not subject the device to great temperature variation so as to prevent condensation fromf
orming inside the device.
The device includes an integrated rechargeable battery, which cannot be removed. You should not
dispose of the device with household waste. Instead, return it to the place of purchase or to a recycling
point. You can check the location of the nearest recycling point from the local waste management authorities. Do not attempt to remove or modify the battery as this may damage the device and create a
hazard.
Only use standard undamaged chargers equipped with a Micro USB connector. Avoid using excessive f
orce when plugging the connector into a port.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment
and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This product meets applicable national SAR limits of 1.6W/kg. The specific maximum SAR values can
be found at yepzon.com/support. When carrying the product or using it while worn on your body,
either use an accessory such as a holster or otherwise maintain a distance of 0,5 cm from the body
to ensure compliance with RF exposure requirements.
This product does not contain any user-serviceable parts. Changes or modifications made to this
equipment not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
You can read more on safety at www.yepzon.com/support.
You can find the manufacturer’s Declaration of Conformity at www.yepzon.com/legal.
Loading...