Yeoman YM-CKWDBL-R, YM-CKWDGR-L, YM-CKWDGR-R, YM-CKWDPB-L, YM-CKWDBL-L User Manual

Solid Fuel Cooker

INSTALLATION
& OPERATING
INSTRUCTIONS

Models YM-CKWDWH-R / YM-CKWDBL-R
YM-CKWDGR-R / YM-CKWDPB-R / YM-CKWDWH-L
YM-CKWDBL-L / YM-CKWDGR-L / YM-CKWDPB-L

For use in Great Britain and Eire

This product is suitable for use in the stated countries. T
product in other countries it is essential to obtain translated
instructions and in some cases the product may require modification.
Contact Yeoman to obtain further details.

o install the

IMPORTANT

The front and top of this cooker will become hot whilst in operation, it is therefore recommended

that a suitable guard should be used for the protection of young children, the elderly or infirm.

Before installation of this product please read these instructions fully.

The installer should complete the commissioning sheet at the start of the User Instructions

PM179 Issue 1 (October 2006)

Contents

Commissioning Data 3

Technical Specification 4

SITE REQUIREMENTS

Solid Fuel Cooker Dimensions 5
Hearth Dimensions 5
Walls adjacent to Hearths 5

PRE-INSTALLATION CHECKS

Flue or Chimney 7
Additional Ventilation 8

INSTALLATION INSTRUCTIONS

Installing the Cooker 9
Commissioning 10

USER INSTRUCTIONS

General 11
Care of the Cooker 11
Using the stove for the first time 11

ning W

Bur

ning Solid Fuel

Bur
Over Firing 13
Oven Temperature 13
Seasonal Use 13
Ash Removal 13
Recommended Fuels 14

ood

12
12

MAINTENANCE AND SERVICING

General Cleaning 15
Cleaning Glass 15
Chimney Sweeping 15
Annual Service 15

2

FOR YOUR RECORDS

o assist us in any Guarantee claim please complete the following information:-

T

YEOMAN DEALER APPLIANCE WAS PURCHASED FROM

Name: ..................................................................................................................................................................................................

Address:...............................................................................................................................................................................................

............................................................................................................................................................................................................

.

Telephone number:

....................................................................................................................................................

ESSENTIAL INFORMATION - MUST BE COMPLETED

Date installed:......................................................................................................................................................................................

Model Description:..............................................................................................................................................................................

Serial number:

..........................................................................................................................................................

INSTALLATION ENGINEER

Company name:...................................................................................................................................................................................

Address:...............................................................................................................................................................................................

.............................................................................................................................................................................................................

Telephone number:

....................................................................................................................................................................

COMMISSIONING CHECKS (TO BE COMPLETED AND SIGNED)

Is flue system correct for the appliance

Flue swept and soundness test complete YES NO

Smoke test completed on installed appliance YES NO

Spillage test completed YES NO

Use of appliance and operation of controls explained YES NO

Instruction books handed to customer YES NO

Signature: ........................................................................................................ Print name:

YES NO

3

......................................................

TECHNICAL SPECIFICATION

Model 3 Solid fuel cooker

Nominal heat output All fuels KW

m Wg

m

Flue draught @ nominal heat output All fuels

inch Wg

mm

To p

inch

mm

Flue outlet size

Rear

inch

mm

Side

inch

Weight Kg

Wood

Seasoned wood (less than 20% moisture content)

7.5

1.00

0.04

125

5

125

5

125

5

120

Recommended fuels

op Plate

T

Fire Door

Ash Door

Air Control

arming Drawer

W

Solid fuel

Briquetted smokeless fuel suitable for closed appliances.

(Ancit – Phurnacite – T

aybrite – Homefire ovals)

Top Flue

Flue By-pass

Side Flue

Oven

Cleaning Cover

4

SITE REQUIREMENTS

Before installation of this product please read these
instructions fully.

It is very important to also understand the requirements of the
UK Building Regulations (England and Wales – Document J /
Scotland - Part F), along with any local regulations, and

orking practices that may apply. Should any conflict occur

w
between these instructions and these regulations then the
regulations shall apply.

All electrical connections should meet the requirements of
UK Building Regulations (England and Wales – Document P /
Scotland - Part N).

Your local Building Control Office would be happy to advise

hould questions arise, regarding the requirements of the

s
regulations.

The Solid fuel cooker should be fitted by a HETAS (GB only)
registered installer, or approved by your local building control
officer. Your Stovax dealer should be able to arrange this
service for you.

Your building insurance company may also require you to

nform them that you have installed a new heating appliance,

i
so check with your insurers that your cover is still valid after
installing the Solid fuel cooker.

When completing the installation and building works you
should comply with your responsibilities under the Health and
Safety at Work Acts, and any new regulations, which may be
introduced during the lifetime of these instructions.

faulty installation could cause danger to the inhabitants

A
and structure of the building.

SOLID FUEL COOKER DIMENSIONS (Right hand cooker shown)

Top Flue

Additional information covering the installation the Solid fuel
cooker may be found in the following British Standard: BS8303.

Top Flue

5

SITE REQUIREMENTS

HEARTH DIMENSIONS

The appliance must stand on a constructional hearth with the
minimum dimensions as shown in diagram below.

If you are fitting the appliance into an existing hearth setting
check that it complies with the current construction
regulations and is the minimum sizes shown.

If you have no e
construct a suitable non-combustible housing and hearth
setting. However this should be constructed to comply with
the requirements of both current national and local
regulations with the design approved by your local building

xisting fireplace or chimney, it is possible to

control officer. Masonry chimney systems built with clay or
concrete liners or pre-fabricated block systems should be
constructed in accordance with BS 6461 : Part 1. Factory
made insulated systems should comply with BS 4543 : Part 2
and be installed to BS 7566 : Parts 1 to 4.

Remember that any new chimney added to your property may
also require planning permission.

6