YCL NAD-3002, NAD-3001 Datasheet

30W Open Frame Single Output

NAD-300X series

Date: Sep 19,2003 9

Feature:

l 90 to 264Vac universal input range.
l Meet UL/CUL, TUV.
l EMI/RFI meet VDE & FCC limit B.
l Low Cost & compact size.
l 30Watts in130×70×31.5mm Size.
l 2 Year Warranty.

Specifications: typical at nominal line, full load at 25 ° C.

Input Specifications: General Specifications:

Input voltage: 90 to 264Vac Efficiency: 70% typical at full load
Input Frequency: 47 Hz to 63Hz Hold-up time: 15ms @ 115Vac full load

EMI/RFI: VDE & FCC Class B limits Input inrush current: 20A at 115Vac

40A at 230Vac

Earth leakage: 0.2mA max @ 115Vac

0.4mA max @ 230Vac

Dielectric Withstand:

Input/output: 3000Vac
Input/Ground: 1500Vac

Output Specifications:

Output Rating: See Selection table
Output Voltage Accuracy : ± 5% max.

¬Safety Meet: UL/CUL UL60950
TUV EN60950

Line Regulation: ± 1% max.

Switching frequency: 20kHz(reference)

Load Regulation: ± 1% max.

(Full to half load)

Weight: 280g

MTBF: 100,000hours(MIL-HDBK-217F)

Transient Response: ± 1% max.dev.

(Full to half load) 500uS recovery

Environmental Specifications:

Temperature Coefficient: ± 0.04% / °C Operating temperature: 0 to +50 °C
Ripple & Noise: 1% P-P max.

Storage temperature: -20 to +85°C

Humidity: 20 to 90 % RH non-condensing
Vibration: 2.4G , 5 to 500Hz

Protections:

a. Over voltage protection
b. Over power protection

c. Short circuit protection

Cooling: Free air convection

Note:

1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis.

2. Maximum output power is 30W.

3. At least 20% of load is required to obtain stable regulation.

4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap

& a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope
directly.

¬ Please refer the safety approval status on appendix 1, For latest safety approval status

Please consult YCL or visit" www.ycl.com.tw "

30W Open Frame Single Output

NAD-300X series

Date: Sep 19,2003 10

Model Selection Table:

Model No.

Output
Voltage

Output Current

Minimum

Output Current

Maximum

Max.

Power
NAD-3001 5V 0mA 6000mA 30W
NAD-3002 12V 0mA 2500mA 30W

Note:

1. Other output voltage versions available. Please Consult factory for details.

Dimensions: mm ± 0.5mm

DC Output Pin Functions
Pin1,2,3 Vo1
Pin4,5,6 COM

l DC output mating connector is Molex 09-65-2068, Ever 8673-06 or

equivalent.

l AC input mating connector is Molex 5096-02C, Ever 8673 -03N2 or

equivalent.