YCL NAD-20D Datasheet

Date: Sep 19,2003

33

20Watts 3.3V & 5V Dual output

Model No.: NAD-20D

Feature:

l 90 to 264Vac universal input range.
l UL/CUL, TUV, CB safety approval.
l EMI/RFI meet VDE & FCC limit B.

l Low cost & compact size.

l 20 Watts in 102×51.8×31.6 mm size.

l 2 Year Warranty.

Specifications: typical at nominal line, full load at 25° C.
Input Specifications: General Specifications:

Input voltage: 90 to 264Vac Efficiency: 70% typical at full load
Input Frequency: 47 Hz to 63Hz Hold-up time: 15ms @ 115Vac full load

EMI/RFI: VDE & FCC Class B limits Input inrush current: 20A at 115Vac

40A at 230Vac

Earth leakage: 0.2mA max @ 115Vac

0.4mA max @ 230Vac

Dielectric Withstand:
Input/output: 3000Vac

Input/Ground: 1500Vac

Output Spec ifications:

Output Rating: Vo1: +5V/500mA

V02: 3.3V/5A

Output Voltage Accuracy: ± 5% max.

Safety Approval: UL/CUL UL60950

TUV EN60950
CB IEC950

Line Regulation: ± 1% max.

Switching frequency: 30kHz

Load Regulation: ± 3% max.

(Full to half load)

Weight: 180g(5.3Oz)

MTBF: 100,000hours(MIL-HDBK-217F)

Transient Response: ± 1% max.dev.

(Full to half load) 500uS recovery

Environmental Specifications:

Temperature Coefficient: ± 0.04% /°C Operating temperature: 0 to +50 °C
Ripple & Noise: 50mVp-p max

Storage temperature: -20 to +85°C

Humidity: 5 to 95 % RH non-condensing
Vibration: 2.4G , 5 to 500Hz

Protections:

a. Over voltage protection
b. Over power protection

c. Short circuit protection

Cooling: Free air convection

Note:

1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis.

2. Maximum output power is 20W.

3. At least 20% of load is required to obtain stable regulation.

4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic

cap & a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth
oscilloscope directly.

¬ Please refer the safety approval status on appendix 1, For latest safety approval status

Please consult YCL or visit" www.ycl.com.tw "

Date: Sep 19,2003

34

20Watts 3.3V & 5V Dual output
Model No.: NAD-20D

Dimensions: mm± 0.5mm

l AC input mating connector is Molex 5096-03C or Ever 8673-05N2,4 or equivalent.
l DC output mating connector is Molex 67280-0500 , Ever 2532-05K or equivalent.