YCL ADE-4004, ADE-4003, ADE-4002, ADE-4009 Datasheet
Date: Jan 01,2003
632
40Watts Single Output External Adapter
ADE-400X series
Feature:
l 90 to 264Vac universal input range.
l UL , CSA , TUV safety approval.
l EMI/RFI meet VDE & FCC limit B.
l Low cost & compact size.
l 40 watts in 120.5 ×61×35.5mm size.
l 2 year warranty.
Specifications: typical at nominal line, full load at 25°C.
Input Specifications: General Specifications:
Input voltage: 90 to 264Vac Efficiency: 70% typical at full load
Input Frequency: 47 Hz to 63Hz Hold-up time: 10ms @ 115Vac full load
EMI/RFI: VDE & FCC Class B limits Input inrush current: 10A at 115Vac
20A at 230Vac
Earth leakage: 0.2mA max @ 115Vac
0.4mA max @ 230Vac
Dielectric Withstand:
Input/output: 3000Vac
Input/Ground: 1500Vac
Output Specifications:
Output Rating: See selection table
Safety Approval: UL UL1950
CSA 22.2-234/950
TUV EN60950
Output Voltage Accuracy : ± 5% max.
Switching frequency: 70kHz
Line Regulation: ± 1% max.
Weight: 300g
Load Regulation: ± 5% max.
(Full to half load)
MTBF: 100,000hours(MIL-HDBK-217F)
Environmental Specifications: Transient Response: ± 1% max.dev.
(Full to half load) 500uS recovery
Operating temperature: 0 to +40 °C
Temperature Coefficient: ± 0.04% / °C Storage temperature: -20 to +85°C
Ripple & Noise: 1% P-P max. Humidity: 5 to 95 % RH non-condensing
Vibration: 2.4G , 5 to 500Hz Protections: a. Over voltage protection
b. Over power protection
c. Short circuit protection
Cooling: Free air convection
Note:
1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis.
2. Maximum output power is 40W.
3. At least 20% of load is required to obtain stable regulation.
4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap
& a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope
directly.
¬ Please refer the safety approval status on appendix 1, For latest safety approval status
Please consult YCL or visit" www.ycl.com.tw
Date: Jan 01,2003
64
40Watts Single Output External Adapter
ADE-400X series
Model Selection Table:
Document
yes no
Model No.
Output
Voltage
Output Current
Minimum
Output Current
Maximum
Max.
Power
S
ADE
-
4002
12V
0mA
3300mA
40W
S
ADE
-
4003
15V
0mA
2500mA
40W
S
ADE
-
4004
24V
0mA
1600mA
40W
S
ADE
-
4009
48V
0mA
830mA
40W
Dimensions: mm ± 1.0mm
Note:
¬ Order information: ADE-XXXXX Y
-
Others output voltage or output cord versions are available. Please consult factory for details.
® The front of selection table has document description of the products. It need time to develop
if the document sho w No. Please consult factory for the design schedule again.
PLUG Information
DC OUTPUT PLUGS TYPE
Model No.
Loading...