Yayusi Electronic Technology V2 User Manual
Bluetooth speaker
V2 / Bluetooth speaker
Please read me before using
4.To door service and free of shipping cost are not available for this item.
The warranty service may be not available if this Warranty Card got lost or
damaged. Seller has the final explanation right for the warranty terms.
Warranty Records.
No. Purchasing Date Repair Time Defect Repair Result Operator
User Manual
item in correct way.
3.All human damage, self disassemble and self assemble, abnormal usage of
this item, are out the cover range of warranty.
Warranty Terms:
1.Customer could get a new same item within half month since the purchasing
date, if found the purchased item with function problems. The defective item
should be returned with undamaged package and without any human
damage.
2.Warranty service only could be in effect under that the customer uses this
Safety Information
Please read and keep this Manual, and pay attention to
the below warnings.
Please put this speaker in a stable place, to avoid any
damage caused by accident dropping.
Please keep this speaker away from any liquid or fire.
Please don’t leave this speaker in high temperature, or
high moist environment for long time.
Please don’t insolate this speaker
Item List
√
1 pcs speaker
√
1 pcs AUX cable
1 pcs AUX cable
1 pcs speaker
√
1 pcs charging cable
√
1 pcs manual
1 pcs charging cable
Bluetooth speaker
User Manual
V2 / Bluetooth speaker
Please read me before using
1 pcs manual
no operate instruction within 10 minutes.)
The Bluetooth version of the speaker is 4.2. The speaker
also can answer the phone call under AUX/MP3 mode, if
the speaker already connected by Bluetooth. It will back to
original mode when the phone call finished.
How to Line in by AUX (external audio input)?
This speaker can connect to all kinds of audio devices (such
as mobile phones, ipad, MP3 player, cassette player, CD
player, radio, etc.). With 3.5mm AUX plug in the earphone
jack of the audio device and the other end in the AUX slot
of the speaker, press button MODE to shift to AUX mode,
the speaker will prompt “AUX”. Then it can play under AUX
line in mode.
How to use Micro SD/TF Card?
Insert the Micro SD/TF Card into the TF slot of speaker, it
will prompt“ MP3”, then play the audio files in the card.
If the speaker is not in MP3 mode, press M button to shift
into MP3 mode. The speaker will prompt“MP3”.
Support Audio File Format: MP3 WMA WAV APE
Support 32G TF card maximum
Card Reader Function: turn off the speaker, insert the micro
SD/TF card, then connect the speaker and the computer by
the USB cable, USB plug to the computer, the micro USB
plug to the charging slot. It becomes a carder reader, thus
it can transfer the dates between the computer and the
micro SD/TF card.
How to charge?
Buttons Instruction
②
③
⑥ ⑦
④
⑤
Reset
AUX
⑧
① Volume down/Previous song
② Volume up/Next song
③ Pause/PlayM
④ ON/OFF/Mode shift
⑤ Hands free phone call
⑥ Charging slot
⑦ Micro SD/TF card slot
⑨
⑧ AUX Line in
⑨ Reset
How to connect the mobile phone by Bluetooth?
1. Long press power M for 3 seconds, the speaker will
prompts "welcome to use Bluetooth speaker, the
Bluetooth is waiting for connecting the device". In
this status, the indicator light on blue and flash
slowly. If the speaker is not in the Bluetooth mode,
please short press button M to shift into Bluetooth
mode.
1. The Speaker will prompt “battery low, need to be
charged” and turn off automatically.
Turn the power switch OFF, and insert one end of the cable
to the slot of speaker, the USB plug to the computer or
the mobile charger. (The mobile charger output better be
5V, 2000mAh or more than 2000mAh.)
Side indicator light on red indicates it’s charging, light off
indicates charging finished.
2. It takes around 4 hours for fully charged. Its working time
is about 4-8 hours after fully charged. Working time
depends on playing volume. Charging time depends on the
output of the mobile charger.(mobile charge output
small ,charging time longer. mobile charge output big,
charging time shorter.)
Please note it’s normal that the speaker will become a little
heat during charging. Please don’t use the speaker while
charging, to keep the battery life cycle longer.
Reset Function:
When the speaker is stuck, please insert a pointy tool into
the reset hole and press. Then turn on the speaker.
How to connect to tablet pc/laptop by Bluetooth?
Please refer to the way of connecting to mobile phone by
Bluetooth. (Note: the Bluetooth version of the speaker is 4.2,
the Bluetooth connection may fail if the Bluetooth version of
the tablet pc/laptop is lower than 4.2. In this situation, it only
can work by using the USB cable to connect. )
F&Q
2. Turn on the Bluetooth of mobile phone and search V2,
Match the speaker to the mobile phone with the initial
pairing password "0000". After speaker prompted “Bluetooth connection is succeeded”, the blue indicator light
will stop flashing, and then the music file in the mobile
phone can be played via Bluetooth. Bluetooth paring
time is about 1 minute; it will be different for different
mobile phones as the Bluetooth version is different.
3. Note: There is a memory function for the Bluetooth
speaker. Turn off the Bluetooth of the previous mobile
phone, and long press the button for 3 seconds
before connecting it to another mobile phone.
4. Button Control Instruction: press button for power
OFF/ON ; short press button for last song, long press
button for volume down; short press button
for next song, long press button for volume up;
press button for pause / play.
5. Hands Free Phone Call: press button to answer the
phone call, long press button for 3 seconds to refuse
the phone call. After the phone call finished, short press
button , the speaker will be back to work. Press M to
shift mode into AUX or MP3 mode. (Speaker with the
coming phone No. prompts function).
6. Press button M to turn off the speaker when don’t need
it on work, to save the power. (The speaker will turn off
automatically if it doesn’t work and have got no operate
instruction within 10 minutes.)
1. It cannot be matched with the devices by Bluetooth: (1)
turn off the speaker and mobile phone, and then turn on
both, rematch. (2) Too many Bluetooth devices surround,
turn off the other Bluetooth devices.
2. Sound too small or distortion too much: (1) may be
battery runs out. Please charge it. (2) Turn up the volume of
the mobile phone.
3. Sound off and on: please check if the range between the
speaker and the device is more than 10 meters. Or check if
there are any barrier between the speaker and the device.
Specification
Model number V2
Bluetooth version
Battery
2600mAh
4.2
Power output 10W*2
Bluetooth range
Power input
≤10 meter
DC5V 2000mA
warning:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the
party responsible for compliance
Repair by this card please keep it
Model No.:
Purchasing Date:
User Name:
Telephone No.:
Warranty Card
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio
or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
FCC ID: 2AN4U-V2
Loading...