1
Ceiling Fan
Manual
2
※SIZE：602x602x190mm WEIGHT：5.2-5.4kg
1. The installing diagram is at the left hand side.
2. Please make sure the size of ceiling tile is 600 x 600 mm.
3. Let the person who has technical qualification do the
installing.
4. Please use the switch with security certificate.
5. Please double check the voltage before installing.
6. If installing several ceiling fans, there are at least 4 ceiling
tiles between two ceiling fans.
7. Make sure the ceiling tile can sustain 20 kg before
installing.
Model
Voltage
R.P.M
Power
Consumption
(Maximum)
Y16-AC
Y15-AC
Y14-AC
110V
60Hz
High
45~43 W
Medium
40~31 W
Low
36~24 W
Y16-DC
Y15-DC
Y14-DC
110V
220V
50/60Hz
High
25~22 W
Medium
15~12 W
Low
10~8 W
Y16-AC-2
Y15-AC-2
Y14-AC-2
220V
50/60Hz
High
45 W
Medium
35 W
Low
25 w
Ceiling Fan
Notice of Installing
3
1. Ceiling fan × 1 unit
2. Remote control with batteries × 1 set
★Please use the wire is 1.6mm-2.0mm
1. Remove the ceiling tile 2. Put the ceiling fan to the
ceiling
3. Let the ceiling fan still horizontal with ceiling.
4. Connect with the wire
Please turn off /disconnect the power before installing!
Installation Guide
Standard Equipment
4
1. Please do not block the blades or the turntable when the ceiling
fan is operating.
2. Please do not use any spray on the ceiling fan.
3. The limitation of environment
A. The voltage have to within the certain range: 110V±10%/220V
±10%
B. Temperature of environment：0 ~ 45℃
C. Humidity of environment ≦ 80%
3. This product cannot use at the environment with a lot of dust and
soot.
4. Please do not refit by yourself or replace any parts which are not
from the manufacturer.
5. Please do the maintenance periodically.
There are 4 speeds modes (high,
medium, low and natural wind).
There is the switch of turntable. Turn
it on for cycling or set it in a certain
direction.
The battery of remote control is
No.4 battery. (1.5Vx2)
Please remove the batteries if you
don’t use the remote control.
Please do the recycling for
Notice of operating
Manual of remote control
High speed
Medium speed
Low speed
Natural wind
mode
Turntable
switch
Power
switch
Light of power
5
discarding batteries.
1. Please turn off /disconnect the power before
dismantling and do the maintenance.
2. Take apart the housing
(The housing of Y14-Fan series are different, but the
way of dismantling is the same )
Dismantling and Maintenance
Take out the screws
at the corners of
housing (4 Pcs)
Take out the housing
Please notice
the relative
position when
assembling
6
3. Dismantle the blades
Loose the center clockwise and take out the blades
When do the installation,
the blades have to install
properly on the axis.
7
Do not wash the base of ceiling fan by water. The blades and the
center are washable, but they have to be dry before assembling.
4. Dismantle the turntable
Please do not wash the housing by water. The turntable and the
Loose the cover of turntable anticlockwise
and take out the turntable
When do the installation, the turntable
have to install on the fixed mount.
8
cover of the turntable are washable, but they have to be dry
before assembling.
Ya Suh Dar Co.,Ltd
Head Office
No.332,Lane 549,Sec.2,Sanfang Road, Fengyuan Dist.,
Taichung, Taiwan 42073
04-25278062
04-25293889
yasuda.fan@msa.hinet.net
Remote control is not
operating
The batteries are out of
power or loosened
Check the batteries
Fan is not operating
The power is off
Check the power
Turntable is not
operating
Did not assemble properly
Please follow the
instruction of manual and
do the reassembling
Strange noises
Installed unevenly
Do the installation again
There are foreign objects
in the ceiling fan
Check the inner of
ceiling fan
Simple Troubleshooting
Loading...