Yardworks YW1100PP Instruction Manual

0312

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions
for future reference.

Instruction Manual

1100W Automatic Pressure Pump
+ Integrated Pressure Head

Model: YW1100PP

TABLE OF CONTENTS

WARRANTY………………………………………….
INTRODUCTION ………………………………………
SPECIFICATIONS……………………………………..
KNOW YOUR PRODUCT

……………………………….

PACK CONTENTS…………………………………….
ELECTRICAL SAFETY ………………………………….
DESCRIPTION OF SYMBOLS……………………………
GENERAL SAFETY INSTRUCTIONS……………………….
ADDITIONAL SAFETY INSTRUCTIONS FOR PUMPS………….
SET-UP & INSTALLATION……………………………...
OPERATION………………………………………….
MAINTENANCE ………………………………………
SPARE PARTS ……………………………………….
TROUBLESHOOTING ………………………………….

2
3
3
4
4
5
6
7
8
9
14
16
16
17

1

2

2 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 24 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes consumable parts, for example:
o-rings, bearing, seals, gaskets, filter, filter cover and accessories.

WARNING

The following actions will result in the warranty being void.

Professional, Industrial or high frequency use.
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.
If the tool is disassembled or tampered with in any way.

YardWorks

Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175

•

•

•

OW11

WARRANTY

YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER

TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO

YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT.

PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.

`

Australia 1800 069 486

New Zealand 0508 069 486

INTRODUCTION

Congratulations on purchasing the YARDWORKS 1100W Automatic Pressure Pump + Integrated
Pressure Head.
We aim to provide quality products at an affordable price. Before using, it is most important that
you read and follow the instructions in this manual, even if you feel you are quite familiar with
this type of product.
This product has been designed for numerous water transfer applications.
These include draining flooded laundries, bathrooms, basements or garages, emptying rainwater
tanks, pools and spas, emptying garden ponds and transferring water for domestic irrigation.

Input Voltage: 220 - 240V ~50Hz
Input Power: 1100W
Max. Lift: 8m
Max. Head: 45m
Max. Flow Rate: 4,600 litres/hour
Max. Particle Size: 5mm
Min. Water Temp: 0°C
Max. Water Temp: 35°C
Inlet/Outlet Size: 25.4mm (1")
Power Cable Length: 1.5m
IP Rating: IPX8

Weight: 10.52kg

SPECIFICATIONS

3

55

Max. Head

30

35

40

45

50

10

15

20

25

Flow rate (l/h)

0

5

KNOW YOUR PRODUCT

1. Discharge Outlet

2. Filter Cover

3. Suction Inlet

4. Pump Housing

5. Drain Screw

6. LCD Display Panel

7. Handle

8. Filter

9. Non Return Valve

10. Filter Cover Spanner

11. 25.4mm (1") Male Threaded Hose Adaptor

12. 25.4mm (1") Male Double Ended Adaptor

1 x Pressure Pump + Integrated Pressure Head (YW1100PP)
1 x Filter Cover Spanner
1 x Instruction Manual

1 x 25.4mm (1") Male threaded hose adaptor
1 x 25.4mm (1") Male double ended adaptor

2

PACKED CONTENTS

4

6

7

1

8

9

Note: Recommended items below are not included and are readily available from your local Bunnings store.

1 x Suitable hose/tube/pipe
1 x 25.4mm (1") Male threaded adaptor
Teflon tape

FITTINGS AND TOOLS REQUIRED FOR INSTALLATION

3

4

5

10

WARNING! THIS PRODUCT IS NOT SUITABLE FOR USE WITH DRINKING(POTABLE) WATER.

11 12

ELECTRICAL SAFETY

WARNING! When using mains-powered equipment, basic safety precautions, including the following,

should always be followed to reduce risk of fire, electric shock, personal injury and material damage.

Read and understand the manual prior to operating this pump.
Save these instructions and other documents supplied with this pump for future reference.
The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to

the voltage on the rating plate.
Note: The supply of 230V and 240V on Yardworks pumps are interchangeable for Australia and New Zealand.
This pump is earthed in accordance with AS/NZS 60335-2-41.
Note: The power outlet used for the water pump is recommended to be protected by a 30mA residual current device

or earth leakage circuit breaker.
If the power outlet is external, ensure that it is weather proof. If the supply cord is damaged, it must be replaced by

an electrician or a power tool repairer to avoid a hazard.
The water pump has a built-in thermal protection overload switch. The water pump stops if an overload occurs. The

motor restarts automatically after it has cooled down.

Using an extension lead

Always use an approved extension lead suitable for the power input of this product. Before use, inspect the
extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable
for the power input of this product or which is damaged or defective may result in a risk of fire and electric shock.

5