A: To energize the engine: Depress the clutch-brake pedal, parking brake must be set, lift and disengagement lever should be in DISENGAGE position, throttle control should be set to CHOKE then turn the ignition key to “START” position.
A: Ensure that battery is well connected, fuse is intact, battery is not flat, check for loose and blown fuses, blown connections.
A: You may activate the cutting blades whether the lawn mower is in motion or stationary; just remember to set the lift and disengaging lever to the disengaged setting prior.
A: The desired cut height should be set using the Deck Lift indicator and the wheel height adjusters set at the desired level.
A: For maintenance, it is key to examine the amount of oil inside the crankcase, scrape the air filter of dirt around it and scrape the interior part of the blade’s housing.