Specifications and Main Features
- Model: 41AD-Y28-G000
- Engine displacement: 28 cc
- Engine type: 2-cycle
- Idle speed range of the RPM: Minimum: 3,400 Maximum: 4,400
- RPM Range (operational): 7,000 to 7,500
- Oil to fuel Ratio: 32:1
- Weight: 13.6 lbs (6.17 kg) without fuel
- Cutting attachment type: Bump Head™
- Replacement line Acceptable diameter: 0.080 inch (2.03 mm)
- Spark arrestor incorporated in the machine for fire safety measures and other features.
- Starting the unit is made easier with incorporates primer bulb.
- A unit On/Off Stop Control feature is in the machine.
Frequently Asked Questions
Q: What type of fuel do I need to use?
A: Use clean and freshly made unleaded gasoline mixed with 2-cycle engine oil in the ratio of 32:1
Q: How do I start the trimmer?
A: The steps followed are—gas and oil are mixed together, the fuel tank is filled, the primer bulb pressed between 5 to 7 times, the choke is set to FULL and the starting rope is briskly pulled.
Q: Can I use any type of cutting line with this trimmer?
A: This is not correct as it is against the law, only 0.080 inch (2.03 mm) diameter genuine manufacturers replacement line has to be used.
Q: What do I do if the engine doesn’t crank?
For the given query we recommend checking if the On/Off Stop Control is set to START, topping up the fuel tank relative to the oil and pressing down the primer bulb for 5-7 times.
Q: What requires a trimmer to be maintained and how can I do so?
It includes routine servicing such as cleaning or replacing the trimmer’s air filter, examining the spark plug and checking if the spark arrestor has accumulated dirt.
User Manual
Loading...