The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
IMPORTANT!
Please record the serial number of this unit in the space below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.
SAFETY INSTRUCTIONS
1
Read Instructions — All the safety and operating
instructions should be read before the unit is operated.
Retain Instructions — The safety and operating
2
instructions should be retained for future reference.
3
Heed Warnings — All warnings on the unit and in
the operating instructions should be adhered to.
4
Follow Instructions — All operating and other
instructions should be followed.
5
Water and Moisture — The unit should not be used
near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement,
or near a swimming pool, etc.
6
Carts and Stands — The unit should be used only
with a cart or stand that is recommended by the
manufacturer.
6A
An unit and cart combination
should be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause the
unit and cart combination to overturn.
7
Wall or Ceiling Mounting — The unit should be
mounted to a wall or ceiling only as recommended
by the manufacturer.
8
Ventilation — The unit should be situated so that its
location or position does not interfere with its proper
ventilation. F or example, the unit should not be situated on a bed, sofa, rug, or similar surface, that ma y
block the ventilation openings; or placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
Heat — The unit should be situated aw ay from heat
9
sources such as radiators, stoves, or other appliances that produce heat.
ii
10
11
12
13
14
15
16
17
Power Sources — The unit should be connected to
a power supply only of the type described in the
operating instructions or as marked on the unit.
Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the unit.
Cleaning — The unit should be cleaned only as recommended by the manufacturer.
Nonuse Periods — The power cord of the unit
should be unplugged from the outlet when left
unused for a long period of time.
Object and Liquid Entry — Care should be taken so
that objects do not fall into and liquids are not
spilled into the inside of unit.
Damage Requiring Service — The unit should be
serviced by qualified service personnel when:
A.
The power-supply cord or the plug has been
damaged; or
B.
Objects have fallen, or liquid has been spilled
into the unit; or
C.
The unit has been exposed to rain; or
D.
The unit does not appear to operate normally or
exhibits a marked change in performance; or
E.
The unit has been dropped, or the enclosure
damaged.
Servicing — The user should not attempt service
the unit beyond those means described in the operating instructions. All other servicing should be
referred to qualified service personnel.
Power Lines — An outdoor antenna should be
located away from power lines.
18
Grounding or Polarization — Precautions should be
taken so that the grounding or polarization is not
defeated.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Address:
Yamaha Corporation of America
6600 Orangethorpe Ave.
Buena Park, CA90622
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that ma y cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
FCC INFORMATION (U.S.A)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses
radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guar antee that interference will
not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the
product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference , relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America 6600 Orangethorpe Ave. Buena Park, CA90622, U.S.A.
FOR CANADIAN CUSTOMERS
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT AND FULLY INSERT.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
POUR LES CONSOMMATEURS CANADIENS
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most
out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without
annoying blaring or distortion – and, most importantly,
without affecting your sensitive hearing.
Since hearing damage from loud sounds
is often undetectable until it is too late,
YAMAHA and the Electronic Industries
Association’s Consumer Electronics
Group recommend you to avoid prolonged
exposure from excessiv e volume levels.
iii
Cautions
Please read the following operating precautions before use:
• When you disconnect the AC adaptor from the AC
outlet, hold the plug, not the cord.
• If you plan not to use the YST-M45Ds for a while,
disconnect the AC adaptor from the AC outlet.
• Always disconnect the AC adaptor from the AC
outlet before making any connections.
• The YST-M45Ds do not contain any user serviceable parts. Refer all servicing to your Yamaha
dealer.
•
Never open the cabinet. If a foreign object drops
into the set, contact your dealer, and do not use the
YST-M45Ds. Otherwise, you may cause a fire.
• Do not expose the YST-M45Ds to temperature
extremes, direct sunlight, excessive dust, humidity,
or vibration.
• Position the YST-M45Ds on a le vel, stable surface.
Do not drop the YST-M45Ds, apply excessive
force to their controls, or put heavy items on top of
them.
• Do not place small metal objects on the speakers.
Otherwise, the object may fall, possibly causing an
injury.
• To protect the YST-M45D speakers, avoid microphone feedback, continuous and excessive output
from electronic musical instruments, and excessive
signal distortion.
• If the YST-M45Ds are located close to fluorescent
or neon lights, a slight hum may be heard. In this
case, relocate the YST-M45Ds away from the
light.
• Although the YST-M45D speakers are magnetically shielded, keep floppy disks and tapes away
from them.
• The YST-M45Ds may cause picture distortion
when located close to a television or computer
monitor. In this case, move them away a short distance.
• Avoid sources of hum (transformers, motors). To
prevent fire or electrical shock, do not expose to
rain and water.
• Do not use force on switches, knobs, or cables.
When you move the YST-M45D, first turn off the
power to the speakers, then disconnect the AC
adaptor from the A C outlet and the cables from the
connected devices.
• Always turn the volume control counterclockwise
to the minimum before starting to play the audio
source: increase the volume gradually to an appropriate level after the playback has started.
• Though this speaker is a magnetically shielded
type, there may be some influence on the monitor
picture depending on the type of monitor or the
placement of the speaker. In such a case, place the
speaker further apart from the monitor until there
is no influence on the monitor picture.
• When placing the provided AC adaptor on the
desk, etc., be sure to fix the adaptor on the desk,
etc. to prevent it from falling. If the adaptor falls, it
may cause personal injury or damage to the adaptor and/or other equipment.
Note for headphone:
When you use headphones, make sure that they have a
Thank you for purchasing the Yamaha YST-M45D Powered Multimedia Speakers.
The YST-M45D Multimedia Speakers utilize Advanced Yamaha Active Servo Technology, which offers exception-
ally high performance, allowing these compact speakers to produce a rich bass sound. They also employ USB technology to create a computer-based listening environment that is far superior to conventional multimedia speakers.
They reproduce a clearer sound, with less noise and distortion, and never require a soundcard!
Note:
Do not connect the PC using the USB cable before installing the USB driver.
Please inspect the package contents thoroughly for damage. If any item is missing or damaged, please contact the
dealer from whom you purchased the YST-M45D.
1
INPUT 1
English
INPUT 2
TO LEFT
SPEAKER
OUTPUT
(ADJ.VOL)
USB
INPUT
DC 15V
3.5 mm stereo
mini plug cable
(not included)
TO RIGHT
SPEAKER
2
RCA pin plug cable
3
USB Cable
4
POWERED MULTIMEDIA SPEAKERS YST-M45D
TM
LEFT
SPEAKER
1
3.5 mm stereo mini plug cable × 1 (Accessory)
2
RCA pin plug cable × 1 (Accessory)
3
USB cable × 1 (Accessory)
4
AC adaptor (PA-M30) × 1 (Accessory)
• The package also contains eight non-skid pads to attach to the bottom of the speakers.
VOLUME
BASS TREBLE 3D SURROUND
RIGHT
SPEAKER
AC adaptor
Actve Servo
ACTIVE SERVO PROCESSING
Technology
SUBWOOFER SYSTEM YST-MSW10
POWER
HIGH CUT
HIGH
LOW
VOLUME
SUBWOOFER
Warning:
Be sure to use the included AC adaptor. Using another AC adaptor may damage the speakers or cause a fire.
E-
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.