RX-495RDS/395 /395RDS
Natural Sound Stereo Receiver
Récepteur stéréo “Son Naturel”
Natural Sound Stereoreceiver
Natural Sound Stereoreceiver
Sintonizzatore stereo a suono naturale
Receptor estéreo de Sonido Natural
Natural Sound Stereo Ontvanger
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
SUPPLIED ACCESSORIES
ACCESSOIRES FOURNIS
MITGELIEFERTE ZUBEHÖRTEILE
MEDFÖLJANDE TILLBEHÖR
ACCESSORI IN DOTAZIONE
ACCESORIOS INCLUIDOS
BIJGELEVERDE ACCESSOIRES
●
After unpacking, check that the following parts are included.
●
Après le déballage, vérifier que les pièces suivantes sont incluses.
●
Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
●
Kontrollera efter det apparaten packats upp att följande delar finns med.
●
Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
●
Desembale el aparato y verificar que los siguientes accesorios están en la caja.
●
Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
●
Indoor FM Antenna
●
Antenne FM intérieure
●
UKW-Innenantenne
●
FM inomhusantenn
●
Antenna FM per interni
●
Antena FM interior
●
FM Binnenantenne
●
AM Loop Antenna
●
Cadre-Antenne AM
●
MW-Rahmenantenne
●
AM ramantenn
●
Antenna AM ad anello
●
Antena de cuadro de AM
●
AM Lusantenne
●
Remote Control Transmitter
●
Emetteur de télécommande
●
Fernbedienungsgeber
●
Fjärrkontrollsändare
●
Telecomando
●
Transmisor del control remoto
●
Afstandbediening
RX-495RDS
●
Batteries (size AA, R6, UM-3)
●
Piles (taille AA, R6, UM-3)
●
Batterien (Größe AA, R6, UM-3)
●
Batterier (storlek AA, R6, UM-3)
●
Batterie (dimensioni AA, R6, UM-3)
●
Pilas (tamaño AA, R6, UM-3)
●
Batterijen (maat AA, R6, UM-3)
RX-395, RX-395RDS
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or
87/308/EEC.
Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE.
Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG.
Dette apparat overholder det gaeldende EF-direktiv vedrørende radiostøj.
Questo apparecchio è conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi.
Este producto está de acuerdo con los requisitos sobre interferencias de radio frecuencia fijados por el Consejo Directivo
87/308 CEE.
Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.
2
FEATURES
Thank you for selecting this YAMAHA stereo receiver.
English
●
RX-495RDS
70W + 70W (8Ω) RMS Output
Power, 0.04% THD, 20–20,000 Hz
RX-395, RX-395RDS
45W + 45W (8Ω) RMS Output
Power, 0.04% THD, 20–20,000 Hz
●
High Dynamic Power, Low Impedance
Drive Capability
●
Continuously Variable Loudness Control
●
40-Station Random Access Preset Tuning
●
Automatic Preset Tuning
●
Preset Station Shifting Capability (Preset
Editing)
●
IF Count Direct PLL Synthesizer Tuning
System
●
SLEEP Timer
●
Remote Control Capability
●
RX-495RDS and RX-395RDS only
Multi-Functions for RDS Broadcast
Reception
●
RX-495RDS only
PURE DIRECT Switch to Reproduce the
Purest Source Sound
CONTENTS
Supplied Accessories ......................................2
Caution ............................................................4
Controls and Their Functions ..........................5
Connections ..................................................10
Basic Operations ...........................................14
Tuning Operations .........................................17
Preset Tuning ................................................18
Receiving RDS Stations
RX-495RDS and RX-395RDS only .............22
Notes about the Remote Control Transmitter
.......................................................................27
Troubleshooting .............................................28
Specifications ................................................29
3
CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.
1. To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2. Install this unit in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the unit to rain or water.
3. Never open the cabinet. If something drops into the set,
contact your dealer.
4. Do not use force on switches, controls or connection wires.
When moving the unit, first disconnect the power plug and
the wires connected to other equipment. Never pull the
wires themselves.
5. The openings on the cabinet assure proper ventilation of
the unit. If these openings are obstructed, the temperature
inside the cabinet will rise rapidly. Therefore, avoid placing
objects against these openings, and install the unit in wellventilated condition. Make sure to allow a space of at least
10 cm behind, on the both sides and above the top panel
of the unit. Otherwise it may not only damage the unit, but
also cause fire.
6. Always set the VOLUME control to “–
the audio source play. Increase the volume gradually to an
appropriate level after playback has been started.
” before starting
∞
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the main lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Make sure that neither core is connected
to the earth terminal of the three pin plug.
7. Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding that
the unit is faulty.
9. When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
10.To prevent lightning damage, disconnect the AC power
plug and disconnect the antenna cable when there is an
electrical storm.
11.Grounding or polarization – Precautions should be taken
so that the grounding or polarization of an appliance is not
defeated.
12.AC outlet
Do not connect audio equipment to the AC outlet on the
rear panel if that equipment requires more power than the
outlet is rated to provide.
IMPORTANT
Please record the serial number of this unit in the space
below.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
4
CONTROLS AND THEIR FUNCTIONS
YAMAHA HIFI SYSTEM
REMOTE CONTROL TRANSMITTER
REC/PAUSE
DIR BDIR A
DISC
SLEEP
A/B/C/D/E
PRESET
–+
A/B
TUNER
CD
PHONO
AUX
PLAY
PLAY
VOLUMEPOWER
1
2
2
3
5
4
TAPE 2
TAPE 1
1
TAPE
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the
CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this
remote control transmitter will also control various functions of each component.
For Control of This Unit
1
5
RX-395, RX-395RDS RX-495RDS
Tuner keys
Controls tuner.
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
2 SLEEP timer key
The power to this unit is automatically turned off one hour after
this key is pressed (so that “SLEEP” lights up on the display).
3 POWER key
Turns the power on/off.
* While the power is on, pressing the POWER key on the
remote control transmitter switches the unit from the
power-on mode to the standby mode, and vice versa. (In
the standby mode, the power indicator on the front panel is
half illuminated.)
4 VOLUME +/– keys
Turns the volume level up/down.
English
5 Input selector keys
Selects input source.
For Other Component Control
Identify the remote control transmitter keys with your
component’s keys. If these keys are identical, their functions
will be the same. On each key function, refer to the
corresponding instruction on your component’s manual.
1 Tape deck keys
Controls tape deck.
DIR A, B and A/B are applicable only to double
*
cassette tape deck.
For a single cassette deck with automatic reverse
*
function, pressing DIR A will reverse the direction of
tape running.
2 CD player keys
Controls compact disc player.
DISC is applicable only to compact disc changer.
*
5
FRONT PANEL
21A/B/C/D/E 3 4
6578
TAPE
MONITOR
AUX PHONO
TUNER CD
POWER
RDS MODE/FREQ
PTY SEEK EON TUNING MODE
AUTO/MAN'L MONO
FM/AM TUNING EDIT MEMORY
MAN'L/AUTO FM
DOWN UP
MODE START
SPEAKERSPHONES
A
ON
OFF
B
ON
OFF
VOLUME
NATURAL SOUND STEREO RECEIVER
BASS
55
4
3
2
l0l
2
3
4
TREBLE
55
4
3
2
l0l
2
3
4
BALANCE
55
4
3
2
l0l
2
3
4
LR
LOUDNESS
57
6
4
3
2
l
FLAT
I0
9
8
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB
PRESET STATIONS
PRESET
MHz
MEMORY
AM
FM
TAPE MONITOR 12
STEREO
0
20
l00
ENTER
SLEEP
AUTO TUNING
-
30dB
RX-495RDS
132456789 0 A
NATURAL SOUND STEREO RECEIVER
POWER
RDS MODE/FREQ
SPEAKERSPHONES
A
B
ON
ON
OFF
OFF
PRESET
AM
FM
ENTER
MEMORY
TAPE MONITOR 12
PTY SEEK EON TUNING MODE
MODE START
AUTO/MAN'L MONO
2
3
4
STEREO
MHz
20
l00
0
SLEEP
AUTO TUNING
FM/AM TUNING EDIT MEMORY
DOWN UP
MAN'L/AUTO FM
BASS
l0l
2
3
4
55
TREBLE
l0l
2
3
4
55
2
3
4
BALANCE
l0l
2
3
4
55
LR
TUNER CD
MONITOR
TAPE 1TAPE 2
COPY
2
3
4
AUX PHONO
PRESET STATIONS
21A/B/C/D/E 3 4
6578
LOUDNESS
FLAT
l
-
30dB
2
I0
3
4
9
8
57
6
24
28
34
40
50
60
70
BCDEFG H IJKL M
RX-395, RX-395RDS
: RX-395RDS only
132456789 0
PURE DIRECT
VOLUME
l6
l8
20
–dB
l4
l2
l0
8
6
4
3
2
l
0
BCDEFG H IJKL M
6
English
PHONES
1 POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
* Standby mode
While the power is on, pressing the POWER key on the
remote control transmitter switches the unit to the standby
mode. (In this mode, the power indicator is half illuminated.)
2 Power indicator
Lights up while the power is on.
3 Remote control sensor
Receives signals from the remote control transmitter.
4 RDS MODE/FREQ button
RX-495RDS and RX-395RDS only
When an RDS station is received, pressing this button changes
the display mode into the PS mode, PTY mode, RT mode and/or
CT mode (if the station employs those RDS data services), and
frequency display in turn.
5 Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
6 FM/AM buttons
Press this button to switch the reception band to FM or AM.
7 TUNING DOWN/UP button
Used for tuning. Press the “UP” side to tune in to higher
frequencies, and press the “DOWN” side to tune in to lower
frequencies.
8 EDIT button
This button is used to exchange the places of two preset
stations with each other.
9 MEMORY (MAN’L/AUTO FM) button
When this button is pressed, the MEMO(RY) indicator flashes
for about 5 seconds. During this period, press the desired
PRESET STATIONS button to enter the displayed station into
the memory.
When this button is pressed and holded for about 3 seconds,
the automatic preset tuning begins.
0 Input selector buttons
Select a program source to listen to. When a button is
pressed, the name of selected source lights up on the display.
A PURE DIRECT switch
RX-495RDS only
Press this switch to listen to a source in the purest sound.
(Refer to page 16 for details.)
C SPEAKERS switches
Set the switch A or B (or both A and B) for the speaker system
(connected to this unit) you will use to the ON position. Set the
switch for the speaker system you will not use to the OFF
position.
D PTY SEEK MODE button
RX-495RDS and RX-395RDS only
When this button is pressed, the unit turns into the PTY SEEK
mode.
E PTY SEEK START button
RX-495RDS and RX-395RDS only
Press this button to begin searching for a station after the desired
program type is selected in the PTY SEEK mode.
F EON button
RX-495RDS and RX-395RDS only
Press this button to select a desired program type (NEWS,
INFO, AFFAIRS, SPORT) when you want to call a radio
program of that program type automatically.
G TUNING MODE (AUTO/MAN’L) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that “AUTO (TUNING)” lights up on the display. To
select the
(TUNING)
manual tuning mode, press this button so that “
” goes off.
AUTO
H Tone controls
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
I BALANCE control
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
J A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
K PRESET STATIONS buttons
Used to enter as many as 40 station frequencies into the
memory.
L Continuously variable LOUDNESS control
Used to compensate for the human ears’ loss of sensitivity to
high and low-frequency ranges at low volume.
B PHONES jack
When you listen with headphones,
connect the headphones to the
PHONES jack. When listening with
headphones privately, set both the
SPEAKERS A and B switches to the
OFF position.
M VOLUME control
Used to raise or lower the volume level.
7
DISPLAY PANEL
MHz
MEMO PS
STEREO
0
20
l00
PTY HOLD EON
NEWS INFO AFFAIRS SPORT
AUTO
RT CTPTY
SLEEP
TAPE MON TAPE MON
1 2
AUTO TUNING
PRESET
STEREO
0
MHz
40 6020l00
MEMORY
SLEEP
TAPE MONITOR
FM
RX-495RDS, RX-395RDS
56 789 0
1324
A
RX-395RDS RX-495RDS
RX-395
50A
13
4
2
8
English
1 Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected program source.
2 AUTO (AUTO TUNING) indicator
This indicator lights up when this unit is in the automatic tuning
mode.
3 STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
4 Signal-level meter
Indicates the signal level of the received station.
If multipath interfernce is detected, the indication decreases.
5 MEMO (MEMORY) indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and one of the PRESET STATIONS buttons.
6 RDS mode indicators
RX-495RDS and RX-395RDS only
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode
is now selected.
7 PTY HOLD indicator
RX-495RDS and RX-395RDS only
Lights up while the search is performed in the PTY SEEK
mode.
8 EON indicator
RX-495RDS and RX-395RDS only
Lights up when an RDS station that employs the EON data
service is received.
9 Program type name indicators
RX-495RDS and RX-395RDS only
The name selected in the EON mode lights up.
0 SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
A TAPE MON (TAPE MONITOR) indicator
RX-395, RX-395RDS
Lights up when the tape deck is selected as the input source
by pressing the TAPE MONITOR button.
RX-495RDS
When the first tape deck is selected as the input source by
pressing the TAPE 1 button, “TAPE MON 1” lights up, and
when the second tape deck is selected by pressing the TAPE 2
button, “TAPE MON 2” lights up.
9
CONNECTIONS
FM
ANT
AM
ANT
GND
75Ω
UNBAL.
PHONO CD AUX TAPE 1 TAPE 2
or or
TAPEPBREC
OUT
TAPEPBREC
OUT
A OR B : 8ΩMIN./SPEAKER
A B : l6
Ω
MIN./SPEAKER
SPEAKERS
A
B
AC OUTLETS
SWITCHED
l00W MAX. TOTAL
315 4 6 3 4
MAINS
GND
OUTPUT
LINE OUT
LINE IN
LINE OUT
LINE IN
AUDIO OUT
OUTPUT
GND
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
CONNECTIONS WITH OTHER COMPONENTS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)
to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.
If you have YAMAHA components numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily by making
*
sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
RX-495RDS
Turntable Tape deck 2Tape deck 1
Speakers A
Right Left
(Europe model)
Compact disc player
Video cassette player,
LD player, etc.
:Refer to “ABOUT THE ACCESSORY TERMINALS” on page 12.
10
Right Left
Speakers B
To AC outlet
RX-395, RX-395RDS
FM
ANT
AM
ANT
GND
75Ω
UNBAL.
PHONO CD AUX TAPE
or or
TAPEPBREC
OUT
A OR B : 8ΩMIN./SPEAKER
A B : l6
Ω
MIN./SPEAKER
SPEAKERS
A
B
AC OUTLETS
SWITCHED
l00W MAX. TOTAL
315 4 6
MAINS
GND
OUTPUT
LINE OUT
LINE IN
AUDIO OUT
OUTPUT
GND
English
Turntable Tape deck
Speakers A
Right Left
(Europe model)
Compact disc player
Video cassette player,
LD player, etc.
:Refer to “ABOUT THE ACCESSORY TERMINALS” on page 12.
Right Left
Speakers B
To AC outlet
11
CONNECTING SPEAKERS
1
2
3
FM
ANT
AM
ANT
GND
75Ω
UNBAL
GND
Connect the SPEAKERS terminals to your speakers with wire
of the proper gauge, cut as short as possible. If the
connections are faulty, no sound will be heard from the
speakers. Make sure that the polarity of the speaker wires is
correct, that is, + and – markings are observed. If these wires
are reversed, the sound will be unnatural and will lack bass.
Do not let the bare speaker wires touch each other and do
not let them touch the metal parts of this unit as this could
damage this unit and/or speakers.
How to Connect:
Red: positive (+)
Black: negative (–)
Unscrew the knob.
➀
Insert the bare wire.
➁
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
Tighten the knob and
➂
secure the wire.
Notes
●
One or two speaker systems can be connected to this unit.
If you connect only one speaker system, connect it to either
the SPEAKERS A or B terminals.
●
Use speakers with the specified impedance shown on the
rear of this unit.
ABOUT THE ACCESSORY TERMINALS
AC OUTLET(S) (SWITCHED)
(Europe and Singapore models) ...... 2 SWITCHED OUTLETS
(U.K. model) ........................................ 1 SWITCHED OUTLET
Use these to connect the power cords from your components
to this unit.
The power to the SWITCHED outlets is controlled by this unit’s
POWER switch or the provided remote control transmitter’s
POWER key. These outlets will supply power to any
component whenever this unit is turned on.
The maximum power (total power consumption of
components) that can be connected to the SWITCHED AC
OUTLET(S) is 100 watts.
GND terminal (For turntable use)
Connecting the ground wire of the turntable to the GND
terminal will normally minimize hum, but in some cases better
results may be obtained with the ground wire disconnected.
Use one of the two GND terminals on the rear of this unit for
the connection.
Turntable
or
Loosen Tighten
12
ANTENNA CONNECTIONS
FM
GND
ANT
AM
ANT
GND
75Ω
UNBAL.
PHONO CD AUX
1
Outdoor FM antenna
Indoor FM
antenna
(included)
75-ohm/300-ohm
antenna adapter
75-ohm
coaxial cable
300-ohm
feeder
Outdoor AM antenna
AM loop
antenna
(included)
Ground
➀
➁
➂
●
Each antenna should be connected to the designated terminals correctly, referring to the following diagram.
●
Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal
strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience
poor reception quality, an outdoor antenna may result in improvement.
English
Connecting the AM loop antenna
12 3
* The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
* The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.
GND terminal
For maximum safety and minimum interference, connect the
GND terminal to a good earth ground. A good earth ground is
a metal stake driven into moist earth.
Notes
●
●
When connecting the indoor
FM antenna, insert its
connector into the FM ANT
terminal firmly.
If you need an outdoor
FM antenna to improve
FM reception quality, either
300-ohm feeder or coaxial cable may be used. In locations
troubled by electrical interference, coaxial cable is
preferable.
Orient so that the best
reception is obtained.
13
BASIC OPERATIONS
SPEAKERS
A
ON
OFF
B
ON
OFF
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
COPY
TAPE
MONITOR
AUX PHONO
TUNER CD
TO PLAY A SOURCE
1
Set to the “ ∞” position.
2
4
3
1, 6
7
4 Select the speakers to be used.
* If you use two speaker systems, press both the A and
B switches.
2 Turn the power on.
POWER
3 Select the desired input source by using the input
selector buttons.
RX-495RDS
RX-395, RX-395RDS
* The name of the selected input source will appear on the
display.
* Note that pressing on each input selector button selects the
source which is connected to the corresponding input
terminals on the rear panel.
14
5 Play the source. (For detailed information on the
tuning operation, refer to page 17.)
6
Adjust to the desired output level.
7 If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (refer to page 16).
Notes
RX-495RDS only
●
If you select AUX, TUNER, CD or PHONO, be sure that
TAPE 1 and/or TAPE 2 are not being selected.
●
If you select TAPE 1 and TAPE 2 at the same time, the
result will be the sound from the tape deck 1.
●
For TAPE 1 and TAPE 2, whenever the button is pressed,
the corresponding input source is selected or canceled
alternately.
RX-395 and RX-395RDS only
●
Whenever the TAPE MONITOR is pressed, the tape deck
is selected or canceled alternately.
●
If both TAPE MONITOR and another input selector button
are selected, TAPE MONITOR takes priority of another
input selector button.
To turn off the power
Press the POWER switch again.
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
COPY
TAPE 1TAPE 2
MONITOR
AUX PHONO
TUNER CD
COPY
TAPE
MONITOR
AUX PHONO
TUNER CD
TAPE
MONITOR
AUX PHONO
TUNER CD
TO RECORD A SOURCE TO TAPE
1, 4
RX-495RDS RX-395, RX-395RDS
English
2
1 Select the source to be recorded.
* To dub from tape to tape, refer to the “Notes” shown
below.
* When you select AUX, TUNER, CD or PHONO, make
sure that neither TAPE 1 nor TAPE 2 is also selected.
2 Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 17.)
3 Begin recording on the tape deck.
4 To monitor the audio signals being recorded, press the
input selector button for the tape deck being used to
make the recording.
1 Select the source to be recorded.
* When you select AUX, TUNER, CD or PHONO, make
sure that TAPE MONITOR is not also selected.
2 Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 17.)
3 Begin recording on the tape deck.
4 To monitor the audio signals being recorded, press the
TAPE MONITOR.
Notes
●
VOLUME, BASS, TREBLE, BALANCE, LOUDNESS
controls and PURE DIRECT switch settings have no effect
on the material being recorded.
●
To dub from tape to tape, select TAPE 2 by pressing it.
Only the following method of dubbing can be made by using
this unit.
SOURCE
Tape deck connected to
the TAPE 2 terminals.
→
RECORDER
Tape deck connected to
the TAPE 1 terminals.
Note
VOLUME, BASS, TREBLE, BALANCE and LOUDNESS
control settings have no effect on the material being recorded.
15
Selecting the SPEAKER system
SPEAKERS
A
ON
OFF
B
ON
OFF
BALANCE
55
4
3
2
l0l
2
3
4
LR
TREBLE
55
4
3
2
l0l
2
3
4
BASS
55
4
3
2
l0l
2
3
4
LOUDNESS
57
4
3
2
l
FLAT
l0
9
8
6
30 dB
LOUDNESS
57
4
3
2
l
FLAT
l0
9
8
6
30 dB
VOLUME
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB
PURE DIRECT
Because one or two speaker systems can be connected to this
unit, the SPEAKERS switches allow you to select speaker
system A or B, or both at once.
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
Using the PURE DIRECT switch
RX-495RDS only
You can enjoy the purest possible sound from your audio
sources by pressing this switch inward. By doing so, the audio
signal bypasses the BASS, TREBLE, BALANCE and
LOUDNESS controls, eliminating any alterations to the audio
signal.
Adjusting the continuously variable
LOUDNESS control
This control provides compensation for the human ears’ loss of
sensitivity to high and low-frequency ranges at low volume.
This control is adjustable to retain full tonal range at any
volume level.
1
Adjusting the BASS and TREBLE
controls
BASS : Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Set to the “FLAT” position.
2
Set to the loudest listening
level that you would listen
to.
3
Turn until the desired
volume is gained.
16
FM/AM
FM AM
or
TUNING OPERATIONS
FM/AM
TUNING MODE
AUTO/MAN'L MONO
TUNING MODE
AUTO/MAN'L MONO
TUNING
DOWN UP
TUNING
DOWN UP
AUTO
AUTO TUNING
FM AM
or
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
English
2
1 3
AUTOMATIC TUNING MANUAL TUNING
1 Select the reception band (FM or AM) confirming it on
the display.
2
1 Select the reception band (FM or AM) confirming it on
the display.
2
Turn “AUTO (TUNING)”
off.
RX-395
RX-495RDS,RX-395RDS
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
3 Tune to a desired station manually.
* To continue tuning search, press and hold the button.
Notes
• If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
•
RX-495RDS and RX-395RDS only
When tuned in to a station, the frequency of the received
station is shown on the display. If an RDS station that
employs PS data service is received, the frequency is then
replaced by the station name. Refer to page 24 for details.
17
PRESET TUNING
A/B/C/D/E
PRESET
2134
6578
PRESET STATIONS
PRESET
MHz
FM
0
20
l00
40 60
MHz
PS
0
20
l00
RT CTPTY
MEMORY
MAN'L/AUTO FM
MEMO
MEMORY
MANUAL PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using the PRESET STATIONS buttons. With this function,
you can recall any desired station by only pressing the corresponding PRESET STATIONS button. Up to 40 stations (8 stations x 5
groups) can be stored.
2
4
3
To store stations
1 Tune to a desired station.
(Refer to the previous page for tuning procedure.)
2 Select a desired group (A – E) of preset stations
confirming it on the display.
RX-495RDS, RX-395RDSRX-395
3
4 Select a preset station number where you want to
program the station before “MEMO(RY)” goes off from
the display.
RX-395
Shows the
displayed station
RX-495RDS, RX-395RDS
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to preset station numbers
on other groups in the same way by selecting other
groups in step 2.
has been
programmed to
A1.
RX-495RDS, RX-395RDSRX-395
Flashes on and off for about 5 seconds.
18
To recall a preset station
PRESET
A/B/C/D/E
2134
6578
PRESET STATIONS
English
1
2
1 Select the group of preset stations.
RX-495RDS, RX-395RDSRX-395
2 Select the preset station number.
Notes
●
A new setting can be programmed in place of the former
one.
●
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is
cut for more than one week, the memory may be erased. If
so, it can be re-programmed by simply following the PRESET
TUNING steps.
RX-495RDS, RX-395RDSRX-395
PRESET
19
FM/AM
FM
MEMORY
MAN'L/AUTO FM
AUTOMATIC PRESET TUNING
MEMO
AUTO
MEMORY
AUTO TUNING
You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 18.
* RX-495RDS and RX-395RDS only
Only RDS stations can be stored by this function.
To store stations
1 2
1
2
RX-395
RX-495RDS,RX-395RDS
The automatic preset tuning begins from A1. Received
stations are programmed to A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups
(B, C, D and E) in that order.
RX-395 only
If you want to store the first station received by the
automatic preset tuning to a desired preset station
number.
If, for example, you want to store the first received station to
C5, select “C5” by using the A/B/C/D/E button and the
PRESET STATIONS buttons after pressing the MEMORY
button in step 2 before the automatic preset tuning begins. The
first received station is stored to C5, and next stations to C6,
C7 ... sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.
Press and hold for
about 3 seconds.
Flashes.
Flashes.
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 19.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on page 19.
RX-495RDS and RX-395RDS only
*
A recalled station is shown by the frequency or station name
on the display.
Notes
●
If no station is received by the automatic preset tuning
search, the search finishes after
about 3 seconds on the display.
●
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 18.
RX-395 only
●
If the number of received stations is not enough to be stored
up to E8, the search will be finished automatically when it
reaches the highest frequency after searching through all
frequencies.
●
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 18.
RX-495RDS and RX-395RDS only
●
The automatic preset tuning search is performed through all
RDS network frequencies until stations are stored up to E8.
If the number of received stations is not enough to be stored
up to E8, the search will be finished automatically after
searching all frequencies.
●
With this function, only RDS stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 18.
* There may be a case that this function cannot receive a
station which could be received by the automatic tuning
method. This is because this function receives a large
volume of PI (Program Identification) data along with the
station.
“NOTHING” flashes for
20
EXCHANGING PRESET STATIONS
EDIT
EDIT
MEMO
MEMORY
MEMORY
MEMO
You can exchange the places of two preset stations with each other as shown below.
2, 4
Example)
If you want to shift the preset station on E1 to A5, and vice
versa.
English
1 Recall the preset station on E1 (by following the method
of “To recall a preset station” on page 19).
2
RX-495RDS, RX-395RDSRX-395
Flashes.
Flashes.
3 Next, recall the preset station on A5 by following the
same method with step 1.
4
RX-395
RX-495RDS, RX-395RDS
Shows the exchange of
stations is completed.
RX-495RDS, RX-395RDSRX-395
Flashes.
Flashes.
21
In areas where RDS broadcasts cannot be received, the RDS broadcast functions do not operate. (The procedures from page 22 to
PS
STEREO
0
20
l00
EON
NEWS INFO AFFAIRS SPORT
AUTO
RT CTPTY
page 26 are not necesssary.)
RECEIVING RDS STATIONS
RX-495RDS
RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations
using this system transmit an inaudible stream of data in addition to the normal radio signal.
RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT
(Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc.
RDS function is carried out among the network stations.
* This unit utilizes PI, PS, PTY, RT, CT and EON to receive RDS broadcast stations.
and
RX-395RDS
only
Displaying RDS data
This unit can be turned into the following five modes to display
RDS data.
PS (Program Service name) mode:
Displays the name of the RDS station now being received
instead of the frequency.
PTY (Program Type) mode:
Displays the type of the program on the RDS station now being
received. There are 15 program types to classify RDS
stations. Refer to the next page for details.
RT (Radio Text) mode:
Displays information about the program (such as title of the
song, name of the singer, etc.) on the RDS station now being
received.
CT (Clock Time) mode:
Displays current time. This signal comes from the RDS station
now being received.
EON (Enhanced Other Networks)
mode:
Automatically receives a program of the designated program
type when its broadcast starts, in place of the program now
being received. When the broadcast of the called program
ends, the previously received program (or another program on
the same station) is recalled.
22
Programs types in the PTY mode
English
NEWS
NEWS
AFFAIRS
AFFAIRS
INFO
INFO
SPORT
SPORT
EDUCATE
EDUCATE
DRAMA
DRAMA
CULTURE
CULTURE
SCIENCE
SCIENCE
News:
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
Current affairs:
Topical program expanding or enlarging
upon the news, generally in different
presentation style or concept, including
documentary debate, or analysis.
Information:
Program whose purpose is to impart advice
in the widest sense, including
meteorological reports and forecasts,
consumer affairs, medical help, etc.
Sport:
Program concerned with any aspect of
sport.
Education:
Program intended primarily to educate, of
which the formal element is fundamental.
Drama:
All radio plays and serials.
Culture:
Programs concerned with any aspect of
national or regional culture, including
religious affairs, philosophy, social science,
language, theatre, etc.
Science:
Programs about the natural sciences and
technology.
VARIED
POP M
ROCK M
M.O.R. M
LIGHT M
CLASSICS
OTHER M
Varied:
Used for mainly speech-based programs
usually of light-entertainment nature, not
covered by above categories. Examples
are: quizzes, panel games, personality
interviews, comedy and satire.
Pop:
Commercial music, which would generally
be considered to be of current popular
appeal, often featuring in current or recent
record sales charts.
Rock:
Contemporary modern music, usually
written and performed by young musicians.
M.O.R.:
(Middle of the Road Music). Common term
to describe music considered to be “easylistening”, as opposed to Pop, Rock or
Classical. Music in this category is often but
not always, vocal, and usually of short
duration (<5 min.)
Light classics:
Classical Musical for general, rather than
specialist appreciation. Examples of music
in this category are instrumental music, and
vocal or choral works.
Serious classics:
Performances of major orchestral works,
symphonies, chamber music etc., and
including Grand Opera.
Other music:
Musical styles not fitting into any of the
above categories. Particularly used for
specialist music, of which Jazz, Rhythm &
Blues, Folk, Country, and Reggae are
examples.
23
Changing the RDS modes
RDS MODE/FREQ
When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station
light up on the display. By pressing the RDS MODE/FREQ button once or more, you can change the display mode among the RDS
modes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot be selected.)
Illumination of the indicator on the head of a name of RDS mode shows that the corresponding RDS mode is now selected.
* When an RDS station is received, do not press the RDS MODE/FREQ button until one or some names of RDS modes light up on
the display. If the button is pressed before one or some names light up on the display, the mode cannot be changed. This is
because the unit has not received all of the RDS data on the station yet.
* If no name of RDS mode lights up on the display, the mode cannot be changed.
PS mode The name of the station being received is displayed.
If the station does not employ the PS data service, this mode
will not be selected.
PTY mode The type of the program on the station being received is
displayed. If the station does not employ the PTY data
service, this mode will not be selected.
(
You can make this unit search for a station which is
broadcasting a program of your desired program type. For
details, refer to the next page.)
RT mode Information about the program on the station being received
is displayed. Information is displayed by a maximum of 64
Roman Alphabets including umlaut sign. If other characters
are used on the RT data, they are displayed with under-bars.
If the station does not employ the RT data service, this mode
will not be selected.
CT mode Current time is displayed in the following form. The CT data
from the station being received changes every minute.
Hour Minute
If the data is accidentally cut off, “CT WAIT” may light up.
If the station does not employ the CT data service, this mode
will not be selected.
Frequency The frequency of the station being received is displayed.
display mode
Notes
●
RDS data service cannnot be utilized by this unit if the received signal is not strong enough. Especially, the RT (Radio Text
mode) needs much data to be received, so it may occur that RT mode cannot be displayed even if other RDS modes (PS, PTY,
etc.) are displayed.
●
There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press the TUNING MODE
button so that “AUTO (AUTO TUNING)” goes off from the display. Though the reception mode is changed to monaural by this
operation, when you change the display to an RDS mode, RDS data may be displayed.
●
If the signal strength gets weakened by external interference during receiving an RDS station, the RDS data service may be cut
off suddenly and “
...
WAIT” will light up on the display.
24
Calling a program of your desired program type
PTY SEEK EON
MODE START
TUNING
DOWN UP
PTY SEEK EON
MODE START
from among preset RDS stations (PTY SEEK)
By designating a program type, the unit automatically searches all preset stations for an RDS station which broadcasts a program of
that program type.
* There are 15 program types to classify RDS stations. For details, refer to page 23.
3
English
1
1 Turn the unit into the PTY SEEK mode.
Flashes.
* The program type of the station now being received or
“NEWS” flashes on the display.
2 Select the desired program type.
2
3 Begin searching all preset RDS stations.
PS
RTCTPTY
PTY HOLD
Flashes.
* “PTY HOLD” lights up on the display.
●
If a station which broadcasts a program of the program
type is found, the unit stops at the station and displays the
frequency of the station. If the station has PS data, after
that, it turns into the PS mode.
●
If the called station is not the desired one, press the PTY
SEEK START button once more.
The unit begins searching for another station which
brodcasts a program of the same program type.
●
If no station is found, “NOTHING” appears and then
returns to frequency display. If the station has PS data,
after that, it turns into the PS mode.
* If the PTY SEEK START button is pressed once more
during searching, this mode is canceled and turns into
the frequency display. If the station has PS data, after
that, it turns into the PS mode.
AUTO
STEREO
20
0
To cancel this function
If the PTY SEEK MODE button is pressed once more, the
PTY SEEK mode is canceled and turns into the frequency
display. If the station has PS data, after that, it turns into the
PS mode.
25
Making this unit call a program of your desired program type automatically
Hz
PTY SEEK EON
MODE START
MHz
PS
STEREO
0
20
l00
EON
RT CTPTY
when its broadcast starts
This function uses the EON (Enhanced Other Networks) data service on the RDS station network.
By only selecting a desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches all preset RDS
stations for a station that broadcasts a program of that program type in the background, and, if found, receives a program when its
broadcast starts in place of the program now being received.
* This function can be used only when an RDS station that employs the EON data service is received. (When such a station is
received, “EON” lights up on the display.)
2
1 Make sure that “EON” is illuminated on the display.
* If “EON” is not illuminated on the display, receive an (or
another) RDS station so that “EON” lights up on the
display.
2 Select a desired program type, NEWS, INFO, AFFAIRS
or SPORT.
PS
RT CT
PTY
Press once or more.
The search is performed among all preset RDS stations
in the background. If a program is found, the program is
automatically received when its broadcast starts.
EON
NEWS INFO AFFAIRS SPORT
Lights up.
3 When the broadcast of the called program ends, the
previously received program (or another program on the
same station) is recalled.
PS
RT CT
PTY
To cancel this function
Press the EON button once or more, so that no program type
name lights up on the display.
M
EON
PS
RT CTPTY
EON
NEWS INFO AFFAIRS SPORT
Flashes.
26
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
1
3
2
30°
30°
English
Battery installation
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
●
Use only AA, R6, UM-3 batteries for replacement.
●
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
●
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
●
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
Remote control transmitter operation range
Remote control
sensor
Within approximately
6 m (19.7 feet)
Notes
●
There should be no large obstacles between the remote
control transmitter and the main unit.
●
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
27
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM CAUSE REMEDY
The unit fails to turn on when the POWER
switch is pressed.
No sound.
The sound suddenly goes off.
Only one side speaker outputs the sound.
AmplifierFMAMOthers
There is a lack of bass, and no ambience.
Sound “hums”.
Sound level is low.
The volume level is low while playing a
record.
The volume level cannot be increased, or
sound is distorted.
FM stereo reception is noisy.
There is distortion and clear reception
cannot be obtained even with a good FM
antenna.
A desired station cannot be tuned in with
the automatic tuning method.
Previously preset stations can no longer
be tuned in.
A desired station cannot be tuned in with
the automatic tuning method.
There are continuous crackling and
hissing noises.
There are buzzing and whining noises
(especially in the evening).
The remote control transmitter does not
work.
transmitter
Remote control
The sound is degraded when listening
with the headphones connected to the
compact disc player or cassette deck that
are connected with this unit.
Power cord is not plugged in or is not
completely inserted.
Incorrect output cord connections.
Appropriate input selector button is not
pressed.
The SPEAKERS switches are not set properly.
Speaker connections are not secure.
The protection circuit has been activated
because of short circuit etc.
The SLEEP timer functioned.
Incorrect setting of the BALANCE control.
Incorrect cord connections.
The + and – wires are connected in reverse at
this unit or speakers.
Incorrect cord connections.
No connection from the turntable to the GND
terminal.
The LOUDNESS control is functioning.
The record is being played on a turntable with
an MC cartridge.
The power to the component connected to the
REC OUT terminals of this unit is off.
Because of the characteristics of FM stereo
broadcasts, this is limited to cases where the
transmitter is too far away or the antenna input
is poor.
There is multipath interference.
The station is too weak.
The tuner has been unplugged for a long
period.
Weak signal or loose antenna connections.
Noises will result from ligtning, fluorescent
lamps, motors, thermostats and other electrical
equipment.
A television set is being used nearby.
Direct sunlight or lighting (of an inverter type of
flourescent lamp etc.) is striking the remote
control sensor of the main unit.
The batteries of this remote control transmitter
are too weak.
The power to this unit is off.
Firmly plug in the power cord.
Connect the cords properly. If the problem
persists, the cords may be defective.
Press the appropriate input selector button
corresponding to the input source.
Set the SPEAKERS switch that corresponds to
the speakers to be used to the ON position.
Secure the connections.
Turning the unit off and then on will reset the
protection circuit.
Cancel the SLEEP timer function.
Adjust it to the appropriate position.
Connect the cords properly. If the problem
persists, the cords may be defective.
Connect the speaker wires in the correct
phase (+ and –).
Firmly connect the audio plugs. If the problem
persists, the cords may be defective.
Make the GND connection between the
turntable and this unit.
Set the LOUDNESS control to the FLAT
position.
The player should be connected to the unit
through an MC head amplifier (available
separately).
Turn the power to the component on.
Check the antenna connections.
Try using a high quality directional FM
antenna.
Set the TUNING MODE button to the manual
tuning mode.
Adjust antenna placement to eliminate
multipath interference.
Use the manual tuning method.
Use a high quality directional FM antenna.
Repeat the presetting procedure.
Tighten the AM loop antenna connections and
rotate it for best reception.
Use the manual tuning method.
Use an outdoor antenna and a ground wire.
This will help somewhat but it is difficult to
eliminate all noise.
Relocate this unit away from the TV.
Change the position of the main unit.
Replace the batteries with new ones.
Turn the power to this unit on.
28
SPECIFICATIONS
English
AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.04% THD
<RX-495RDS> ...........................................70W+70W
<RX-395, RX-395RDS>.............................45W+45W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)
<RX-495RDS>
8/6/4/2 ohms..................................100/120/145/170W
<RX-395, RX-395RDS>
8/6/4/2 ohms..........................................68/75/85/95W
DIN Standard Output Power per Channel
4 ohms, 1 kHz, 0.7% THD
[Europe model only]
<RX-495RDS>...................................................100W
<RX-395, RX-395RDS>.......................................55W
IEC Power
8 ohms, 1 kHz, 0.04% THD
[Europe model only]
<RX-495RDS>.....................................................80W
<RX-395, RX-395RDS>.......................................50W
Headphone Jack Rated Output/Impedance
Output Level (8 ohms, 0.04% THD)
<RX-495RDS>.....................................................0.48V
<RX-395, RX-395RDS>.......................................0.45V
Impedance
<RX-495RDS>...............................................390 ohms
<RX-395, RX-395RDS>................................330 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TAPE/AUX
RIAA Equalization Deviation
PHONO MM.....................................................0±0.5 dB
Total Harmonic Distortion
PHONO MM to REC OUT
20 Hz to 20 kHz, 1V...........................................0.02%
CD/TAPE/AUX
20 Hz to 20 kHz, 35W/8 ohms...........................0.02%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM to REC OUT
(5 mV Input Shorted) ............................................82 dB
CD/TAPE/AUX
.................................................0±0.5 dB
to SP OUT
to SP OUT (Input Shorted).........108 dB
Power Band Width
<RX-495RDS>
8 ohms, 35W, 0.08% THD....................10 Hz to 50 kHz
<RX-395, RX-395RDS>
8 ohms, 22.5W, 0.08% THD.................10 Hz to 50 kHz
Damping Factor
8 ohms, 20 Hz to 20 kHz ............................100 or more
Input Sensitivity/Impedance
PHONO MM......................................2.5 mV/47 k-ohms
CD/TAPE/AUX
Maximum Input Signal (1 kHz, 0.04% THD)
PHONO MM.........................................................90 mV
Output Level
REC OUT...........................................................150 mV
..................................150 mV/47 k-ohms
Residual Noise (IHF-A Network)...........................100 µV
Channel Separation (Vol. –30 dB, EFFECT OFF)
CD/TAPE/AUX
(Input 5.1 k-ohms Terminated, 1 kHz)................60 dB
Tone Control Characteristics
BASS: Boost/cut ....................................±10 dB (50 Hz)
Turnover Frequency .............................(350 Hz)
TREBLE: Boost/cut..............................±10 dB (20 kHz)
Turnover Frequency........................(3.5 kHz)
Continuous Loudness Control...................– 30 dB (1 kHz)
(Level related equalization)
29
FM SECTION
Tuning Range .....................................87.5 to 108.0 MHz
Usable Sensitivity (75 ohms)
DIN, Mono (S/N 26 dB) .......................................0.9 µV
DIN, Stereo (S/N 46 dB) ......................................24 µV
AUDIO SECTION
Output Level/Impedance
FM (1 kHz, 40 kHz Dev.)
........................................................500 mV/2.2 k-ohms
AM (30% mod., 1 kHz)
........................................................150 mV/2.2 k-ohms
Image Response Ratio ...........................................80 dB
IF Response Ratio..................................................80 dB
Spurious Response Ratio.......................................70 dB
AM Suppression Ratio............................................55 dB
Capture Ratio.........................................................1.5 dB
Selectivity (two signals, ±300 kHz, 40 kHz Dev.)
................................................................................70 dB
Signal-to-Noise Ratio
(DIN-Weighted, 40 kHz Dev.) Mono/Stereo
...................................................................75 dB/70 dB
Harmonic Distortion
Mono/Stereo (1kHz, 40 kHz Dev.)
......................................................................0.1%/0.2%
Stereo Separation
(1 kHz, 40 kHz Dev.).............................................50 dB
Frequency Response
20 Hz to 15 kHz..............................................0 ±1.5 dB
AM SECTION
Tuning Range .......................................531 to 1,611 kHz
GENERAL
Power Supply .........................................AC 230V, 50 Hz
Power Consumption
<RX-495RDS>...................................................120W
<RX-395, RX-395RDS>.....................................145W
AC Outlets
2 SWITCHED OUTLETS
[Europe model]...................................100W max. total
1 SWITCHED OUTLET
[U.K. model] .......................................100W max. total
Dimensions (W x H x D) ...............435 x 146 x 308.5 mm
Weight
<RX-495RDS>.....................................................7.8 kg
<RX-395, RX-395RDS>......................................6.5 kg
Accessories...........................................AM loop antenna
Indoor FM antenna
Remote control transmitter
Batteries
Specifications are subject to change without notice.
Usable Sensitivity .............................................100 µV/m
Selectivity................................................................32 dB
Signal-to-Noise Ratio..............................................50 dB
Image Response Ratio ...........................................40 dB
Spurious Response Ratio.......................................50 dB
Harmonic Distortion (1 kHz).....................................0.3%
30
FM GEDEELTE
Afstembereik......................................87,5 tot 108,0 MHz
Effectieve Gevoeligheid (75 ohm)
DIN, Mono (Signaal/Ruis 26 dB) .........................0,9 µV
DIN, Stereo (Signaal/Ruis 46 dB) ........................24 µV
Spiegelfrekwentie Verhouding ...............................80 dB
IF Frekwentiebereik Verhouding.............................80 dB
Parasitaire Frekwentieverhouding ..........................70 dB
AM Ruisonderdrukkingsverhouding........................55 dB
Opvangfrekwentieverhouding................................1,5 dB
Selectiviteit (twee signalen, ±300 kHz, 40 kHz Afw.)
................................................................................70 dB
AUDIO GEDEELTE
Uitgangsniveau/Impedantie
FM (1 kHz, 40 kHz Afw.)...................500 mV/2,2 k-ohm
AM (30% mod., 1 kHz)......................150 mV/2,2 k-ohm
ALGEMEEN
Spanningsvereisten................230V, 50 Hz wisselstroom
Stroomverbruik
<RX-495RDS>.....................................................120W
<RX-395, RX-395RDS>.......................................145W
Netspanningsuitgangen (AC OUTLETS)
2 GESCHAKELDE NETSPANNINGSUITGANGEN
[Modellen voor Europa]
.......................................Max. totaal vermogen: 100W
1 GESCHAKELDE NETSPANNINGSUITGANG
[Modellen voor Groot-Brittannië]
.......................................Max. totaal vermogen: 100W
Signaal/Ruisverhouding
(DIN-norm, 40 kHz Afw.) Mono/Stereo.......75 dB/70 dB
Harmonische Vervorming
(1 kHz, 40 kHz Afw.) Mono/Stereo ...............0,1%/0,2%
Stereo Scheiding (1 kHz, 40 kHz Afw.)...................50 dB
Frekwentiebereik
20 Hz tot 15 kHz..............................................0±1,5 dB
AM GEDEELTE
Afstembereik........................................531 tot 1.611 kHz
Effectieve Gevoeligheid....................................100 µV/m
Selectivitei...............................................................32 dB
Signaal/Ruisverhouding..........................................50 dB
Spiegelfrekwentie Verhouding................................40 dB
Afmetingen (L x H x B) .................435 x 146 x 308,5 mm
Gewicht
<RX-495RDS>.....................................................7,8 kg
<RX-395, RX-395RDS>......................................6,5 kg
Toebehoren.............................................AM Lusantenne
FM Binnenantenne
Afstandbediening
Batterijen
Alle specificaties zijn onder voorbehoud en kunnen
zondere nadere kennisgeving worden gewijzigd.
Parasitaire Frekwentieverhouding ......................... 50 dB
Harmonische Vervorming (1 kHz)............................0,3%
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VU27700
documentation manual, user maintenance, brochure, user reference, pdf manual
This file has been downloaded from:
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,
manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,
Loading...