Yamaha Audio PMT-H15, PMT-L11 User Manual

Digital Cinema Projector Ceiling Bracket
PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings)
Installation Manual
Be sure to read this manual thoroughly before using this bracket. After you have read this manual, retain it for future reference.
When installing the projector using this bracket, all installation work must be performed by a qualified contractor or dealer personnel. The customer must never attempt to perform this installation work.
Packing List .................................................................................................................................. 4
Names of Parts ............................................................................................................................. 5
Dimensions of Parts .................................................................................................................... 7
Guidelines for the Projector Installation Position and Screen Size ........................................ 8
Installation Examples ................................................................................................................ 10
Installing the Projector .............................................................................................................. 11
Adjusting the Projection Angle................................................................................................. 14
Specifications ............................................................................................................................. 16
Contents
(PMT-L11)
(PMT-H15)
English
Français
Deutsch
Svenska
Italiano
Español
Nederlands
E-2
Safety Instruction
1. Always follow the instructions set forth in this manual when installing the projector using this bracket.
Improper or inadequate installation could cause the projector to fall and injure someone.
2. The installation must be secure enough to bear the weight of the projector, the ceiling bracket, and other hardware indefinitely, and must also be secure enough to withstand vibration.
Inadequate installation could cause the projector to fall and injure someone.
3. To ensure safety, all bolts and screws must be tightened securely.
Loose bolts or screws could cause the projector to fall and injure someone.
4. Use only the parts provided with the bracket, and any other parts (commrecially available) that are specified in this manual.
Using other parts could cause the projector to fall and injure someone.
5. Do not modify the bracket or the parts provided with the bracket.
Modifying the bracket or the other parts could cause the projector to fall and injure someone.
6. Do not use damaged parts.
Using damaged parts could cause the projector to fall and injure someone. If any parts become damaged, contact your dealer.
7. Make sure to leave enough open space around the unit to allow heat generated by the projector to dissipate.
Failure to provide adequate space around the unit could cause the projector to overheat internally, causing a fire.
8. Before replacing the lamp cartridge, always remove the projector (with the mounting adapter attached) from the ceiling bracket.
Attempting to replace the lamp cartridge while the projector is attached to the ceiling bracket could cause the projector or the ceiling bracket to fall and injure someone.
E-3
English
Français
Deutsch
Svenska
Italiano
Español
Nederlands
9. Never hang from the projector or the ceiling bracket.
Hanging from the projector or the ceiling bracket could cause the projector or the ceiling bracket to fall and injure someone.
10. Do not install the projector in a location near an air conditioning vent or in a location subject to vibration.
Such conditions could have an adverse effect on the projector, and could even cause a fire or electric shock.
11. Do not install the projector in a location that is subject to high levels of dust or humidity.
Dust accumulating inside the projector could cause a short circuit that in turn could cause a fire or electric shock.
12. Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to extreme fluctuations in temperature (such as near an air conditioner).
Such conditions can cause the projector housing to warp or to become discolored.
13. Do not wipe the exterior of the ceiling bracket with benzene, paint thinner or cleaning compounds.
Doing so could damage the finish.
14. Special techniques and experience are essential when installing the projector using this bracket. Request that your dealer arrange to have the equipment installed. The customer should never attempt to suspend the projector from the ceiling.
Improper installation could cause the ceiling bracket or the projector to fall and injure someone.
15. Once the projector is installed, safety checks should be conducted on a regular basis.
If the projector is used over an extended period of time, screws can become loose and the installation can become weaker due to the passage of time, vibration, etc.
E-4

Packing List

Confirm that all of the parts are present.
PMT-L11
Ceiling bracket x 1
PMT-H15
Ceiling bracket x 1
Common Components (The following parts are provided with each bracket.)
Projector mounting adapter x 1
Projector mounting screws (M6, pan head) x 4
Adjustment pole locking screws (M5) x 4
Safety brackets x 2
Safety wires x 2
Vertical angle adjustment screws (M6, hexagonal head) x 4
Safety bracket mounting screws (M4, pan head) x 4
Safety wire mounting screws (M4, pan head) x 4
E-5
English
Français
Deutsch
Svenska
Italiano
Español
Nederlands

Names of Parts

PMT-L11
Ceiling bracket
Projector mounting adapter
Tilt angle adjustment screws (There are also screws on the opposite side.)
Vertical angle adjustment screws (There are also screws on the opposite side.)
Horizontal angle adjustment screws
Mounting guide pin
E-6
PMT-H15
Height locking screw
Ceiling bracket
Projector mounting adapter
Tilt angle adjustment screws (There are also screws on the opposite side.)
Vertical angle adjustment screws (There are also screws on the opposite side.)
Horizontal angle adjustment screw (four in total)
Height adjustment pole
Mounting guide pin
Loading...
+ 11 hidden pages