Yamaha Audio MOTIF8, MOTIF7, MOTIF6 User Manual

TOOLS for MOTIF6/MOTIF7/MOTIF8

Installation Guide/Installationshandbuch/Manuel d’installation

SPECIAL NOTICES

• The software and this Installation Guide are exclusive copyrights of Yamaha Corporation.

• Use of the software and this guide is governed by the SOFTWARE LICENSING AGREEMENT which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read carefully the AGREEMENT at the end of this guide before installing the application.)

• Copying of the software or reproduction of this guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this guide and the software.

• Copying of the commercially available music data is strictly prohibited except for your personal use.

• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.

• Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced separately.

BESONDERE HINWEISE

• Dieses Programm und diese Installationsanleitung sind im Sinne des Urheberrechts alleiniges Eigentum der Yamaha Corporation.

• Die Benutzung des Programms und dieser Anleitung unterliegt der SOFTWARE-LIZENZVEREINBARUNG, mit der sich der Erwerber durch Öffnen des Siegels der Programmverpackung uneingeschränkt einverstanden erklärt. (Bitte lesen Sie die VEREINBARUNG am Ende dieser Anleitung vor Installation der Anwendung sorgfältig durch.)

• Das Kopieren der Software und die Reproduktion dieser Anleitung, in welcher Form auch immer, in Teilen oder als Ganzes, sind nur mit schriftlicher Genehmigung des Herstellers erlaubt und sonst ausdrücklich verboten.

•Yamaha leistet keinerlei Garantie hinsichtlich der Benutzung des Programms und der zugehörigen Dokumentation und übernimmt keine Ve rantwortung für die Ergebnisse der Benutzung dieser Anleitung oder des Programms.

• Das Kopieren im Handel erhältlicher Musikdaten ist nur für Ihren Privatgebrauch zulässig und sonst streng untersagt.

• Die in dieser Installationsanleitung erwähnten Firmen- und Produktnamen sind Warenzeichen bzw. eingetragene Warenzeichen der betreffenden Firmen.

• Zukünftige Aktualisierungen von Anwendungs- und Systemsoftware sowie jede Änderung der technischen Daten und Funktionen werden separat bekanntgegeben.

EnglishDeutschFrançais

REMARQUES PARTICULIERES

• Les droits d’auteurs (copyright) de ce logiciel et de ce manuel d’installation appartiennent exclusivement à Yamaha Corporation.

•L’usage de ce logiciel et de ce manuel est déﬁni par l’accord de licence auquel l’acheteur déclare souscrire sans réserve lorsqu’il ouvre le sceau de l’emballage du logiciel. (Veuillez donc lire attentivement l’accord de licence du logiciel situé à la ﬁn de ce manuel avant d’installer le logiciel.)

•Toute copie du logiciel et toute reproduction totale ou partielle de ce manuel, par quel moyen que ce soit, est expressément interdite sans l’autorisation écrite du fabricant.

•Yamaha n’offre aucune garantie en ce qui concerne l’utilisation du logiciel et de la documentation. Yamaha ne peut en aucun cas être tenu responsable des dommages éventuels résultant de l’utilisation de ce manuel et de ce logiciel.

•Toute copie de données musicales commercialisées est formellement interdite, sauf pour usage personnel.

• Les noms des ﬁrmes et des produits apparaissant dans ce manuel d’installation sont des marques commerciales ou des marques déposées appartenant à leurs détenteurs respectifs.

• Les remises à jour du programme et du système ainsi que toute modiﬁcation des caractéristiques et fonctions seront annoncées séparément.

1

English

Important Notices about the CD-ROM

Data Types

This CD-ROM includes two types of data: application software and sampled audio data. Please refer to pages 4 (Windows) and 9 (Macintosh) for software installation instructions, and page 14 for the audio contents. These applications allow you to edit MOTIF data and transfer data between your computer and the MOTIF. You can import the audio data from an audio CD player (or any CD playing/ripping function on your computer) to the MOTIF via its INPUT jacks. For detailed information, refer to the MOTIF Owner’s manual. The application software is contained on track 1 (as recognized on an audio CD player), and the sampled audio data is contained in the subsequent tracks.

Never attempt to play back track 1 (containing the application software) on an audio CD player. Doing so may result in damage to your hearing as well as to your CD player/audio speakers.

Operating System (OS)

The applications in this CD-ROM are provided in versions for both Windows and Macintosh operating systems. The installation procedure and the applications themselves differ depending on the operating system that you are using. Please refer to the appropriate installation instructions.

→ Windows Read page 4. → Macintosh Read page 9.

Media format

The MOTIF6/MOTIF7/MOTIF8 and the File Utility software are compatible with the following format media.

• MS-DOS • CD-ROM with ISO9660

nThe MOTIF and File Utility cannot copy contents of CD-ROM supplied with Yamaha A5000/4000/3000.

nI

f a read-only ﬁle is copied to the Memory card in the MOTIF’s card slot or the SCSI device connected to the MOTIF, the ﬁle cannot be deleted from the MOTIF.

nThe MOTIF cannot directly read the contents of the included CD-ROM. The CD-ROM is intended for use only with a computer.

For Windows Users

Contents of the CD-ROM

The CD-ROM contains a variety of applications (with installers) and data in the following folders.

Folder Name Application Name Contents

Acroread_ Acrobat Reader* PDF (Portable Document Format) viewer. Enables you to view each PDF manual for the

Tools VEMOT_ Voice Editor for MOTIF6/MOTIF7/MOTIF8 Enables you to edit the MOTIF voices on your computer.

FU_ File Utility Enables you to manage ﬁles in the Memory card in the card slot on the MOTIF or in the SCSI

TWE YAMAHA Wave Editor TWE V2.3 Enables you to edit the audio (wave) data on your computer and transfer it between the computer

USBdrv_ YAMAHA USB MIDI Drivesr (for Win 98, Me) Enables your computer to communicate with the MOTIF when your computer and the MOTIF

USBdrv2k_ YAMAHA USB MIDI Driver

Seq_Demo Cubase VST/32 Demo Version* Demo version of the sequence software Cubase VST/32.

* Unfortunately, Yamaha makes no guarantee concerning the stability of these programs (marked with *) nor can it offer user support for them.

• All the applications listed above are supplied with online/PDF manuals.All the applications listed above are supplied with online/PDF manuals.

•You can start the Voice Editor for MOTIF6/MOTIF7/MOTIF8 or File Utility software as either a stand-alone software or a plug-in application in the Open Plug-in Technology compatible application. Refer to the owner’s manual of the client application (sequencer, etc.) for details on using the Voice Editor for MOTIF6/MOTIF7/MOTIF8 or File Utility as a plug-in software.

(for Win 2000, XP)

applications.

device connected to the MOTIF.

and the MOTIF.

are connected using a USB cable.

Enables your computer to communicate with the MOTIF when your computer and the MOTIF are connected using a USB cable.

Folder Name File Name Contents

Remote Cubase Setup ﬁle for Cubase Contains settings for controlling Cubase on your computer from the MOTIF.

Logic Setup ﬁle for Logic Contains settings for controlling Logic on your computer from the MOTIF.

Sonar Setup ﬁle for SONAR/Cakewalk ProAudio Contains settings for controlling SONAR and Cakewalk on your computer from the MOTIF.

Voice List Normal Voice List Normal Voice List for the MOTIF

Drum Voice List Drum Voice List for the MOTIF

Performance List Performance List for the MOTIF

2

Using an Audio CD Player

Track 1: Applications mentioned above; NEVER attempt to play back this track.

Never attempt to play back track 1 (containing the application software) o n an audio CD player. Doing so may result in damage to your hearing as well as to your CD player/audio speakers.

Track 2 - 40: Sampled audio data; prepared for recording on the MOTIF6/MOTIF7/MOTIF8.

About Open Plug-in Technology

You can start the Voice Editor for MOTIF or the File Utility software as either a stand-alone software or a plug-in application in the Open Plug-in Technology compatible application. Open Plug-in Technology (OPT) is a newly developed software format that allows control over MIDI devices from a music software sequencer. For example, this allows you to start up and operate various parts of your music system, such as plug-in board editors, and mixing control editors – directly from an OPT-compatible sequencer, without having to use each separately. This also makes it unnecessary to set MIDI drivers for each application, streamlining your music production system and making all operations more convenient and seamless.

About the OPT Le

The client application and its compatibility with OPT can be divided into three levels, as shown below.

vels

Level 1 – OPT Panels provides basic support for opening and displaying OPT control panels that can transmit data via the clients’ external MIDI ports.

Typically this will allow basic hardware editor control panels to operate properly.

Level 2 –

OPT Processors provides support for real-time MIDI processors and panel automation. Typically this will allow both real-time and ofﬂine MIDI

effects (e.g. Arpeggiators, transposers etc.) to operate properly and supply automation to OPT panels.

Level 3 – OPT Views provides support for edit views and MIDI processors/panels that require direct access to client sequencer storage structures. Typically

this will allow sophisticated MIDI edit views to be supported (e.g. List editors, Auto Accompaniment, Data Checkers etc.).

OPT Level Implementation for the Voice Editor

This chart shows the OPT-compatibility of the Voice Editor for MOTIF.

OPT levels of the client application

VIEWS (Level3) Yes None

PROCESSORS (Level2) Yes None

Operation support Operation limits

Voice Editor for MOTIF operation

English

PANELS (Level1) Yes (with limitations) Bulk reception

n

Certain operations may not work as expected if there is no corresponding function in the client application (sequencer, etc.). The highest level of implementation for the client application is indicated in the OPT logo (which appears along with the version information in the application).

OPT Level Implementation for the File Utility

This chart shows the OPT-compatibility of the File Utility.

OPT levels of the client application

VIEWS (Level3) Yes None

PROCESSORS (Level2) Yes None

PANELS (Level1) No —

n

Certain operations may not work as expected if there is no corresponding function in the client application (sequencer, etc.). The highest level of implementation for the client application is indicated in the OPT logo (which appears along with the version information in the application).

Operation support Operation limits

File Utility operation

3

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

Minimum System Requirements

The system requirements below may differ slightly depending on the particular operating system.

Voice Editor for MOTIF6/MOTIF7/MOTIF8

•

File Utility

English

• TWE V2.3

USB MIDI Driver

For details about the application software contained in the “Seq_Demo” folder, refer to the owner’s manual of each software.

Software Installation

n

OS: Windows 95/98/Me/NT4.0/2000/

Computer: 166 MHz or higher;

Available Memory: 32 MB or more Hard Disk: 12 MB or more Display: 640 x 480, High Color (16 bit)

OS: Windows 98/Me/2000/XP Home Edition/

Computer: 166 MHz or higher;

Available Memory: 32 MB or more Hard Disk: 6 MB or more Display: 640 x 480, High Color (16 bit)

OS: Windows 95/98/Me Computer: 166 MHz or higher;

Available Memory: 24 MB or more Hard Disk: Average access time 30 ms or less Display: 800 x 600, 256 colors or more

OS: Windows 98/Me/2000/XP Home Edition/

Computer: 166 MHz or higher;

Available Memory: 32 MB or more

Hard Disk: 2 MB or more

XP Home Edition/XP Professional

Intel Pentium/Celeron processor

XP Professional

Intel Pentium/Celeron processor

XP Professional

Intel Pentium/Celeron processor

(64 MB or more is recommended)

Uninstall (Removing the installed applictaion)

You can remove the installed applictaion software. Select [START] → [Settings] → [Control Panel] → [Add/Remove Programs] → [Install/Uninstall], then select the application to be removed and click [Add/Remove...]. Follow the on-screen instructions to uninstall the application.

The button names or menus may differ depending on the computer OS.

USB MIDI Driver

To operate the MOTIF from your computer via USB, you’ll need to install the appropriate driver software. The USB-MIDI driver is software that transfers MIDI data back and forth between sequence software and the MOTIF via a USB cable.

Computer

Sequence

Software

Driver

USB cable

→Windows 98/Me users See below. →Windows 2000 users See page 5. →Windows XP users See page 6.

● Installing the driver on a Windows 98/Me

system

1 Start the computer.

2 Insert the included CD-ROM into the CD-ROM drive.

3 Make sure the POWER switch on the MOTIF is set to OFF and use the USB

cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the MOTIF. When the MOTIF is turned on, the computer automatically displays the “Add New Hardware Wizard.” If the Add New Hardware Wizard does not appear, click “Add New Hardware” in the Control Panel.

nFor Windows Me users, check the radio button to the left of “Automatic search for a

better driver (Recommended)” and click [Next]. The system automatically starts searching and installing the driver. Proceed to Step 8. If the system does not detect the driver, select “Specify the location of the driver (Advanced)” and specify the CD-ROM drive’s “USBdrv_” folder to install the driver.

Windows 98

MOTIF

2

1

Acrobat Reader

In order to view the electronic (PDF) manuals included with each application, you’ll need to install Acrobat Reader.

n

If an older version of Acrobat Reader is installed on your PC, you’ll need to uninstall it before proceeding.

1 Double-click on the “Acroread_” folder.

Four different language folders will be displayed.

2 Select the language you want to use and double-click on its folder.

The ﬁle “ar***.exe” ﬁle will be displayed. (“***” indicates the selected language.)

3 Double-click on “ar***.exe.”

Acrobat Reader Setup Dialog box will be displayed.

4

Execute the installation by following the on-screen directions.

After installation is complete, the Acrobat folder appears on your PC (in Program Files, as the default). For information on using the Acrobat Reader, refer to the Reader Guide in the Help menu.

Windows Me

4

4 Click [Next].

The window below enables you to select the search method.

5 Check the radio button to the left of “Search for the best driver for your

device. (Recommended).” Click [Next]. The window below enables you to select a location in which to install the driver.

8 When the installation is complete, the following screen appears. Click

[Finish].

nSome computers may take about ten seconds to show this screen after the installation

is complete.

Windows 98

Windows Me

English

6 Check the “CD-ROM drive” box and uncheck all other items. Click [Next].

nThe system may ask you to insert a Windows CD-ROM while it checks for the driver.

Specify the USBdrv_ directory of the CD-ROM drive (such as D:\USBdrv_\) and continue the installation.

nWhen using the Windows 98, specify the USBdrv_ directory of the CD-ROM drive

(such as D:\USBdrv_\) and continue the installation.

7 When the system detects the driver on the CD-ROM and is ready for

installation, it displays the following screen. Make sure that the “YAMAHA USB MIDI Driver” is listed, and click [Next]. The system starts the installation.

The driver has been installed.

● Installing the driver on a Windows 2000

system

1 Start the computer and use the “Administrator” account to log into

Windows 2000.

File Signature Veriﬁcation], and check the radio button to the left of “Ignore

-Install all ﬁles, regardless of ﬁle signature” and click [OK].

3 Insert the included CD-ROM into the CD-ROM drive.

4 Make sure the POWER switch on the MOTIF is set to OFF and use the USB

cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the MOTIF. When the MOTIF is turned on, the computer automatically displays the “Found New Hardware Wizard.” Click [Next].

5 Check the radio button to the left of “Search for a suitable driver for my

device. (Recommended).” Click [Next]. The window that appears enables you to select a location in which to install the driver.

6 Check the “CD-ROM drives” box and uncheck all other items. Click [Next].

The system may ask you to insert a Windows CD-ROM while it checks for the driver.

n

Specify the “USBdrv2k_” directory of the CD-ROM drive (such as D:\USBdrv2k_\) and continue the installation.

7 When the installation is complete, the system displays “Completing the

Found New Hardware Wizard.” Click [Finish].

nSome computers may take about ten seconds to show this screen after the installation

is complete.

8 Restart the computer.

The driver has been installed.

5

● Installing the driver on a Windows XP system

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

1 Start the computer. 2 Select [Start] → [Control Panel].

If the control panel appears as shown below, click “Switch to Classic View” in the upper left of the window. All control panels and icons will be displayed.

TWE

With the TWE audio editing software, you can edit wave data directly on your computer.

1 Double-click on the “TWE” folder.

Four different language folders will be displayed.

2 Select the language that you want to use and double-click on its folder.

The “YAMAHA TWE” folder will be displayed.

3 Copy the “YAMAHA TWE” folder onto the desktop of your computer.

For details on operation, refer to the PDF manual provided in the folder.

English

3 Go to [System] → [Hardware] → [Driver Signing] → [File Signature

Veriﬁcation], and check the radio button to the left of “Ignore -Install all ﬁles, regardless of ﬁle signature” and click [OK].

4 Click the [OK] button to close System Properties, and then click “X” in the

upper right of the window to close the Control Panel.

5 Insert the included CD-ROM into the CD-ROM drive.

6 Make sure the POWER switch on the MOTIF is set to OFF and use the USB

cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the MOTIF. When the MOTIF is turned on, the computer automatically displays the “Found New Hardware Wizard.”

7 Check the radio button to the left of “Search for a suitable driver for my

device. (Recommended).” Click [Next]. The system starts the installation.

8 When the installation is complete, the system displays “Completing the

Found New Hardware Wizard.” Click [Finish].

n

9 Restart the computer.

The driver has been installed.

Voice Editor, File Utility

Once you‘ve installed these software programs, you can use your computer to edit the voices of the MOTIF as well as access and organize data stored to media connected to the MOTIF (Memory card and SCSI devices).

Some computers may take about ten seconds to show this screen after the installation is complete.

Setup Files for remote control of sequencing software

To use these ﬁles, the appropriate sequencing software should be installed to your computer.

● Setup Files for Cubase

1 Start Cubase.

2 Select Option from the menu bar and select Setup in Remote Setup.

3 Set the value in the VST Remote window called up via step #2 as illustrated

below, and click the [OK] button.

Remote: Generic Remote Input: YAMAHA USB IN 0-3 Output: YAMAHA USB OUT 0-3

nIf the MOTIF is connected to the computer via MIDI, set the port to 1.

4 Click the [EDIT] button in the Generic Remote window called up via

step#3.

5 Click the [Import] button in the Generic Remote Setup called up via step#4.

6 Select the Setup ﬁle for remote control of Cubase (Yamaha MOTIF

Remote.xml) in the dialog opened via step #5 and click the [Open] button.

1

Double-click on the “Tools” folder in the CD-ROM. The “VEMOT_” folder, “FU_” folder and “TWE” folder will be displayed.

2 Double-click on the “VEMOT_” folder or “FU_” folder.

“setup.exe” ﬁle will be displayed.

3 Double-click on the “setup.exe” ﬁle.

The Voice Editor or the File Utility Tools setup dialog will be displayed.

4

Execute the installation by following the on-screen directions.

nWhen installing the above software, make sure to install the MIDI Setup program ﬁrst.

For details, refer to the each on-line Help or the each PDF owner’s manual.

7 Close the Generic Remote Setup window.

6

● Preference File for Logic

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

■ When you change the track structure from the template setting...

1 Start Logic.

2 Select Key Commands... in Settings from the Option menu.

3 Select Import Key Commands... from the Option menu in the “Key

Commands” window called up via step #2.

4 In the dialog window called up via step #3, select a preference ﬁle for Logic

named “Logic32.prf” in the included CD-ROM and click [Open]. After importing the ﬁle, the following setup appears.

Please note that the Key Command settings are replaced with the selected preference ﬁle.

● Template for SONAR/SONAR2/Cakewalk

ProAudio (Installation)

1 Copy the template ﬁle from the CD-ROM to the folder where the SONAR/

SONAR2/Cakewalk ProAudio are installed.

2 Start SONAR/SONAR2/Cakewalk ProAudio.

3 Select Option from the menu bar and select Audio. The “Direct” Show

Audio (Cakewalk Direct Show Audio)” dialog will be displayed.

4 Set the text box Number of Aux Busses to 3 (default setting is 2.) and click

[OK].

The setup for loading a template has been installed.

● Template for SONAR/SONAR2/Cakewalk

ProAudio (Importing)

1 Start SONAR/SONAR2/Cakewalk ProAudio.

1 Click the [CONFIG] button in the Panel window (above).

2 Set the ﬁrst track number of the MIDI tracks by using the [SET MIDI First

Track] knob.

• When this template is used, the MIDI tracks should be arranged in numerical order. Otherwise, you cannot control Cakewalk ProAudio from the MOTIF.

• If you set the ﬁrst track number to an unused track number, the knobs, buttons, and sliders on the window may be grayed out. In this case, set the ﬁrst track number to the ﬁrst available track containing data.

Pro Tools

The special setup ﬁle is not necessary for using Pro Tools. You can control Pro Tools from the MOTIF by changing settings on the Pro Tools. The method for setting up is the same as on the Macintosh. See page 11.

Cubase VST/32 Demo version

1 Double-click on the “Seq_Demo” folder.

The “Cubase” folder will be displayed.

2 Double-click on the “Cubase” folder.

The “Cubase_VST/32_Demo_50.exe” ﬁle will be displayed.

3 Double-click on the “Cubase_VST/32_Demo_50.exe” ﬁle.

4 Execute the installation by following the on-screen directions.

MIDI port setting (when starting the software as a stand-alone application)

Before setting the MIDI port on the Voice Editor or File Utility, you should set the MIDI port from the MIDI SETUP toolbar.

nWhen you start the Voice Editor or File Utility as a plug-in application in the Open Plug-in

Technology compatible application, refer to the the PDF manual for the respective software.

1 Start the Voice Editor or File Utility.

2

Click the MIDI Setup button in the Toolbar called up via step #1.

English

2 Select “Open (SONAR)/New (Cakewalk)” from the File menu.

The Open/New Project File dialog will be displayed.

3 Select the “Cakewalk Template” from the “Files of type” menu (when you

are using the SONAR), then select “Yamaha MOTIF Synthesizer” from the dialog list and click [OK]. The template will be imported and the three windows (Track window, Control window, and Panel window) will be displayed.

The setup has been completed and you can control SONAR/SONAR2/ Cakewalk ProAudio from the MOTIF.

nSelect “MIDI Devices...” from the Option menu to open the MIDI Ports window. From

this window, set Input Ports to “YAMAHA USB IN 0-3.” If the MOTIF is connected to the computer via MIDI, set Input Ports to 1 (for example, “IN 0-1”).

MIDI Setup button

3 In the MIDI Setup window called up via step#2, click the [▼] button at the

right end of each box and make the port settings as shown.

nIn order for MIDI ports to be available here, you’ll need to select the relevant MIDI

port within each application software (Voice Editor or File Utility). This is the port that you’ll use in the various software. For details on setting the MIDI port, refer to the on-line manual of each software.

7

For Macintosh Users

Contents of the CD-ROM

The CD-ROM includes two folders: “International” and “Japanese.” Double-click on the “International” folder to open it. A variety of applications (with installers) and data are contained in the following folders.

Folder Name Application Name Contents

ACRO BATAcrobat Reader* PDF (Portable Document Format) viewer. Enables you to view each PDF manual for

OMS Open Music System (OMS)* Enables you to use several MIDI applications on the Mac OS.

English

USBdrv_ YAMAHA USB MIDI Driver Enables your computer to communicate with the MOTIF when your computer and the

Tools Voice Editor for MOTIF6/MOTIF7/MOTIF8 Enables you to edit the MOTIF voices on your computer.

Seq_Demo Cubase VST 5.0 Demo Version*

* Unfortunately, Yamaha makes no guarantee concerning the stability of these programs (marked with *) nor can it offer user support for them.

• All the applications listed above are supplied with online/PDF manuals.

• OMS® and are trademarks of Opcode Systems, Inc.

the applications

OMS Setup for YAMAHA Contains the OMS Setup ﬁles for the Yamaha MOTIF.

MOTIF are connected using a USB cable.

File Utility Enables you to manage ﬁles in the Memory card in the card slot on the MOTIF or in the

YAMAHA Wave Editor TWE V2.3 Enables you to edit the audio (wave) data on your computer and transfer it between the

Logic Audio Platinum 4.6 Demo*

SCSI device connected to the MOTIF.

computer and the MOTIF.

Demo version of the sequence software Cubase VST 5.0. Demo version of the sequence software Logic Audio Platinum 4.6.

Folder Name File Name Contents

Remote Setup ﬁle for Cubase Contains settings for controlling Cubase on your computer from the MOTIF.

Setup ﬁle for Logic Contains settings for controlling Logic on your computer from the MOTIF.

Voice List Normal Voice List Normal Voice List for the MOTIF

Drum Voice List Drum Voice List for the MOTIF

Performance List Performance List for the MOTIF

Using an Audio CD Player

Track 1: Applications mentioned above; NEVER attempt to play back this track.

Never attempt to play back track 1 (containing the application software) on an audio CD player. Doing so may result in damage to your hearing as well as to your CD player/audio speakers.

Track 2 - 40: Sampled audio data; prepared for recording on the MOTIF6/MOTIF7/MOTIF8.

8

Minimum System Requirements

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

The system requirements below may differ slightly depending on the particular operating system.

• Voice Editor for MOTIF6/MOTIF7/MOTIF8

OS: Mac OS 8.6 through OS 9.22 (Mac OS X is not supported) Computer: A Macintosh computer with a PowerPC or later CPU Available Memory: 16 MB or more Hard Disk: 40 MB or more Display: 800 x 600, 32,000 colors or more

• File Utility OS: Mac OS 8.0 through OS 9.22 (Mac OS X is not supported) Computer: A Macintosh computer with a PowerPC or later CPU Available Memory: 6 MB or more Hard Disk: 4 MB or more (except for OMS) Display: 640 x 480, 256 colors or more Other: OMS 2.3.8 (included in the CD-ROM in the package)

• TWE V2.3 OS: Mac OS 7.6.1 through OS 9.22 (Mac OS X is not supported) Computer: A Macintosh computer with a PowerPC or later CPU Available Memory: 8 MB or more Hard Disk: Average access time 30 ms or less Display: 640 x 400, 256 colors or more

• USB MIDI Driver OS: Mac OS 8.5 through OS 9.22 (Mac OS X is not supported) Computer: A Macintosh computer with a USB connector and a PowerPC or later CPU Memory: 64 MB or more (128 MB or more is recommended)

nTurn off virtual memory.

English

Hard disk: 2 MB or more Other: OMS 2.3.8 (included in the CD-ROM in the package)

Software Installation

Acrobat Reader

In order to view the electronic (PDF) manuals included with each application, you’ll need to install Acrobat Reader.

Double-click on the “ACROBAT” folder.

1

Three different language folders will be displayed: English, German and French.

2 Select the language you want to use and double-click on its folder.

“Reader Installer” will be displayed. The Installer name may differ depending on the language you select.

3 Double-click on the “Reader Installer.”

Acrobat Reader Setup Dialog will be displayed.

4 Execute the installation by following the directions appearing on the screen.

After installation is complete, the Acrobat folder appears on your computer (in Hard Disk, as the default). For information on using the Acrobat Reader, refer to the Reader Guide in the Help menu.

Open Music System (OMS) 2.3.8

OMS allows you to use several MIDI applications on the Mac OS at the same time.

1 Double-click on the “OMS” folder (English version only).

“Install OMS 2.3.8” will be displayed.

2 Double-click on “Install OMS 2.3.8.”

OMS Setup Dialog will be displayed.

3 Execute the installation by following the on-screen directions.

After the installation, select “Restart.”

nAfter the installation is complete, you may possibly encounter an error message

warning that the installer did not close. In this case, go to the “File” menu and select “Quit” to close the installer. Then reboot the computer.

After restarting the Macintosh, you will ﬁnd the “Opcode”/“OMS Applications” folder on your computer (Hard Disk, as the default).

4 Copy the “OMS_2.3_Mac.pdf” in the CD-ROM to the “OMS Applications”

folder (drag-and-drop it to the folder). Refer to the “OMS_2.3_Mac.pdf” (English version only) how to use the application.

5 Copy the “OMS Setup for YAMAHA” in the CD-ROM to the “OMS

Applications” folder (drag-and-drop it to the folder). In the “OMS Setup for YAMAHA” folder you will ﬁnd the OMS Setup ﬁles for the Yamaha tone generators, which can be used as templates.

9

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

USB MIDI Driver

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

To operate the MOTIF from your computer via USB, you’ll need to install the appropriate driver software. The USB-MIDI driver is software that transfers MIDI data back and forth between sequence software and the MOTIF via a USB cable.

English

First install OMS before you install the USB-MIDI driver. Also, after installing the driver, you will need to set up OMS (above).

1 Start the computer.

2 Insert the included CD-ROM into the CD-ROM drive. The system displays

the CD-ROM icon on the desktop.

3 Double-click the CD-ROM icon and double-click the “Install USB Driver”

icon in the “USBdrv_” folder to display the following installation screen.

OMS

Computer

Sequence

Software

Driver

USB cable

MOTIF

OCTAVE

UP

DOWN

7 When the installation is complete, the system displays the following

message: “Installation was successful. You have installed software which requires you to restart your computer.” Click [Restart]. The computer automatically restarts. You can locate the installed ﬁles in the following locations:

• System Folder | Control Panels | YAMAHA USB MIDI Patch

• System Folder | Extensions | USB YAMAHA MIDI Driver

• System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver

PAN

CHORUS

REVERB

TEMPO

ATTACK RELEASECUTOFF

RESONANCE

KNOB

REMOTE

ASSIGN AASSIGN B ASSIGN 1 ASSIGN 2

CONTROL

FUNCTION

ON/OFF

MODE

KN 1 KN 2 KN 3 KN 4

VOICEPERFORM MASTER

MEQ LOW

MEQ HI MIDMEQLOWMID MEQ HIGH

ARPEGGIO

EFFECT BYPASS

SYSTEM

ON/OFF

INSERTION

MASTER

VOLUME 1VOLUME 2 VOLUME 3 VOLUME 4

VOLUME

SEQUENCER

SONG

FILE

PATTERN

SEQTRANSPORT

INTEGRATED SAMPLING

UTILITY

MIXING

SONG SCENE

SF 1SF 2SF 3SF 4SF 5

2

LOCATE

1

REC

EDIT

STORE

JOB

F1 F2 F3 F4 F6F5

SCENE STORE

COMPARE

SET LOCATE

CS 1 CS 2 CS 3 CS 4

ZONE 1 ZONE 2 ZONE 3 ZONE 4

MUSIC

SYNTHESIZER

PRODUCTION

Sequencer

Sampling

Integrated

Real-timeExternalControl

Surface

Modular

SynthesisPlug-in

System

SLOT 1 SLOT 2 SLOT 3

Voice Editor, File Utility, MIDI Setup

Once you‘ve installed these software programs, you can use your computer to edit the voices of the MOTIF as well as access and organize data stored to media connected to the MOTIF (Memory card and SCSI devices).

1 Double-click on the “Tools” folder in the CD-ROM.

“Motif” folder and “TWE” folder will be displayed.

2 Double-click on the “Motif” folder.

“Install File Utility” and “Install Voice Editor for MOTIF6” ﬁle will be displayed.

3 Double-click on the “Install File Utility” ﬁle.

The File Utility installation dialog will be displayed. Execute the installation by following the on-screen directions.

4 After installing the File Utility, double-click on the “Install Voice Editor for

MOTIF6” ﬁle. The Voice Editor installation dialog will be displayed. Execute the installation by following the on-screen directions.

4 The “Install Location” box displays the destination of the installation. If you

wish to change the destination disk or folder, use the [Switch Disk] button and the pop-up menu to specify the desired destination.

nThis box usually displays the start-up disk as the destination.

5 Click the [Install] button. The system displays the following message: “This

installation requires your computer to restart after installing this software. Click Continue to automatically quit all other running applications.” Click [Continue].

nTo cancel the installation, click [Cancel].

6 The installation starts. If the driver has already been installed, you will

receive the following message. To return to step 3, press [Continue]. To complete the installation, click [Quit].

5 After installing, restart the computer.

For details, refer to the on-line Help or the PDF owner’s manual.

TWE

With the TWE audio editing software, you can edit wave data directly on your computer.

1 Double-click on the “TWE” folder.

Four different language folders will be displayed.

2 Select the language that you want to use and double-click on its folder.

The “YAMAHA TWE” folder will be displayed.

3 Copy the “YAMAHA TWE” folder to the hard disk of your computer.

For details on how to use TWE, refer to the on-line manual provided in the folder.

10

Setup Files for remote control of sequencing

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

software

To use these ﬁles, the appropriate sequencing software should be installed to your computer.

Setup Files for Cubase

Same as for Windows. See page 7.

Preference File for Logic

1 Start Logic.

2 Select Key Commands... in Settings from the Option menu.

3 Select Import Key Commands... from the Option menu in the “Key

Commands” window called up via step #2.

4 In the dialog window called up via step #3, select the preference ﬁle for

Logic named “Logic Preferences” in the included CD-ROM and click [Open]. After importing the ﬁle, the following setup appears.

Cubase VST 5.0 Demo version

1 Double-click on the “Seq_Demo” folder.

The “Cubase” folder will be displayed.

2 Double-click on the “Cubase” folder.

The “Cubase VST 5.0 DEMO Installer” will be displayed.

3 Double-click on the “Cubase VST 5.0 DEMO installer” ﬁle.

4 Execute the installation by following the on-screen directions.

Logic Audio Platinum 4.6 Demo

1 Double-click on the “Seq_Demo” folder.

The “Logic” folder will be displayed.

2 Copy the “Logic” folder to the hard disk on your computer.

Setting up OMS

The OMS studio setup ﬁle for the MOTIF is contained in the included CDROM. This studio setup ﬁle is used for setting up OMS.

nBefore performing the following procedure, the OMS and USB MIDI Driver should be

installed.

1 Use a USB cable to connect the USB terminal of the computer (or the USB

hub) to the USB terminal of the MOTIF and turn the MOTIF’s power on.

English

Please note that the Key Command settings are replaced with the preference ﬁle.

Pro Tools

The special setup ﬁle is not necessary for using Pro Tools.

1 Select Peripherals... from the “Setup” menu.

2 Click the [MIDI Controllers] button in the “Peripherals” windows called up

via step #1. The MIDI Controllers window appears and set as follows.

Type Receive From Send to #ch’s

#1 CS-10 YAMAHA USB IN 0-3 YAMAHA USB OUT 0-3 16

nIf the MOTIF is connected to the computer via MIDI, set the port to 1.

The setup has been completed and you can control Pro Tools from the MOTIF.

2 Start the computer.

3 Insert the included CD-ROM into the CD-ROM drive of your Macintosh

computer. The CD-ROM icon appears on the desktop.

4 Double-click on the CD-ROM icon, “International”, “OMS”, and “OMS

Setup for YAMAHA.” The two ﬁles “MOTIF-USB” and “MOTIF-USB_multi” appear. Copy these to the hard disk on your computer.

5 Double-click on the “MOTIF-USB” or “MOTIF-USB_multi” ﬁle to start the

OMS Setup. Each studio setup ﬁle is as follows.

• MOTIF-USB This is used when connecting a single MOTIF to the computer and using one port (up to 16 MIDI channels).

• MOTIF-USB_multi This is used when connecting several MOTIFs to the computer and using up to eight ports (up to 128 MIDI channels). Note that one MOTIF can handle up to three ports (up to 48 MIDI channels).

Use of a USB hub is necessary when several MOTIFs are connected to the computer.

n

nBe sure to select [MOTIF-USB_multi] when using the Remote Control function of the

MOTIF via the USB cable, since Port 3 is used in this case.

11

6 After starting the OMS Setup, the Studio setup ﬁle double-clicked in step #5

opens.

For Windows/

English

nIf “ ” is not indicated at the right of the setup ﬁle name, select “Make Current” from

The OMS studio setup has been completed.

nAfter the OMS studio setup above has been completed, your computer will recognize

nThe included OMS studio setup ﬁle may not function even if you follow the above

For details about how to use OMS, refer to “OMS2.3J_Manual.pdf” supplied with OMS.

Indicates this setup is available

When opening “MOTIF-USB_multi”:

the “File” menu and execute the save operation.

only the MOTIF as a MIDI instrument. If you use another MIDI instrument in addition to the MOTIF or you add a second MOTIF to the existing system, you should create an original Studio Setup ﬁle. For details, refer to the on-line manual supplied with the OMS.

procedure, depending on your Macintosh/Mac OS version. (MIDI data cannot be transmitted/received even if the setup becomes available.) In this situation, connect your Macintosh to the MOTIF via the USB cable and follow the procedure below to re-create the setup ﬁle.

1 Start OMS Setup and select “New Setup” from the “File” menu.

2 The “OMS Driver Search” dialog appears. Remove the check from the “Modem” and

“Printer” check boxes, and click [Search] to execute the device search. If the Search operation has been completed successfuly, the [USB-MIDI] device is displayed in the OMS driver setting dialog.

3 Click the [OK] button to search for ports. Port 1, Port 2 ... appears in the dialog.

Mark the appropriate checkbox of the port and click the [OK] button to store the setting.

Macintosh Users

About USB Driver Setup window

From this window, you can change the MIDI port number transmitted to the MOTIF from the one set in the computer sequence software. The default settings are as follows.

Port number MIDI OUT terminal

1 MIDI OUT (1) MIDI IN (1)

2 MIDI OUT (2) MIDI IN (2)

3 MIDI OUT (3) MIDI IN (3)

4 MIDI OUT (4) -

5 MIDI OUT (5) -

6 MIDI OUT (6) -

7 MIDI OUT (7) -

8 MIDI OUT (8) -

* This is actually the MIDI port number set from the MIDI/OTHER display in

the Utility mode.

(Thru Port number*)

MIDI IN terminal (Track

Port number)

12

Troubleshooting

The driver cannot be installed.

• Is the USB cable connected correctly?

→ Check the USB cable connection. → Disconnect the USB cable, then connect it again.

• [Windows] Is the USB function enabled on your computer?

→ When you connect the MOTIF to the computer for the ﬁrst time, if the

“Add New Hardware Wizard” does not appear, the USB function on the computer may be disabled. Perform the following steps.

1 Double-click “System” in the Control Panel to open the System

Properties window.

2 Double-click the “Device Manager” tab and make sure that no “!” or

“x” marks appear at “Universal serial bus controller” or “USB Root Hub.” If you see an “!” or “x” mark, the USB controller is disabled. For more information, refer to the owner’s manual of your computer.

• [Windows] Is any unknown device registered?

→ If driver installation fails, the MOTIF will be marked as an “Unknown

device,” and you will not be able to install the driver. Delete the “Unknown device” by following the steps below.

1 Double-click “System” in the Control Panel to open the System

Properties window.

2 Double-click the “Device Manager” tab. With the “View devices by

type” check box checked, look for “Other devices.”

3 If you ﬁnd “Other devices,” double-click it to extend the tree to look

for “Unknown device.” If one appears, select it and click the [Remove] button.

4 Remove the USB cable from the MOTIF, and make the connection

again.

5 Install the driver again.

When controlling the MOTIF from your computer via USB, the MOTIF does not operate correctly or no sound is heard.

• Did you install the driver?

• Is the USB cable connected correctly?

•Are the volume settings of the tone generator, playback device, and application program set to the appropriate levels?

•Have you selected an appropriate port in the sequence software?

• Check whether the MIDI IN/OUT setting in the Utility mode corresponds to the actually used cable (USB or MIDI).

Cannot suspend or resume the computer correctly.

• Do not suspend the computer while the MIDI application is running.

• If you are using Windows 2000, you may not be able to suspend/resume normally, depending on the particular environment (USB Host Controller, etc.). Even so, simply disconnecting and connecting the USB cable will allow you to use the MOTIF functions again.

How can I delete or re-install the driver?

[Windows Me/98]

1 When the MOTIF is recognized correctly, double-click “System” in

the Control Panel to open the System window.

2 Double-click the “Device Manager” tab, select “YAMAHA USB

MIDI Driver” and delete it.

3 Use the MS-DOS prompt or Explorer to delete the following three

ﬁles.

n To delete these ﬁles using Explorer, select “Folder Options” from the

Tool (View) menu, and select “Show all ﬁles (and folders).”

• \WINDOWS\INF\OTHER\YAMAHAMOTIF6.INF

• \WINDOWS\SYSTEM\Xgusb.drv

• \WINDOWS\SYSTEM\Ymidusb.sys

4 Disconnect the USB cable. 5 Restart the computer. 6 Re-install the driver.

[Macintosh]

1 Delete the ﬁles in the following locations:

• System Folder | Control Panels | YAMAHA USB MIDI Patch

• System Folder | Extensions | USB YAMAHA MIDI Driver

• System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver

2 Restart the computer. 3 Install the driver and set up OMS.

English

Playback response is delayed.

• Does your computer satisfy the system requirements?

• Is any other application or device driver running?

[Macintosh]

→ Turn off virtual memory. → Disable AppleTalk.

13

Wichtige Hinweise zu CD-ROM

Datentypen

Diese CD-ROM enthält zwei verschiedene Datentypen: Anwendungssoftware und digitalisierte Audiodaten (Samples). Informationen zur Software-Installation ﬁnden Sie auf den Seiten 4 (Windows) und 9 (Macintosh). Informationen über die enthaltenen Audiodaten ﬁnden Sie auf Seite 14. Die Anwendungen erlauben Ihnen die Übertragung von Daten zwischen dem MOTIF und Ihrem Computer sowie die Bearbeitung der Daten auf dem Computer. Die Audiodaten können Sie mit Hilfe eines Audio-CD-Players (oder einer entsprechenden Abspiel- oder Ripping-Funktion Ihres Computers) über seine Audioeingänge in den MOTIF importieren. Für weitere Informationen hierzu schlagen Sie bitte in der Bedienungsanleitung des MOTIF nach. Die Anwendungssoftware beﬁndet sich auf Track 1 (als solcher wird der Datentrack von einem Audio-CD-Player erkannt) der CD, die Audiodaten beﬁnden sich auf den darauffolgenden Tracks.

Betriebssysteme

Die Anwendungen auf dieser CD-ROM liegen sowohl in einer Version für das Windows- als auch in einer Version für das Macintosh-Betriebssystem vor. Der Installationsvorgang und die Anwendungen selbst sind je nach verwendetem Betriebssystem unterschiedlich. Befolgen Sie daher die für Ihr Betriebssystem richtige Installationsanleitung.

Deutsch

Medienformate

Der MOTIF 6 / MOTIF 7 / MOTIF 8 und die File Utility-Software sind kompatibel mit den folgenden Medienformaten.

Spielen Sie NIEMALS Track 1 (enthält die Softwaredaten) auf einem Audio-CD-Player ab. Sie können dadurch sowohl Ihrem Gehör als auch Ihrem CDPlayer und Ihren Lautsprechern schwere Schäden zufügen.

→ Windows Siehe Seite 4. → Macintosh Siehe Seite 9.

• MS-DOS • ISO9660-CD-ROM

Der MOTIF und das File Utility können keine Inhalte von CD-ROMs für den Yamaha A5000/4000/3000 kopieren.

Falls eine Nur-Lese-Datei auf eine im MOTIF eingesteckte Speicherkarte oder ein am MOTIF angeschlossenes SCSI-Gerät kopiert wird, kann sie nicht durch den MOTIF gelöscht werden.

Der MOTIF kann den Inhalt der mitgelieferten CD-ROM nicht direkt lesen. Die CD-ROM ist exklusiv für die Verwendung mit einem Computer gedacht.

Für Windows-Benutzer

Inhalt der CD-ROM

Die CD-ROM enthält eine Reihe von Anwendungen (mit Installationsprogrammen), die Daten beﬁnden sich in den folgenden Ordnern.

Verzeichnis-Name Name der Anwendung Inhalt

Acroread_ Acrobat Reader* Anzeigeprogramm für PDF-Dateien (Portable Document Format). Dient zum Anzeigen der

Tools VEMOT_ Voice Editor for MOTIF6/MOTIF7/MOTIF8 Ermöglicht Ihnen die Bearbeitung der MOTIF-Voices auf Ihrem Computer.

FU_ File Utility Ermöglicht Ihnen die Verwaltung der Dateien auf der in den MOTIF eingesteckten Speicherkarte oder auf

TWE YAMAHA Wave Editor TWE V. 2.3 Ermöglicht Ihnen die Bearbeitung von Audio-(Wave-)daten auf Ihrem Computer und die Übertragung der

USBdrv_ YAMAHA USB-MIDI-Treiber (für Win98, Me) Ermöglicht die Kommunikation zwischen Ihrem Computer und dem MOTIF, wenn sie über ein USB-Kabel

USBdrv2k_ YAMAHA USB-MIDI-Treiber(für Windows 2000/XP) Ermöglicht die Kommunikation zwischen Ihrem Computer und dem MOTIF, wenn sie über ein USB-Kabel

Seq_Demo Cubase VST/32 Demo-Version* Demo-Version des Sequenzerprogramms Cubase VST/32.

* Yamaha gibt keine Garantie für die Stabilität dieser Programme (markiert mit einem Stern) und kann den Anwendern auch keine technische Unterstützung anbieten.

• Alle oben aufgelisteten Programme werden mit Online-Handbüchern/PDF-Anleitungen ausgeliefert.

• Sie können das File Utility oder den Voice Editor für MOTIF6/MOTIF7/MOTIF8 entweder als Stand-alone-Software oder als Plug-in-Anwendung in Programmen verwenden, die mit der Open-Plug-inTechnologie kompatibel sind. Weitere Informationen über die Verwendung des File Utility oder des Voice Editor für den MOTIF6/MOTIF7/MOTIF8 als Plug-In-Software ﬁnden Sie in der Bedienungsanleitung der Client-Anwendung (Sequenzer, usw.).

Anwendungshandbücher im PDF-Format.

einem SCSI-Gerät, das an den MOTIF angeschlossen ist.

Daten zwischen Ihrem Computer und dem MOTIF.

miteinander verbunden sind.

Name des Ordners Dateiname Inhalt

Remote Cubase Setup-Datei für Cubase Enthält die Einstellungen zur Steuerung von Cubase durch den MOTIF.

Logic Setup-Datei für Logic Enthält die Einstellungen zur Steuerung von Logic durch den MOTIF.

Liste der Voices

Sonar Setup-Datei für SONAR/Cakewalk ProAudio

Liste der Normal Voices Eine Liste der Normal Voices (tonal spielbaren Voices) des MOTIF

Liste der Drum Voices Eine Liste der Drum Voices (Schlaginstrument-Voices) des MOTIF

Liste der Performances Eine Liste der „Performances“ des MOTIF

Enthält die Einstellungen zur Steuerung von SONAR und Cakewalk auf Ihrem Computer durch den MOTIF.

2