Yamaha Audio ME02R96 User Manual
ME02R96
Owner’s Manual
Thank you for your purchase of the YAMAHA ME02R96 memory expansion kit for the 02R96 mixer.
By replacing the original CPU board with this ME02R96 expansion board, you will expand your
mixer’s automix memory to 7MB—a sevenfold increase that will make your mixer even more versatile and even easier to use.
The ME02R96 expansion kit must be installed by an authorized
serviceperson. Please contact a local Yamaha dealer or a service
center to arrange for installation. Do not attempt to install the
ME02R96 on your own.
Please read through the following precautions carefully before having the serviceperson install this
ME02R96 expansion kit. Be sure to retain the manual in a safe place.
Precautions
WARNINGS
Failure to observe the following warnings may lead to fatality or serious injury from fire or
electric shock.
Do not attempt to disassemble or modify the
●
ME02R96 board. Do not apply excessive force to
board connectors or other board components.
(Mishandling of the board may lead to shock, fire
hazard, or equipment failure.)
CAUTIONS
Failure to observe the following cautions may lead to injury, or may result in damage to
equipment or other property.
● Be sure to unplug the 02R96 main unit from the
power supply before installing the ME02R96
board (to eliminate shock hazard).
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
● Be careful to avoid catching or snagging fingers
while carrying out the installation.
● When handling the ME02R96 board, do not
touch the board’s metallic leads (pins). (Pins are
sharp and may cause hand cuts.)
● The ME02R96 board is electrostatic-sensitive.
Before handling the board, you should briefly
touch the main unit’s metal casing with your bare
hand so as to drain off any static charge from
your body.
● Before starting installation, be sure to save all
important data from the 02R96 unit to an external
MIDI device. This installation process will clear all
of the unit’s user memory and will reset all settings to their defaults.
● Be sure to install the included lithium battery. This
is a backup battery that is required maintain the
data in the 02R96’s expanded memory.
ME02R96
1
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or
data that is lost or destroyed.
* Please dispose of used batteries in accordance with local regulations.
* Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of
ENGLISH
the product.
* Company names and product names used herein are trademarks or registered trademarks of their respec-
tive owners.
* Use of the software and this manual is governed by the license agreement which the purchaser fully agrees
to upon breaking the seal of the software packaging. (Please read carefully the important information and
the Software Licensing Agreement of the Studio Manager’s installation guide included with 02R96 before
installing the software.)
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp.
reserves the right to change or modify products or specifications at any time without prior notice. Since
specifications, equipment or options may not be the same in every locale, please check with your Yamaha
dealer.
ADVARSEL!
Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af
samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren.
VARNING
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som
rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
NEDERLAND THE NETHERLANDS
● Dit apparaat bevat een lithium batterij voor
geheugen back-up.
● Raadpleeg uw leverancier over de verwijde-
ring van de batterij op het moment dat u het
apparaat ann het einde van de levensduur
afdankt of de volgende Yamaha Service
Afdeiing:
Yamaha Music Nederland Service Afdeiing
Kanaalweg 18-G, 3526 KL UTRECHT
Tel. 030-2828425
● Gooi de batterij niet weg, maar lever hem in
als KCA.
ME02R96
2
● This apparatus contains a lithium battery for
memory back-up.
● For the removal of the battery at the moment
of the disposal at the end of the service life
please consult your retailer or Yamaha Service Center as follows:
Yamaha Music Nederland Service Center
Address: Kanaalweg 18-G, 3526 KL
UTRECHT
Tel: 030-2828425
● Do not throw away the battery. Instead, hand
it in as small chemical waste.
● Note About Versions and Upgrades
System software:
The ME02R96 includes system version 1.20 or higher, and is not compatible with pre-V1.20 software. Before upgrading your 02R96 again in the future, be sure that your updater program is V1.20
or higher.
Studio Manager:
The ME02R96 is not compatible with Studio Manager versions prior to V1.1.1. If your version is
older than V1.1.1, please replace it by installing the Studio Manager version included on the accompanying CD-ROM. For information about how to carry out the installation, refer to Studio Manager’s
installation guide.
Note that Macintosh system requirements are now as indicated in the table below.
Macintosh System Requirements
Computer A Macintosh G3/233 MHz or better and a USB port
OS Mac OS 8.6 to 9.2.2 (Mac OS X not supported)
Memory 120 MB or more of free memory (Virtual memory must be turned off)
Hard Disk 7 MB or more
Display 1024
Other OMS 2.3.3 or later
Note: If you are using a PowerBook on battery power, open the Energy Save
control panel, and in Advanced Settings, Additional Power Savings, turn off
Allow processor cycling.
For the latest information about System software and Studio Manager, please visit our website at:
www.yamahaproaudio.com.
× 768 pixels, 256 colors or higher
× 1024, 32,000 colors recommended
1280
ENGLISH
● Save the Data from the 02R96
The board installation procedure will clear all 02R96 user memory, and will reset all 02R96 settings to
their defaults. Before starting installation, use the following procedure to save the data from the 02R96
into an external MIDI device. You can then restore the data after completing the installation.
As an alternative, you can use Studio Manager to save the 02R96 data into a computer. For details,
refer to the Studio Manager owner’s manual (PDF file).
1. Press the DISPLAY ACCESS [MIDI] key to open the Bulk Dump page.
2. Set CATEGORY to ALL, select the TRANSMIT button, and then press the [ENTER] key to
start the save.
ME02R96
3
Loading...