Yamaha Audio ICP1 User Manual
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
1
ICP1 Owner’s Manual
Thank you for choosing the Yamaha ICP1 Intelligent Control Panel. Please refer to
the DME64N/24N Owner's Manual for operational details.
Please read the "Precautions" section of this document thoroughly before installation.
For ICP1 installation refer to your Yamaha dealer, or the nearest Yamaha
representative or authorized distributor listed in this document.
Vielen Dank für Ihre Wahl des Intelligent Control Panel ICP1 von Yamaha. Bitte
lesen Sie zur Bedienung die ME64N/24N Bedienungsanleitung.
Bitte lesen Sie vor der Installation auch den Abschnitt über die Vorsichtsmaßnahmen
in diesem Dokument sorgfältig durch.
Zur Installation des ICP1 wenden Sie sich an Ihren Yamaha-Händler, an die nächste
Yamaha-Werksvertretung oder einen der in diesem Dokument aufgelisteten
autorisierten Vertriebe.
Merci d'avoir choisi le panneau de contrôle intelligent Yamaha ICP1. Reportezvous au mode d'emploi du DME64N/24N pour obtenir les détails sur le
fonctionnement de l'ICP1.
Veuillez lire attentivement la section « Précautions » avant de procéder à l'installation.
Pour installer l'ICP1, adressez-vous à votre revendeur Yamaha ou à votre
représentant ou distributeur Yamaha agréé le plus proche, dont la liste figure dans ce
document.
Gracias por haber adquirido el panel de control inteligente Yamaha ICP1.
Consulte en el DME64N/24N – Manual de instrucciones los datos de
funcionamiento.
Lea detenidamente la sección "Precauciones" de este documento antes de la
instalación.
Para la instalación del ICP1 consulte al distribuidor o representante de Yamaha o al
distribuidor autorizado más próximo de los que figuran en este documento.
J
Owner’s Manual
J
Bedienungsanleitung
J
Mode d’emploi
J
Manual de instrucciones
ICP1
INTELLIGENT CONTROL PANEL
J
Owner’s Manual
J
Bedienungsanleitung
J
Mode d’emploi
J
Manual de instrucciones
ICP1
INTELLIGENT CONTROL PANEL
J
Owner’s Manual
J
Bedienungsanleitung
J
Mode d’emploi
J
Manual de instrucciones
ICP1
INTELLIGENT CONTROL PANEL
J
Owner’s Manual
J
Bedienungsanleitung
J
Mode d’emploi
J
Manual de instrucciones
ICP1
INTELLIGENT CONTROL PANEL
2
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ICP1 Owner’s Manual
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure
to follow instructions could void your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use
of this product in a residential environment will not result in harmful interference with other electronic devices. This
equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the
users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC
regulations does not guarantee that interference will not occur in all installations. If this product is found to be the
source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized
to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha
Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its
subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying
the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (2 wires)
European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 70A
Conforms to Environments: E1, E2, E3 and E4
Europäische Modelle
Käufer/Benutzerinformationen nach EN55103-1 und EN55103-2.
Einschaltstrom: 70A
Entspricht den Umgebungen: E1, E2, E3 und E4
Pour les modèles distribués en Europe
Les informations d'achat/utilisation sont décrites dans les documents EN55103-1 et EN55103-2.
Courant d'appel : 70A
Conformité aux normes environnementales : E1, E2, E3 et E4
Modelos europeos
Información comprador/usuario especificada en EN55103-1 y EN55103-2.
Intensidad de entrada: 70A
Conforme para entornos: E1, E2, E3 y E4
3
ICP1 Owner’s Manual
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
JJ
JJ
Package Contents (Please check before using)
JJ
JJ
Packungsinhalt (bitte vor Verwendung prüfen)
JJ
JJ
Contenu de l'emballage (veuillez vérifier le contenu avant utilisation)
JJ
JJ
Contenido del paquete (compruébelo antes de su uso)
The illustrations in this document are for instructional purposes, and may appear somewhat different
from the actual equipment.
Ethernet is a trademark of Xerox Corporation.
All other trademarks are the property of their respective holders and are hereby acknowledged.
Die Abbildungen in diesem Dokument dienen der Gebrauchsanleitung und könnten sich vom
tatsächlichen Gerät geringfügig unterscheiden.
Ethernet ist eine Handelsmarke der Xerox Corporation.
Alle anderen Handelsmarken sind Eigentum der betreffenden Firmen und werden hiermit anerkannt.
Les illustrations figurant dans ce document sont fournies à titre indicatif et peuvent être quelque peu
différentes de celles qui apparaissent réellement sur votre équipement.
Ethernet est une marque commerciale de Xerox Corporation.
Toutes les autres marques commerciales sont la propriété de leur détenteurs respectifs et sont
reconnues telles par Yamaha.
En este documento se incluyen ilustraciones y pantallas con fines ilustrativos únicamente y podrán no
coincidir con las del equipo real.
Ethernet es una marca comercial de Xerox Corporation.
Las demás marcas comerciales pertenecen a sus respectivos propietarios y quedan reconocidas en
este documento.
• ICP1 Owner's Manual (this document)
• Control panel unit
• Frame plate for ICP1
• AC adaptor (PA-300)
• ICP1 adaptor box
• ICP1-Bedienungsanleitung (dieses Dokument)
• Bedienungseinheit
• Rahmenplatte für ICP1
• Netzteil (PA-300)
• ICP1-Adapterbox
• Mode d'emploi de l'ICP1 (ce manuel)
• Unité du panneau de contrôle
• Plaque à cadre de l'ICP1
• Adaptateur secteur (PA-300)
• Boîtier de l'adaptateur ICP1
•
Manual de instrucciones del ICP1 (este documento)
• Unidad del panel de control
• Placa para el ICP1
• Adaptador de CA (PA-300)
• Caja adaptadora del ICP1
4
ENGLISH
ICP1 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are
not limited to, the following:
• Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of
the device.
• Use only the specified AC power adaptor(PA-300 or an equivalent recommended by Yamaha).
• Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on,
trip over, or roll anything over it.
• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device
contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and
have it inspected by qualified Yamaha service personnel.
• Do not expose the device to rain, or use it near water or in damp or wet conditions.
• Never insert or remove an electric plug with wet hands.
• If the power cord or plug becomes frayed or damaged, or if you notice any unusual smells or smoke,
immediately disconnect the electric plug from the outlet and have the device inspected by qualified Yamaha
service personnel.
• If this device, the AC power adaptor, or the adaptor box should be dropped or damaged, immediately
disconnect the electric plug from the outlet and have the device inspected by qualified Yamaha service
personnel.
Power supply/Power cord
Do not open
Water warning
If you notice any abnormality
Loading...