Yamaha Audio A15, A15W, A12, A10, A12M User Manual

ENGLISH
Owner’s Manual
使用说明书
SPEAKER SYSTEM
A10/A12/A15/A12M
A15W
EN
ZH
Thank you for choosing this YAMAHA speaker system. In order to take maximum advantage of the speaker’s fea-
Water warning
tures and ensure maximum performance and longevity, please read this manual carefully before using the speaker system. Keep the manual in a safe place for future reference.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not open
• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.
• Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:
Location
• If you use a stand, make sure to observe the following precautions in order to avoid toppling the device or causing damage to the internal components.
- Check the stand’s specifications and make sure that it is sturdy enough to
support the weight of the speaker.
- Mount only one speaker on each speaker stand.
- Use the supplied screws if included.
-Tighten fastening screws securely.
- Use the speaker stands with their legs fully opened.
- Use the stand at a height of less than 140cm (55").
- Add weight such as sand bags around the stand legs to prevent them from
falling over.
- Remove the speakers from the stands before moving the stands or adjusting
their height.
- Limit the number of people around the placed stand.
We recommend using the TS-80 and TS-90 speaker stands manufactured by Ultimate Support Systems, Inc. (sold separately) to support the speakers.
• If you use the metal socket on the subwoofer for mounting of a satellite speaker, use a pole no longer than 90cm (35.4") with an outer diameter of 35mm (1-3/8"). Use of any other size pole may cause the device to fall, and result in injury or damage to the internal components.
• When transporting or moving the device, always use two or more people. Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the speaker’s handles for suspended installation. Doing so can result in damage or injury.
• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
• Do not place the device in an unstable position where it might accidentally fall over.
2
(6)-1
Loading...
+ 4 hidden pages