Before using the instrument, be sure to read “PRECAUTIONS” on pages 2 - 4.
Page 2
PRECAUTIONS
Power supply
Do not disassemble
Water warning
Fire warning
Batteries
PLEASE READ CAREFULLY BEFORE PROCEEDING
Especially in the case of children, a guardian should provide guidance on how to properly use and handle the product before actual use.
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other
hazards. These precautions include, but are not limited to, the following:
• Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively
bend or otherwise damage the cord, or place heavy objects on it.
• Do not touch the product or the power plug during an electrical storm.
• Use only the correct voltage specified for the product. The require d voltage is printed on the name plate
of the product.
• Use only the supplied or the specified AC adaptor (page 23). Do not use the AC adaptor for other
devices.
• Check the power plug periodically and remove any dirt or dust which may have accumulated on it.
• Insert the power plug firmly all the way into the AC outlet. Using the product when it is not plugged in
sufficiently can cause dust to accumulate on the plug, possibly resulting in fire or skin burns.
• When setting up the product, make sure that the AC outlet you are using is easily accessible. If some
trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the
outlet. Even when the power switch is turned off, as long as the power cord is not unplugged from the
wall AC outlet, the product will not be disconnected from the power source.
• Do not connect the product to an electrical outlet using a multi-plug outlet extender. Doing so can result
in lower sound quality, or possibly cause overheating in the outlet.
• When disconnecting the power plug, always hold the plug itself and not the cord. Pulling by the cord
can damage it and cause electric shocks or a fire.
• If not using the product for long periods of time, be sure to pull the power plug from the AC outlet.
• This product contains no user-serviceable parts. Do not attempt to disassemble the internal parts or
modify them in any way.
2 NP-35, NP-15 Owner’s Manual
DMI-11 1/3
• Do not expose the product to rain, use it near water or in damp or wet conditions, or place on it any
containers (such as vases, bottles or glasses) containing liquids which might spill into any openings
or places where water may drop. A liquid such as water getting into the product may cause a fire, electric
shocks, or malfunctions.
• Use the AC adaptor indoors only. Do not use in any wet environments.
• Never insert or remove a power plug with wet hands.
• Do not place any burning items or open flames near the product, since they may cause a fire.
• Do not dispose of a battery in a fire.
• Do not expose the battery to conditions of extreme low air pressure, cold or heat (such as in direct
sunlight or a fire) or excessive dust or humidity.
Doing so may result in the battery bursting, causing a fire or injury.
• Follow the precautions below. Failure to do so might result in battery fluid leakage. If the contents of
the battery gets on your hands or in your eyes, it can cause blindness, chemical burns, and damage of
the product.
- Use the specified battery type (page 9) only.
- Do not use new batteries together with old ones.
- Do not mix battery types.
- Always make sure all batteries are inserted in conformity with the +/- polarity markings.
- Do not disassemble a battery.
- When the batteries run out, or if the product is not to be used for a long time, remove the batteries
from the product.
- Do not attempt to recharge batteries that are not designed to be charged.
Page 3
• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact
If you notice any abnormality
Location
Connections
Handling
with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is
corrosive and may possibly cause loss of sight or chemical burns.
• When using rechargeable batteries, follow the instructions that came with the batteries. Use only the
specified charger device and within the specified charging temperature range when charging.
Charging with an unspecified charger or at a temperature outside the range may cause leakage,
overheating, explosion, or malfunction.
• For battery installation and removal, be sure to read this manual and follow the instructions. Failure to
comply may result in fire, overheating, explosion or malfunction.
• Keep batteries away from children. A child could accidentally swallow a battery. Failure to observe this
may also cause inflammation due to battery fluid leaks.
• Do not subject batteries to mechanical shock. D oing so may cause damage caused by batteries, electric
shock, or malfunction.
• Do not intentionally short the battery. Explosion or liquid leakage may cause fire or injury.
• Do not put batteries in a pocket or bag, or carry or store them together with pieces of metal. Batteries
kept in such condition could short, burst, or leak, causing a fire or injury.
• When storing or discarding batteries, insulate the terminal area by applying tape, or some other
protection. Mixing them with other batteries or metal objects can cause a fire, burns, or inflammation
due to fluid.
• If any of the following problems occur, immediately turn off the power switch and disconnect the power
plug from the outlet. If you are using batteries, remove all batteries from the product. Finally have the
device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These
precautions include, but are not limited to, the following:
• Do not rest your weight on, or place heavy objects on the product, and do not use excessive force on
the buttons, switches or connectors.
• Do not place the product in an unstable position or a location with excessive vibration, where it might
accidentally fall over and cause injury.
• Before moving the product, remove all connected cables, to prevent damage to the cables or injury to
anyone who might trip over them.
• Use only the stand specified for the product. When attaching it, use the provided screws only. Failure
to do so could cause damage to the internal components or result in the product falling over.
• Before connecting the product to other devices, turn off the power for all devices. Before turning the
power on or off for all devices, set all volume levels to minimum.
• Be sure to set the volumes of all devices a t their minimum levels and gradually raise the volume controls
while playing the product to set the desired listening level.
• Do not insert foreign materials such as metal or paper into any openings or gaps of the product. Failure
to observe this may cause a fire, electric shocks, or malfunctions.
• Do not use the product or headphones for a long period of time at a high or uncomfortable volume level,
since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears,
consult a physician.
• Remove the power plug from the AC outlet before cleaning the unit. Failure to observe this may cause
electric shocks.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the
product, or data that is lost or destroyed.
Always turn the power off when the product, is not in use.
Even when the [ ] (Standby/On) switch is in standby status (all button lights are off), electricity is still
flowing to the product, at the minimum level.
When you are not using the product, for a long time, make sure you unplug the power cord from the wall
AC outlet.
DMI-11 2/3
NP-35, NP-15 Owner’s Manual 3
Page 4
NOTICE
To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other
property, follow the notices below.
Handling
• Do not use this product in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric
devices. Otherwise, this product or the other device may generate noise.
• When you use the product along with an app on your smart device, such as a smartphone or tablet, we
recommend that you enable “Airplane Mode” on the device to avoid noise caused by communication.
• Depending on the condition of surrounding radio waves, the product may possibly malfunction.
• Do not expose the product to excessive dust or vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater, or in a car during the day) to prevent the possibility of disfiguration, damage to
the internal components or unstable operation. (Verified operating temperature range: 5°C - 40°C, or
41°F - 104°F.)
• Do not place vinyl, plastic or rubber objects on the product, since this might discolor the product.
Maintenance
When cleaning the product, use a soft and dry (or slightly damp) cloth. Do not use paint thinners, solvents,
alcohol, cleaning fluids, or chemical-impregnated wiping cloths.
Saving data
• Some of the data of this product (page 17) are retained when the power is turned off. However, the saved
data may be lost due to some failure, an operational mistake, etc.
Information
About copyrights
• The copyright of the “content”*1 installed in this product belongs to Yamaha Corporation or its
copyright holder. Except as permitted by copyright laws and other relevant laws, such as copying for
personal use, it is prohibited to “reproduce or divert”*
When using the content, consult with a copyright expert.
If you create music or perform with the contents through the original use of the product, and then record
and distribute them, the permission of Yamaha Corporation is not required regardless of whether the
distribution method is paid or free of charge.
*1: The word “content” includes a computer program, audio data, Accompaniment Style data, MIDI data,
waveform data, voice recording data, music score, and score data, etc.
*2: The phrase “reproduce or divert” includes taking out the content itself in this product, or recording and
distributing it without changes in a similar manner.
About functions/data bundled with the product
Some of the preset Songs have been edited for length or arrangement, and may not be exactly the same as
the original.
2
without the permission of the copyright holder.
About the appearance of this product
• This product may appear to have lines or scratches on the surface. The apparent lines or scratches are
called “weld lines.” They occur during the process of modeling the case and do not affect the
functionality of the product.
About this manual
• The illustrations as shown in this manual are for instructional purposes only.
• The keyboard illustrations in this manual use the NP-35 to represent both the NP-35 and NP-15.
• The company names and product names in this manual are the trademarks or registered trademarks of
their respective companies.
About disposal
• When disposing of this product, please contact the appropriate local authorities.
• Make sure to discard used batteries according to local regulations.
The model number, serial number, power requirements, etc., may be
found on or near the name plate, which is at the bottom of the unit.
You should note this serial number in the space provided below and
retain this manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
4 NP-35, NP-15 Owner’s Manual
DMI-11 3/3
Page 5
Thank you for choosing the Yamaha NP-35/NP-15 Piaggero.
This instrument features an expressive keyboard and exceptionally high-quality piano Voices that evoke the feeling of a real piano in a slim, lightweight
body. This is a digital keyboard that you can take with you and play anywhere, easily and conveniently. Please read this manual carefully in order to make
full use of the built-in functionality of the instrument. Also, keep this manual in a safe and handy place for future reference.
Index .............................................................................24
NP-35, NP-15 Owner’s Manual 5
Page 6
Introduction
Insert into the slot
* The illustration shows the NP-35.
About the Manuals
The following manuals are provided for the instrument.
Included Documents
• Owner’s Manual (this book)
Explains the basic operations of the instrument.
Online Materials
• Smart Pianist User Guide
Explains how to connect and set up the smart device app
“Smart Pianist” for conveniently controlling the instrument
from your smartphone or tablet.
• Computer-related Operations
Explains how to connect your computer to the instrument,
and other related matters.
• MIDI Reference
Contains MIDI-related information for the instrument.
These manuals are available from the Yamaha
Downloads website.
Yamaha Downloads
https://download.yamaha.com/
Symbols
Indicates instructions and supplementary explanations
[ ]
for optimum use.
Indicates buttons and jacks.
Accessories
Owner’s Manual (this book) ×1
AC adaptor ×1
(May not be included depending on your particular area. Please check with your Yamaha
dealer.)
Online Member Product Registration ×1
Music rest ×1
Attaching the Music rest
Smart device application (free download)
You can use the following apps by connecting the instrument to a smart
device.
“Smart Pianist”“Rec'n'Share”
For details on the app and the compatible devices,
see the website below.
https://www.yamaha.com/2/kbdapps/
6 NP-35, NP-15 Owner’s Manual
Page 7
Panel Controls and Connectors
* The illustration shows the NP-35.
The NP-35 and NP-15 feature a different number of keys (NP-35: 76 keys; NP-15: 61 keys).
Top Panel
[VOLUME]
For controlling the volume. Turning the dial toward [MAX] increases
the volume, while turning toward [MIN] decreases it.
[ ] (Standby/On)
Turns the power on/off. Set the volume to minimum before turning the
power on.
Press the button to turn the power on (the [PIANO] lamp lights).
Holding down the button for about one second turns all button lamps
and the power off.
[DEMO]... page 10
[METRONOME]... page 14
Voice buttons... page 10
[t]TEMPO[s], [<]BEAT[>]... page 14
[REC]... page 16
[PLAY]... page 16
NP-35, NP-15 Owner’s Manual 7
Page 8
Panel Controls and Connectors
* The illustration shows the NP-35.
Half-pedal function
This function is available when the Foot Pedal FC3A is connected, allowing
you to vary the sustain length depending on how far the pedal is pressed.
The farther down you press the pedal, the more the sound sustains. For
example, if you press the damper pedal and all the notes you are playing
sound indistinct and loud with too much sustain, you can release the pedal
halfway or higher to decrease the sustain and increase the clarity of the
notes. This function is not available for the FC4A or FC5 Footswitch.
Adaptor plug
(stereo standard plug):
6.35 mm
• Headphones are sold
separately.
• To use headphones that have
a stereo mini-plug cable, you
will need an adaptor plug
(stereo standard plug).
Stereo mini plug:
3.5 mm
Rear Panel
[SUSTAIN]
For connecting a separately sold Foot Pedal FC3A or a separately
sold Footswitch FC4A/FC5 (page 23). Pressing the connected Foot
Pedal/Footswitch sustains notes longer.
• Turn the power off when connecting or disconnecting the Foot
Pedal/Footswitch.
• Do not turn the power on while pressing the Foot Pedal/Footswitch.
Otherwise, the pedal or switch type (on/off) might be reversed.
[USB TO HOST]
For connecting to a computer using a commercially available USB
cable. When connected, you can send and receive MIDI and audio
data. For details, see the “Computer-related Operations” (mentioned
on page 6 of this book) on the website.
NOTICE
8 NP-35, NP-15 Owner’s Manual
Use an AB-type USB cable of less than 3 meters. USB 3.0 cables
cannot be used.
[PHONES/OUTPUT]
For connecting a set of standard stereo headphones. This jack also
functions as an external output. The speakers of the instrument are
automatically shut off when a plug is inserted into this jack.
CAUTION
NOTICE
Turn the power of the instrument and any external devices off
before connecting. Also, be sure set their volume to minimum
(“0” setting) before turning the power of these devices on or
off. Failure to do so may cause electric shock, hearing loss, or
damage to your devices.
Be sure to turn the power of these devices on/off in the following
order to avoid equipment damage.
Turning the power on: (1) the instrument, (2) external device
Turning the power off: (1) external device, (2) the instrument
DC IN jack... page 9
Page 9
Setting Up
(1) DC IN jack
(2)
AC outlet
AC
adaptor
Plug
Slide the plug as indicated
*The illustration
shows the NP-35.
WARNING
Be sure to read “Power supply” (page 2) and “Batteries” (page 2) in the “PRECAUTIONS” before you begin. Improper
handling may result in product failure, overheating, fire, or other problems.
Although the instrument will run from either an AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible, for
optimum eco-friendly operation.
Using an AC Adaptor
Connect the AC adaptor to the DC IN jack and an AC outlet following the
order of (1), (2) in the illustration below. When disconnecting, turn the
power off and disconnect the AC adaptor in the order of (2), (1).
• The instrument itself cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an AC adaptor
is connected while batteries are installed in the instrument.
• Alkaline or rechargeable Ni-MH batteries are recommended because
the instrument may consume a large amount of power.
1 Make sure that the power of the instrument is off.
2
WARNING
• Use only the supplied or the specified AC adaptor (page 23). Use
of other adaptors may result in product failure, overheating, fire,
or other problems. Yamaha cannot be held responsible for
damage caused by improper use even if the instrument is under
warranty.
• If the plug is removable, make sure to keep the plug attached to
the AC adaptor. Using the plug alone can cause electric shock or
fire.
• If the plug is removed accidentally, slide the plug into place
without touching the metallic parts, and then push the plug in
completely until it clicks. To avoid electric shock, short circuit, or
damage, also be careful that there is no dust between the AC
adaptor and plug.
Put the instrument upside down on a soft cloth, and open
the battery compartment cover located on its bottom panel.
3 Insert six batteries by following the polarity markings on
the side of the compartment.
4 Close the battery compartment cover.
• When battery power becomes too low, the instrument may not function
properly. When this happens, make sure to replace all batteries with
new ones or already-recharged ones.
• Connecting or disconnecting the AC adaptor with batteries installed
may turn the power off. Use caution, as any data you are recording will
be lost when the power is turned off.
NP-35, NP-15 Owner’s Manual 9
The shape of the plug and outlet differ depending on the
particular locale.
NOTICE
Page 10
Enjoying the Sounds of the Instrument
WhiteBlueOrange
• Simply pressing [DEMO] starts the Demo Song sequence from “Concert Grand.”
• You can also change the tempo during playback. This is done in the same way as with the
Metronome (pages 14-15).
Selecting and Playing Voices
Listening to the Voice Demo Songs
Select the desired Voice from one of the 15 instrument sounds (Voices) available for
playing on the keyboard.
Press the desired Voice button.
Three Voices are assigned to each Voice button. You can switch between the three Voices
assigned to the button in sequence by pressing it, and the color of the button light changes
accordingly. See the Voice list on page 11 for the Voices assigned to each button.
The instrument features special Voice Demo Songs that effectively showcase each of the
Voices.
While holding down [DEMO], press the desired Voice button.
The Songs for each Voice will play back in sequence, beginning with the Voice you selected.
During playback, you can change the Voice Demo Song by pressing either the same or a
different Voice button. Press [DEMO] to stop playback.
10 NP-35, NP-15 Owner’s Manual
Page 11
Enjoying the Sounds of the Instrument
Voice/Voice Demo Song List
Panel Name
PIANOWhiteConcert GrandHall 1YesThis sound was sampled from a concert grand piano. It uses
E.PIANOWhiteDX E. PianoStage—An electronic piano sound created by FM synthesis. Good for
ORGANWhiteOrgan PrincipalHall 3—This is a typical pipe organ sound (8' + 4' + 2'). Good for sacred
HARPSI./VIB.WhiteHarpsichord 8'RoomYesThe definitive instrument for baroque music. Authentic
STRINGSWhiteStringsHall 3—Stereo-sampled strings ensemble with realistic reverberation. Try
OrangeMellow GrandHall 1YesSoft piano sound. Ideal for relaxed jazz ballads and easy listening
BlueBright GrandHall 1YesBright and clear piano sound that works well in popular music.Original
OrangeStage E. PianoStage—The electric piano sound of hammer-struck metallic “tines” like
BlueVintage E. PianoStage—The electric piano tone that is pronounced by tapping a thin flat
OrangeOrgan TuttiCathedral—This is the organ’s full coupler sound often associated with
BlueJazz OrganRoom—Warm and edgy electric organ sound, often used in jazz and rock
OrangeHarpsichord 8'+4'RoomYesMixes the same Voice an octave higher for a more brilliant tone. Gigue, Französische Suiten Nr. 5,
BlueVibraphoneStage—This warm vibraphone sound is created by the rotation of a spring
OrangeStrings PadHall 2—This is the sound of an expansive string ensemble. Try combining
BlueSynth PadHall 2—A warm, mellow, and spacious synth sound. Ideal for sustained
Voice Name
Reverb
Type
Damper
Resonance
Voice DescriptionVoice Demo Song
different samples depending on the strength of your playing and
produces smoother tonal changes. Suitable not only for classical
compositions but also for piano pieces of any style.
pop.
standard popular music.
tuning forks. Soft tone when played lightly, and aggressive tone
when played strongly.
metal reed with a hammer. Used in soul and popular music.
music from the Baroque period.
Bach’s “Toccata and Fugue.”
music.
harpsichord sound, with plucked strings, no touch response, and
characteristic key-release sound.
attached to the resonance tube under the soundboard, and
features the use of a relatively soft mallet.
combining this Voice with piano in the Dual mode.
this Voice with a piano or electric piano in the Dual mode.
parts in the background of an ensemble.
Original
Original
Original
Original
Original
Herr Christ, der ein’ge GottesSohn, BWV 601 (J. S. Bach)
Original
Original
*ensemble with “Stage E. Piano”
Concerto a cembalo obbligato, 2
violini, viola e continuo No. 7, BWV
1058 (J. S. Bach)
BWV 816 (J. S. Bach)
Original
Original
Original
*ensemble with “Concert Grand”
Original
*ensemble with “Concert Grand”
NP-35, NP-15 Owner’s Manual 11
Page 12
Enjoying the Sounds of the Instrument
(Numbers 1 to 0 are printed above the keys on the top panel.)
You can also change the tempo during playback. This is done in the same way
as with the Metronome (pages 14-15).
Listening to the Piano Demo Songs
You can listen to 10 Piano Demo Songs that use the built-in “Concert Grand” Voice
(page 11).
Select the number of the song you want to listen to (referring to the
list below) by pressing the corresponding key while holding down
[DEMO].
The songs will play back in sequence, beginning with the song you selected.
Press [DEMO] to stop playback.
NP-35 Piano Demo Song ListNP-15 Piano Demo Song List
No.TitleComposerNo.TitleComposer
1 Nocturne op. 9-2F. F. Chopin1 Piano Sonata No. 15 K. 545 1st mov.W. A. Mozart
2 Fantaisie-ImpromptuF. F. Chopin2 Turkish MarchW. A. Mozart
3 Piano Sonata No. 15 K. 545 1st mov.W. A. Mozart3 Prelude (Das Wohltemperierte Klavier I Nr. 1)J. S. Bach
4 Turkish MarchW. A. Mozart4 Menuett G dur BWV Anh. 114J. S. Bach
5 Für EliseL. v. Beethoven5 TräumereiR. Schumann
6 TräumereiR. Schumann6 Moments Musicaux op. 94-3F. P. Schubert
7 Arabesque No. 1C. A. Debussy7 Valse op. 69-1 “L’adieu”F. F. Chopin
8 Liebesträume Nr. 3F. Liszt8 AriettaE. H. Grieg
9 The EntertainerS. Joplin9 Je te veuxE. Satie
0 Je te veuxE. Satie0 La chevaleresqueJ. F. Burgmüller
When using the NP-15 and playing one of the star-marked Songs above on the
keyboard, set “Octave Shift” to “-1” (page 19).
12 NP-35, NP-15 Owner’s Manual
Page 13
Enjoying the Sounds of the Instrument
• The colors of the button light to indicate which Voice is selected (page 11).
• In Dual, the reverb type assigned to Voice 1 takes priority.
• When making the settings using the “Smart Pianist” smart device app (page 6), you can layer
the Voice for the same button.
Raise
by 1
Lower
by 1
Setting the octave for
Voice 1/Voice 2 (Octave
Shift)
You can shift the pitch up or down in
octave steps for the two Voices. Voice
1 and Voice 2 can be set separately.
Setting range: –1 to +1
Default setting: Optimum setting for
each Voice combination
You can set this function in
addition to the Octave Shift
(page 19).
To restore the default setting, press the
corresponding key indicated by for that setting.
You can adjust the volume balance between the two Voices.
Setting range: –6 to +6
Default setting (F♯4): Optimum volume balance for each Voice combination
Example: Press the F4 key to increase the volume of Voice 2,
and press the G4 key to decrease it.
Voice
2
Voice
1
Voice 1
Voice 2
Value
Volume balance between Voice 1/Voice 2
Combining Voices (Dual)
Dual Settings
You can edit the and settings in Dual by pressing the keys as shown in the illustration below while holding
down [METRONOME].
You can layer two Voices and play them simultaneously.
Choose two desired Voices, and then press those Voice buttons simultaneously.
Press one of the Voice buttons to exit from Dual.
In Dual, the Voice button on the left that you pressed becomes Voice 1, and the Voice button
on the right becomes Voice 2. You cannot layer two Voices for the same button using only
this instrument.
NP-35, NP-15 Owner’s Manual 13
Page 14
Using the Metronome
Turning the Metronome on
Adjusting the Tempo (Speed)
Setting the Beat
Press [METRONOME] to turn the metronome on.
The metronome starts in time with the current tempo and beat (see below).
Press [METRONOME] again to stop.
Hold down [METRONOME] and press [t] or [s] while the metronome is
playing.
Press [t]/[s] simultaneously to restore the default setting.
You can also enter a specific tempo number by using the keyboard (refer to figure ,
on page 15).
Setting range: 32 to 280 (default setting: 120)
Hold down [METRONOME] and press [<] or [>] while the metronome is
playing.
A bell sound is added to the first beat. For example, if you set this to 3, the first beat is
accented with a bell sound and the rest with clicks.
Press [<]/[>] simultaneously to restore the default setting.
You can also set the beat by using the keyboard (refer to figure on page 15).
Setting range: 0 (no beat: default setting), 2/3/4/5/6 beats
• If you turn the metronome on while a Song is playing back, the metronome sounds at the tempo and beat that is preset for each Song. When the Song stops, the
tempo and beat of the metronome return to their settings before the song was played back.
• The tempo returns to its default setting when you turn the power of the instrument off. Since the beat data is backed up (page 17), the beat settings are maintained
even if you turn the power of the instrument off.
14 NP-35, NP-15 Owner’s Manual
Page 15
Using the Metronome
G6
Entering a specific tempo number
The keys corresponding to numbers 1–0 can
be used for numeric input (the numbers are
shown on the top panel of the instrument).
For example, to set the tempo to “70”:
Press the F♯1 (7) and then A1 (0) keys in
sequence while holding down
[METRONOME].
Tempo adjustment
Setting the beat*
Metronome volume*
Setting range: 1 to 20 (default setting: 10)
To restore the default setting, press the corresponding
key indicated by for that setting.
Raise
by 1
Lower
by 1
Raise
by 10
Lower
by 10
Confirming the current tempo value by
audible voice (in English)
Items marked with an asterisk are backed up (page 17).
Setting the Metronome Using the Keyboard
While holding down [METRONOME], pressing the corresponding keys shown in the illustration below allows you to make the – settings for the
metronome.
NP-35, NP-15 Owner’s Manual 15
Page 16
Recording Your Performance
Recording standby
Flashes
Start recording
Lights Flashes
Stop recording
Turns offLights
Currently playing back
Flashes
Flashes
Deletion standby
Flashes
Deletion start
Turns off
Deletion finished
You can record one Song on the instrument. Since the settings such as the Voices to use cannot be changed once recording starts, make the
settings according to your preferences beforehand.
NOTICE
• If a previously recorded Song already exists, the [PLAY] button is lit. Recording another Song while the [PLAY] button is lit deletes the previously recorded Song.
• After recording, be sure to turn off the power using [ ] (Standby/On). Note that if the power is turned off abruptly (for example, if the adaptor is disconnected;
page 17), the recorded Song data will be erased.
1
Press [REC].Play the keyboard.
• The instrument can record up to 60 KB (approximately 7,000 notes). When the amount of recording exceeds the capacity, recording will stop automatically, but the
performance up to that point is stored.
• You can use the metronome while recording, but the metronome sound will not be recorded.
234
Press [REC].Press [PLAY].
Pressing [PLAY] also starts recording.
Deleting a Recorded Song
123
16 NP-35, NP-15 Owner’s Manual
Press [REC].
Press [REC] again to stop the deletion.
Press [PLAY].Press [REC].
Press [PLAY] again to
stop playback.
Page 17
Backup Data (Settings Saved on Power Off) and Initializing
Flashes four times
If the instrument malfunctions in some way, try turning the power off, and then
initialize the settings.
Backup Data
The following settings and data are backed up automatically and maintained when the power is turned off using [ ] (Standby/On).
• Metronome Beat/Volume (pages 14, 15)
* The tempo (speed) settings are not backed up.
• Recorded Song data (page 16)
NOTICE
Backups are not executed and the settings along with recorded Song data will be lost if the power is turned off in the following situations.
• Disconnected AC adaptor
• Power failure
• Low or no battery power
Initializing the Settings
• Touch Sensitivity (page 19)
• Tuning (page 21)
Turn the power on while holding down the highest key.
The backup data and recorded Song data will be erased and restored to their factory
defaults.
To restore the default setting, press the corresponding
key indicated by for that setting.
You can make various settings by pressing the buttons and keys. While holding down [METRONOME] (or [DEMO] and [METRONOME]), press
the key corresponding to the specified setting. When you change a setting, an operation confirmation sound (page 21) plays.
18 NP-35, NP-15 Owner’s Manual
Page 19
Items marked with an asterisk are backed up (page 17).
ItemDescription
Reverb Type
Reverb Depth
Damper Resonance
Touch Sensitivity*
Octave Shift
You can select a reverb type.
The optimal reverb type is automatically set when
a Voice is selected. See page 11 for the default
settings for each Voice.
You can adjust the reverb depth.
Setting range: 0 to 10
When turned on, this produces a resonance effect that
simulates the special resonance of the soundboard and
strings of an acoustic piano when its damper pedal is
pressed.
See page 11 for a list of Voices to which this
effect is applied. To use the pedal when you play,
you must connect an appropriate pedal (sold
separately; see page 23). When you press the
connected pedal, the sound will lengthen and
reverberate (SUSTAIN effect); and Damper
Resonance is also applied if that effect is on.
You can specify the degree of touch sensitivity (how the
sound responds to your playing strength).
Touch Sensitivity is not applied to the Organ
Principal, Organ Tutti, Jazz Organ, Harpsichord
8′, and Harpsichord 8′+4′ Voices.
You can shift the pitch of the entire keyboard up or down
in octave steps.
Setting range: –3 to +3
When in Dual mode, you can set this function in
addition to the Octave Shift for Voices 1 and 2
(page 13).
Customizing the Settings
Default
setting
Optimum
setting for
each Voice
Optimum
setting for
each Voice
OnA♯3On
MediumC4Soft: The volume level does not change much when you play the
0F5–G5Lowers the octave
KeysSettings
C3Hall 1: Simulates the natural reverberation of a recital hall.
C♯3Hall 2: Simulates the natural reverberation of a concert hall.
D3Hall 3: Simulates the natural reverberation of a large concert hall.
D♯3Cathedral: Simulates the natural reverberation of a cathedral.
E3Room: Simulates the acoustic reverberation you would hear in a
F3Stage: Simulates the reverb of a live stage environment.
F♯3Off: No effect is applied.
G3Lower by 1
G♯3Use default setting
A3Raise by 1
B3Off
C♯4Medium: This is the standard piano touch response.
D4Hard: The volume level changes very widely from pianissimo to
D♯4Fixed: The volume level does not change at all regardless of
G♯50
A5–B5Raises the octave
room.
keyboard soft or hard.
fortissimo to facilitate dynamic and dramatic expression. You
have to hit the keys hard to produce a loud sound.
whether you play the keyboard soft or hard.
NP-35, NP-15 Owner’s Manual 19
Page 20
Customizing the Settings
D5D4
C#5D#5D#4C#4F
#
5
F5
For details about the functions in , see
“MIDI Reference” (mentioned on page 6 of
this manual) on the website.
Tuning
CH1
Local Control on/off
Control Change off/on
Program Change off/on
Auto Power Off off/on
MIDI Transmit Channel MIDI Receive Channel
To restore the default setting, press the
corresponding key indicated by for
that setting.
Off
CH1
Sound Boost off/on
Operation Confirmation Sounds
off/on
Audio Loopback off/on
Raise by 1
Transpose
Raise by
approx. 0.2 Hz
440.0 Hz
442.0 Hz
Lower by
approx. 0.2 Hz
Lower by 1
Raise by 1
Lower by 1
CH 1+2
ALL
20 NP-35, NP-15 Owner’s Manual
Page 21
Items marked with an asterisk are backed up (page 17).
ItemDescription
Tuning*
Transpose
Audio Loopback
Sound Boost
Auto Power Off*
Operation Confirmation
Sounds*
You can fine-tune the pitch of the entire instrument. This function is useful when
you play this instrument along with other instruments or audio data.
Setting range: 414.8 Hz to 466.8 Hz
The transpose function makes it possible to shift the pitch of the entire keyboard
up or down in semitone intervals. This function makes it easier to match the pitch
of the instrument to the range of a singer or other instruments.
For example, if you set transpose to +5, playing a C key will produce the pitch of
F, so playing in C major sounds like F major.
Setting range: −6 to +6
You can set whether the audio sound input from the [USB TO HOST] terminal is
returned to the computer/smart device or not, along with the performance played
on the instrument.
For example, if you are using DAW software (music production app), turn this
function on to record the audio sound input along with the sound played on the
instrument. To record only the sound played on the instrument, turn this function
off.
When turned on, this function raises the volume and enhances the overall sound
presence.
When turned on, this function automatically turns the power off if no buttons or
keys are operated for approximately 30 minutes.
When the power is off, you can turn the power on while holding down
the lowest key to disable Auto Power Off.
When turned on, this function provides convenient Operation Confirmation
Sounds, which occur when you change a setting using the buttons and keys of
the keyboard.
Customizing the Settings
Default
setting
440.0 HzC1Lower by approx. 0.2 Hz
0F♯1–B1Transposes the pitch down
OnF4Off: Not outputted
OffC5Off: Disabled
OnD5Off: Disabled
OnF5Off: No sound plays.
KeysSettings
C♯1440.0 Hz
D1Raise by approx. 0.2 Hz
D♯1442.0 Hz
C20
C♯2–F♯2Transposes the pitch up
F♯4On: Outputted
C♯5On: Enabled
D♯5On: Enabled
F♯5On: Sound plays.
NP-35, NP-15 Owner’s Manual 21
Page 22
Troubleshooting
Check the following points if you are having trouble with the instrument. If you still cannot find an answer, consult your Yamaha dealer.
ProblemCauseSolution
When the instrument is turned on or off, a
popping sound is temporarily produced.
The instrument does not turn on.The plugs are not properly connected.Securely connect the AC adaptor to the DC IN jack on the instrument and to the
Power suddenly and unexpectedly turns
off.
When pressing [ ] (standby/on), the
power does turn on but then turns off
suddenly and unexpectedly.
Noise is heard from the instrument’s
speakers or headphones.
The overall volume is low, or no sound is
heard.
The sound is distorted.The overall volume is too loud.Turn down the volume (page 7) or use an AC adaptor if you are using batteries
The pitch and/or tone of the piano Voices
in certain ranges do not sound right.
The pedal is not working correctly.The plug of the pedal cord may not be correctly plugged into the
The Foot Pedal or Footswitch seems to
produce the opposite effect.
Noise is heard from the instrument when
using it with a smart device app.
The instrument is receiving electrical power.This is normal and not a malfunction.
The batteries are low or depleted.
The Auto Power Off (page 21) function was activated.Change the Auto Power Off settings.
You are using an AC adaptor other than the one that was
specified.
The batteries are low or depleted.Use either new batteries or fully recharged Ni-MH batteries, or use the specified
The noise may be due to interference caused by the use of a
mobile phone in close proximity to the instrument.
The batteries are low or depleted.Use either new batteries or fully recharged Ni-MH batteries, or use the specified
The volume is set too low.Turn up the volume (page 7).
A pair of headphones, an external device, or a conversion
adaptor is connected to [PHONES/OUTPUT].
Local Control is off.Turn Local Control on. For details, see “MIDI Reference” (mentioned on page 6
The batteries are low or depleted.Use either new batteries or fully recharged Ni-MH batteries, or use the specified
—This is normal and not a malfunction. The piano Voice was designed to reproduce
[SUSTAIN] jack.
The polarity is reversed because the Foot Pedal or Footswitch
was pressed when the power was turned on.
—Activate “Airplane Mode” on your smart device.
AC outlet (page 9). When using batteries, only use either new batteries or fully
recharged Ni-MH batteries (page 9).
Use only the specified AC adaptor (page 23).
AC adaptor (page 23).
Turn off the mobile phone, or use it further away from the instrument.
AC adaptor (page 23).
Disconnect the pair of headphones, external device, or adaptor plug (page 8).
of this manual) on the website.
AC adaptor (page 23).
(page 9).
the original sound of the piano as much as possible. As a result, the harmonics
may be more pronounced in certain tonal ranges, which could make the pitch or
range of the sound seem a bit unusual.
Firmly insert the plug of the pedal cord into the jack (page 8).
Turn off the power, and then turn on the power without pressing the Foot Pedal
or Footswitch (page 8).
22 NP-35, NP-15 Owner’s Manual
Page 23
Specifications
Product NameDigital keyboard
Size/WeightDimensions(W × D × H)1260 mm × 260 mm × 104 mm (49-5/8” × 10-1/4” × 4-1/8”)1052 mm × 260 mm × 104 mm (41-7/16” × 10-1/4” × 4-1/8”)
Control
Interface
VoicesTone Generation Tone Generation TechnologyAWM Stereo Sampling
EffectsTypesReverb6 types
SongsPresetNumber of Preset Songs15 Voice Demo Songs + 10 Piano Songs
FunctionsOverall ControlsMetronomeYes
ConnectivityDC IN12 V
Sound System Amplifiers6 W × 22.5 W × 2
Power Supply AC AdaptorPA-150 or an equivalent recommended by Yamaha
Included AccessoriesOwner’s Manual: this book, AC adaptor: PA-150 or an equivalent
Separately Sold Accessories
(May not be available depending on your area.)
* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. Since specifications, equipment or separately sold
accessories may not be the same in every locale, please check with your Yamaha dealer.
Weight6.0 kg (13 lbs., 4 oz.) (batteries not included)5.2 kg (11 lbs., 7 oz.) (batteries not included)
KeyboardNumber of Keys7661
PanelLanguageEnglish
Piano EffectDamper ResonanceYes
Polyphony (max.)64
PresetNumber of Voices15
FunctionsDualYes
RecordingNumber of Songs1
PHONES/OUTPUTStandard stereo phone jack (6.35mm, PHONES/OUTPUT)
SUSTAINYes (with separately sold Foot Peda l/Footswitch, Half-Damper compatible with FC3A)
USB TO HOSTYes (MIDI/AUDIO)
Speakers(12cm × 8cm) × 2
BatteriesSix “AA” size alkaline (LR6), Ni-MH rechargeable (HR6) or manganese (R6) batteries (sold separately)
Power Consumption6.0 W (When using PA-150 AC adaptor)3.5 W (When using PA-130 AC adaptor)
Auto Power OffYes
TypeBox Type (Graded Soft Touch)Box Type
Touch ResponseHard/Medium/Soft/Fixed
recommended by Yamaha*, Online Member Product Registration,
Music rest
*May not be included depending on your area. Check with your
Yamaha dealer.
Headphones: HPH-50/HPH-100/HPH-150, Foot Pedal: FC3A
(Half-pedal compatibility), Footswitch: FC4A/FC5, AC Adaptor: PA150 or an equivalent recommended by Yamaha, Keyboard Stand:
L-2C, Wireless MIDI adaptor: UD-BT01
NP-35NP-15
(Output: DC 12V, 1.5 A)
PA-130 or an equivalent recommended by Yamaha
(Output: DC 12V, 0.7 A or 1.0 A)
Owner’s Manual: this boo k, AC adaptor: PA-130 or an equivalent
recommended by Yamaha*, Online Memb er Product Registration,
Music rest
*May not be included depending on your area. Check with your
Yamaha dealer.
Headphones: HPH-50/HPH-100/HPH-150, Foot Pedal: FC3A
(Half-pedal compatibility), Footswitch: FC4A/FC5, AC Adaptor: PA130 or an equivalent recomm ended by Yamaha, Keyboard Stand:
L-2C, Wireless MIDI adaptor: UD-BT01
NP-35, NP-15 Owner’s Manual 23
Page 24
Index
A
AC Adaptor ...................................................................................................9
Information for users on collection and disposal of old equipment and used batteries:
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your
national legislation.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and
the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point
of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct
method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the EU Battery Directive for the chemical
involved.
(58-M03 WEEE battery en 01)
NP-35, NP-15 Owner’s Manual 25
Page 26
26 NP-35, NP-15 Owner’s Manual
Page 27
For details of products, please contact your nearest Yamaha representative or
the authorized distributor listed below.