The top half of the above warning is located on the rear of the unit.
IMPORTANT SAFETY INSTRUCTIONS
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
(98-6500)
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured makings identifying the
terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal
of the three pin plug.
• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.
BLUE : NEUTRAL
BROWN : LIVE
(2 wires)
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
• This applies only to products distributed by Yamaha Canada Music Ltd.(polarity)
• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.
IMPORTANT
Please record the serial number of this unit in the space below.
Model:
Serial No.:
The serial number is located on the bottom or rear of the unit.
Retain this Owner's Manual in a safe place for future reference.
Page 3
Thank you for purchasing a Yamaha MS101III Monitor Speaker. The MS101III employs a 4 inch full-range speaker in a
compact bass-reflex style cabinet. Its faithful sound reproduction capabilities make it ideal for home recording and
personal practice. Since a magnetic field-cancelling speaker is used, the MS101
III can be placed next to a television or
video monitor without causing interference, making it the perfect choice for Audio/Video system applications.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
ENGLISH
Power supply/Power cord
• Only use the voltage specified as correct for the device. The required voltage
is printed on the name plate of the device.
• Do not place the power cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy
objects on it, or place it in a position where anyone could walk on, trip over,
or roll anything over it.
Do not open
• Do not open the device or attempt to disassemble the internal parts or
modify them in any way. The device contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Water warning
• Do not expose the device to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings.
•Never insert or remove an electric plug with wet hands.
If you notice any abnormality
• If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the device, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the device inspected
by qualified Yamaha service personnel.
• If this device should be dropped or damaged, immediately turn off the power
switch, disconnect the electric plug from the outlet, and have the device
inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the device or other property. These precautions include, but are not limited to, the following:
Power supply/Power cord
• Remove the electric plug from the outlet when the device is not to be used
for extended periods of time, or during electrical storms.
• When removing the electric plug from the device or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
• Do not expose the device to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
• Do not place the device in an unstable position where it might accidentally
fall over.
Location
• Before moving the device, remove all connected cables.
• When setting up the device, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the
power switch is turned off, electricity is still flowing to the product at the
minimum level. When you are not using the product for a long time, make
sure to unplug the power cord from the wall AC outlet.
• Do not use the device in a confined, poorly-ventilated location. Make sure
that there is adequate space between the device and surrounding walls or
other devices: at least 10 cm at the sides, 10 cm behind and 20 cm above.
Inadequate ventilation can result in overheating, possibly causing damage to
the device(s), or even fire.
Connections
• Before connecting the device to other devices, turn off the power for all
devices. Before turning the power on or off for all devices, set all volume
levels to minimum.
(5)-4
Page 4
Handling caution
• When turning on the AC power in your audio system, always turn on the
device LAST, to avoid speaker damage. When turning the power off, the
device should be turned off FIRST for the same reason.
• Do not insert your fingers or hands in any gaps or openings on the device.
ENGLISH
•Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into
• Do not use the device for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you experience
any hearing loss or ringing in the ears, consult a physician.
• Do not operate the device if the sound is distorting. Prolonged use in this
condition could cause overheating and result in fire.
• Do not rest your weight on the device or place heavy objects on it, and avoid
use excessive force on the buttons, switches or connectors.
any gaps or openings on the device. If this happens, turn off the power
immediately and unplug the power cord from the AC outlet. Then have the
device inspected by qualified Yamaha ser vice personnel.
Even though this speaker system is magnetically shielded, you may need to move the speaker further away from the video monitor, if a nearby video monitor exhibits
any distortion or unnatural color shift.
Interference From Cell Phones
Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device.
Always turn the power off when the device is not in use.
The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualified Yamaha service
personnel about replacing defective components.
• Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation.
• Company names and product names used in this Owner’s Manual are trademarks or registered trademarks of their respective owners.
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance
with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects
on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or
dealer and ask for the correct method of disposal.
(weee_eu)
(5)-4
Page 5
Front Panel / Rear Panel
6
7
8
LINE 1 LINE 2
INPUT
ENGLISH
LINE OUT
POWER/ONLOW
-10 +10
MONITOR SPEAKER MS1013
HIGH
-10 +10
VOLUME
MIN MAX
MIC
INPUT
1234 5
1 POWER/ON switch/indicator
Press this switch to switch the power between on and
off. When the power is turned on, the POWER/ON indicator comes on.
2 LOW control
Tu rn this control clockwise to boost low frequencies
and counterclockwise to reduce them.
3 HIGH control
Tu rn this control clockwise to boost high frequencies
and counterclockwise to reduce them.
4 VOLUME control
Use this control to set the volume level.
5 MIC INPUT
A dynamic type microphone can be connected to this
1/4 inch phone jack.
6 Line 1 Input
The line level output from a CD player or VCR can be
connected to this RCA pin jack.
7 Line 2 Input
Any audio equipment that produces a line level output
can be connected to this 1/4 inch phone jack, i.e., synthesizer, mixer, multitrack recorder, effects unit, etc.
8 Line Out
A multitrack recorder can be connected to this 1/4 inch
phone jack for recording. Input signals from the Mic,
Line 1, and Line 2 inputs are mixed, then output here.
Another MS101III can be connected to this jack for parallel operation. The front panel volume knob doesn’t
effect the volume level of this line out.
5
Page 6
Example Set up
Make sure all your equipment is powered off, then connect the MS101III’s power cable to a suitable AC receptacle. Connect your
other equipment, synthesizer, CD player, etc., to the MS101III, then power on.
Microphones are connected to the MIC INPUTs, a keyboard is connected to the LINE 2 input, and a CD player is connected to the
LINE 1 input allowing you to sing and play along with your favorite songs or even your own songs.
ENGLISH
(Connect to the rear panel LINE INPUTs.)
MS1013MS1013
Microphone
Microphone
Synthesizer
Multitrack recorder
Specifications
● GENERAL SPECIFICATIONS
Type .......................................Bass Reflex Powered Speaker
Frequency Range ..................75 Hz — 18 kHz (LOW and HIGH controls at center)
Max. SPL ...............................97 dB SPL (10 W, 1 m on axis)
Dimensions (W × H × D) ........147 × 214 × 192 mm (5.8 × 8.4 × 7.6 in)
Weight....................................2.5 kg (5 lb 8 oz)
● SPEAKER SECTION
Components ..........................10 cm (4 in), Cone × 1
Sensitivity...............................87 dB SPL (1 W, 1 m on axis)
Nominal Impedance...............4 Ω
● AMP. SECTION
Output Power .........................10 W at 1 kHz, THD = 0.5%, RL = 4 Ω
Frequency Response.............30 Hz — 20 kHz
Input Sensitivity......................MIC: –45 dB / 2 kΩ / Phone Jack
/Impedance............................LINE 1: –10 dB / 10 kΩ / RCA Pin Jack
/Connectors ...........................LINE 2: –10 dB / 10 kΩ / Phone Jack
Hum & Noise.......................... –60 dB *(VOLUME: min, fc = 12.7 kHz, 6dB / oct LPF)
Controls .................................VOLUME
Power Consumption...............30 W
* 0 dB = 0.775 Vrms
Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves
the right to change or modify products or specifications at any time without prior notice. Since specifications,
equipment or options may not be the same in every locale, please check with your Yamaha dealer.
Stereo System
(CD player, etc.)
≤
LOW: –15 dB — +7 dB at 75 Hz
HIGH: –13 dB — +8 dB at 10 kHz
POWER: “On/Off”
6
Page 7
Block Diagram
ENGLISH
Dimensions
POWER/ON LOW
-10 +10
MONITOR SPEAKER MS1013
HIGH
-10 +10
VOLUME
MIN MAX
MIC
INPUT
214 (8.4˝ )
199 (7.8˝ )
147 (5.8˝ )
60 (2.3˝ )
2-M5
192 (7.6˝ )
Unit = mm (inch)
7
Page 8
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.