Yaesu Musen 10944720 Users manual
VX-450 SERIES
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
OPERATING MANUAL
16-Key Version 4-Key Version Non-LCD Version
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VERTEX STANDARD (AUSTRALIA) PTY., LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
CONTENTS
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
Warning! FCC RF Exposure Requirements ............... 2
Controls & Connectors (16-Key Version) ................... 4
Controls & Connectors (4-Key Version) ..................... 5
Controls & Connectors (Non-LCD Version) ............... 6
LCD Icons & Indicators (16- & 4-Key Versions) ....... 7
Before You Begin ........................................................... 8
Battery Pack Installation and Removal ............................... 8
Low Battery Indication ....................................................... 8
Battery Charging ................................................................. 9
Operation ..................................................................... 10
P
reliminary Steps ..................................................... 10
Operation Quick Start .............................................. 10
Advanced Operation ................................................... 14
Programmable Key Functions
Descriptipon of Operating Functions
ARTS (Auto Range Transpond System) ................... 24
DTMF Paging System ................................................. 25
LOCK ............................................................................ 25
...................................... 14
............................ 16
CONGRATULATIONS!
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
You now have at your fingertips a valuable communications tool-a Vertex Standard two-way radio! Rugged, reliable and easy to use, your Vertex Standard radio will keep you in constant touch with your
colleagues for years to come, with negligible maintenance down-time. Please take a few minutes to read
this manual carefully. The information presented here will allow you to derive maximum performance
from your radio, in case questions arise later on.
We’re glad you joined the Vertex Standard team. Call on us anytime, because communications is our
business. Let us help you get your message across.
Notice!: There are no owner-serviceable parts inside the radio. All service jobs must be referred to an
authorized Vertex Standard Service Representative. Consult your Authorized Vertex Standard Dealer for
installation of optional accessories.
IMPORTANT NOTICE FOR NORTH AMERICAN USERS REGARDING 406 MHZ GUARD BAND
The U.S. Coast Guard and National Oceanographic and Atmospheric Administration have requested the
cooperation of the U.S. Federal Communications Commission in preserving the integrity of the protected
frequency range 406.0 to 406.1 MHz, which is reserved for use by distress beacons. Do not attempt to
program this apparatus, under any circumstances, for operation in the frequency range 406.0 - 406.1
MHz if the apparatus is to be used in or near North America.
Warning - Frequency band 406 - 406.1 MHz is reserved for use ONLY as a distress beacon by the
US Coast Guard and NOAA. Under no circumstance should this frequency band be part of the
preprogrammed operating frequencies of this radio.
VX-450 SERIES OPERATING MANUAL
1
WARNING! FCC RF EXPOSURE REQUIREMENTS
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
2001
This Radio has been tested and complies with the Federal Communications Commission (FCC) RF exposure
limits for Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and Guidelines:
FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency Radiation.
FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromagnetic Fields.
ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Fre-
quency Electromagnetic Fields, 3 kHz to 300 GHz.
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Elec-
tromagnetic Fields - RF and Microwave.
WARNING:
This radio generates RF electromagnetic energy during transmit mode. This radio is designed for and
classified as Occupational Use Only, meaning it must be used only during the course of employment by
individuals aware of the hazards, and the ways to minimize such hazards. This radio is not intended for
use by the General Population in an uncontrolled environment.
CAUTION:
To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines:
This radio is NOT approved for use by the general population in an uncontrolled exposure environ-
ment. This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control his or her RF exposure conditions.
When transmitting, hold the radio in a vertical position with its microphone 2 inches (5 cm) away from
your mouth and keep the antenna at least 2 inches (5 cm) away from your head and body.
2
VX-450 SERIES OPERATING MANUAL
WARNING! RF EXPOSURE REQUIREMENTS
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
The radio must be used with a maximum operating duty cycle not exceeding 50%, in typical Push-to-
Talk configurations.
DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more
than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded.
The radio is transmitting when the red LED on the top of the radio is illuminated. You can cause the
radio to transmit by pressing the P-T-T button.
SAR compliance for body-worn use was only demonstrated for the specific belt-clip Part Number
(CLIP-450). Other body-worn accessories or configurations may NOT comply with the FCC RF exposure requirements and should be avoided.
DO NOT transmit when the radio is used in Body Worn configuration with the following accessory:
belt-clip.
It must be used ONLY for (1) there is 4 cm distance from the body during transmitting, (2) monitoring
purposes, using the speaker only and (3) for carrying purposes.
Always use Vertex Standard authorized accessories.
The information listed above provides the user with the information needed to make him or her aware
of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of
this radio.
Electromagnetic Interference/Compatibility
During transmissions, this radio generates RF energy that can possibly cause interference with other
devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
Do not operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, health care facilities, aircraft, and blasting sites.
VX-450 SERIES OPERATING MANUAL
3
CONTROLS & CONNECTORS (16-KEY VERSION
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
)
VOL/PWR Knob
CH (Channel) Selector
Antenna Jack
TOP SEL Key
LCD (Liquid Crystal Display
PTT Switch
SIDE-1 Button
SIDE-2 Button
4
LED Indicator
Steady Red:
Transmitting in progress
Blinking Green:
Busy Channel
Steady Green:
Tone Squelch in defeated condition
Dealer Programmed Color
Emergency, 5-Tone Decoded, or
)
Battery Pack Latch16-Button DTMF Keypad
Microphone
Speaker
2-Tone Decoded
: one of “Flashing in white,”
“Continuation changes in
sequential colors,” or “toggling the two colors.”
:
MIC/SP Jack
(
External MIC/SP
)
VX-450 SERIES OPERATING MANUAL
CONTROLS & CONNECTORS (4-KEY VERSION
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
)
VOL/PWR Knob
CH (Channel) Selector
Antenna Jack
TOP SEL Key
LCD (Liquid Crystal Display
PTT Switch
SIDE-1 Button
SIDE-2 Button
VX-450 SERIES OPERATING MANUAL
LED Indicator
Steady Red:
Transmitting in progress
Blinking Green:
Busy Channel
Steady Green:
Tone Squelch in defeated condition
Dealer Programmed Color
Emergency, 5-Tone Decoded, or
)
Battery Pack Latch4-Button Programmable Key
Microphone
Speaker
2-Tone Decoded
: one of “Flashing in white,”
“Continuation changes in
sequential colors,” or “toggling the two colors.”
:
MIC/SP Jack
(
External MIC/SP
)
5
CONTROLS & CONNECTORS (NON-LCD VERSION
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
)
VOL/PWR Knob
CH (Channel) Selector
Antenna Jack
TOP SEL Key
PTT Switch
SIDE-1 Button
SIDE-2 Button
6
LED Indicator
Speaker Microphone
Battery Pack Latch
VX-450 SERIES OPERATING MANUAL
Steady Red:
Transmitting in progress
Blinking Green:
Busy Channel
Steady Green:
Tone Squelch in defeated condition
Dealer Programmed Color
Emergency, 5-Tone Decoded, or
2-Tone Decoded
: one of “Flashing in white,”
“Continuation changes in
sequential colors,” or “toggling the two colors.”
:
MIC/SP Jack
(
External MIC/SP
)
LCD ICONS & INDICATORS (16-KEY & 4-KEY VERSIONS
FCC ID: K6610944720 / IC: 511B-10944720
Vertex Standard Co.,Ltd.
FCC ID: K6610944720 / IC: 511B-10944720
: “Priority Scan” is activated
“DUAL WATCH” is activated
“Audio Compander” is activated
Low Transmit Power Mode On
Option SW (Key Function)
is activated
: “Scan” is activated
)
“CALL” Indicator
Receiver Monitor
“Talk-Around” is enabled
“Voice Message” is received
Battery Indicator
Priority Channel
Zone Number
RSSI Indicator (four steps)
Encryption is activated
VX-450 SERIES OPERATING MANUAL
“Zone Scan” is enabled
12 Character Alpha-numeric Display
7
Loading...