Yada YD-V9 User Manual

YD-V9

w w w . l e t s y a d a . c o m

speakerphone

with built-in 12V car charger

v1.0

User Manual

Thank you for purchasing the latest Yada wireless technology product from Winplus. We hope you will
enjoy all features and benefits offered by the YD-V9 Speakerphone. These features and benefits were
designed with the goal of making wireless communication more convenient for the user.

Winplus USA

820 South Wanamaker Avenue, Ontario, CA 91761

[e-mail]
www.winplususa.com

Winplus Europe

Unit 4, Two Counties Estate, Falconer Road,
Haverhill, Suffolk CB9 7XZ, U.K.

[e-mail]
www.winplus.net

Winplus Asia

Suites 6-11, 7th Floor, Corporation Park,
11 On Lai Street, Shatin, N.T., Hong Kong

[e-mail]
www.winplus.net

Winplus Australia

Unit 2, 991 Mountain Hwy Boronia,
Victoria, Australia, 3155

[e-mail]
www.winplus.com.au

Winplus New Zealand

Griffiths Equipment

22-24 Olive Road, Penrose, Auckland, New Zealand

web@griffiths.co.nz
www.types.co.nz

Thank You

1

Contents

1 SPECIFICATIONS

2 DISCLAIMER

3 WARRANTY / LIABILITIES

4 PACKAGE CONTENT

5 INSTALLATIONS

6 OPERATIONS

7 BUTTON FUNCTIONS AND OPERATION

8 CARE AND MAINTENANCE

9 TROUBLE SHOOTING

10 CUSTOMER SERVICE / CONTACT US

11 FCC / ICC

Specifications

- Bluetooth® Spec.: v2.1 + EDR

- Weight: 48g

- Profiles Support: Headset & Handsfree

- Operating Range: 10 Meters

- Operation Voltage: 12V, 100mA

- Noise / Echo Reduction: CVC Noise & Echo Reduction

- Volume Control level: Wheel Control

- Operating Temperature: -10ºC to 45ºC

- Storage Temperature: -20ºC to 60ºC

2

• Distracted driving is dangerous. Always use the Bluetooth®
Device in a manner that does not reduce your attention
and ability to drive carefully and safely.

• Adhere to all applicable traffic laws and motor vehicle
regulations applicable to the device.

• Consult local laws and regulations for any restrictions on
installation or use.

• Do not install on or near an airbag. Such installation
could interfere with airbag deployment or could cause the
product or another object to become a projectile, which
could result in serious personal injury to occupants.

• Ensure the product location will not obstruct your vision
while driving.

• Observe all signs that require an electrical device or
RF radio product to be switched off in the designated
areas. These could include hospitals, blasting areas, and
potentially explosive atmospheres.

• Turn off your device prior to boarding an aircraft.
Do not use your device in an aircraft.

• Never allow children to play with the device. Small parts
may be a choking hazard.

Disclaimer

Warranty / Liabilities

WINPLUS NORTH AMERICA

LIMITED WARRANTY

Winplus North America warrants, to the original purchaser,
that its products are free from defects in material and
workmanship for 1 year from the date of original purchase.
Where permitted by law, Winplus North America’s liability shall
be limited to that set forth in this limited express warranty.
This limited express warranty shall be the exclusive remedy
of the purchaser and Winplus North America makes no other
warranty of any kind aside from the limited express warranty
stated above.

NOTE: Warranty only applies for North American customers
or purchases made in the North America.

CONDITIONS OF WARRANTY

If during the 1 year warranty period your new product is
found to be defective, Winplus North America will repair such
defect, or replace the product, without charge for parts or
labor subject to the following conditions:

1. All repairs must be performed by Winplus North America.

2. All warranty claims must be accompanied by a copy of the
sales receipt or bill of sale.

3. The equipment must not have been altered or damaged
through negligence, accident, improper operation, or
failure to follow the product instructions for installation,
use, or care.

3

4. The replacement of parts is excluded from the warranty
when replacement is necessary due to normal wear and
tear.

5. Repair or replacement parts supplied by Winplus North
America under this warranty are protected only for the
unexpired portion of the original warranty.

6. This is a “repair or replace” warranty only, and does not
cover the costs incurred for the installation, removal or
reinstallation of the product, or damage to any mobile
phone device or vehicle.

OWNER’S RESPONSIBILITIES:

Winplus North America will make every effort to provide
warranty service within a reasonable period of time. SHOULD
YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED
OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING
SERVICE, PLEASE CALL TOLL FREE 1.866.294.9244
DURING REGULAR BUSINESS HOURS MONDAY THROUGH
FRIDAY 9:00 AM TO 5:00PM.

NOTE: Toll Free # is for North America Customers ONLY. See
Customer service section for customer contact numbers for
other regions/offices.

In order to provide you with the proper warranty service, we
request that you adhere to the following procedure:

1. Include a copy of your sales receipt or bill of sale with your
unit when it is returned for warranty service.

2. If it is necessary to return your product for service, please
return it securely packed, preferably in the original shipping
box, and freight and insurance prepaid to the following
address:

ATTN: CUSTOMER CARE PRODUCTS RETURNS
820 South Wanamaker Ave.
Ontario, CA 91761

3. Please include a detailed explanation of the problem you
are having.

4. If your product is found by Winplus North America to have
a defect in material or workmanship, within the warranty
period, it will be repaired or replaced at no charge and
returned to you prepaid.

Winplus North America makes no other warranty of any kind
aside from the limited express warranty stated herein.

DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY
OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET
FORTH HEREIN, NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, IS MADE AS TO THE YD-V9
SPEAKERPHONE. EXCEPT AS EXPRESSLY SET FORTH
HEREIN, WINPLUS NORTH AMERICA AND/OR ITS
AFFILIATES EXPRESSLY DISCLAIMS, WITHOUT LIMITATION,
ANY STATUTORY WARRANTIES AND ALL IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.

4

Winplus North America and/or its affiliates are not responsible
for a user’s intended or actual use of the YD-V9 Speakerphone.
In no event shall Winplus North America and/or its affiliates
have any liability for any losses (whether direct or indirect,
in contract, tort or otherwise) incurred in connection with the
YD-V9 Speakerphone. Neither shall Winplus North America
and/or its affiliates have any liability for any decision, action
or inaction taken by any person in reliance on the YD­V9 Speakerphone, or for any delays, inaccuracies and/or
errors in connection with the YD-V9 Speakerphone and its
functioning.

Winplus North America and/or its affiliates shall have no
responsibility or liability for damage and/or injury resulting from
accidents while user is utilizing the YD-V9 Speakerphone; and
Winplus North America and/or its affiliates, the manufacturer,
distributor and seller shall not be liable for any injury, loss or
damage, incidental or consequential, arising out of the use or
intended use of the product.

WINPLUS EUROPE

LIMITED WARRANTY

Winplus warrants, to the original purchaser, that its products
are free from defects in material and workmanship for 12
months from the date of original purchase. Where permitted
by law, Winplus liability shall be limited to that set forth in this
limited express warranty. This limited express warranty shall
be the exclusive remedy of the purchaser and Winplus makes
no other warranty of any kind aside from the limited express
warranty stated above.

OWNER’S RESPONSIBILITIES:

In order to provide you with the proper warranty service, we
request that you adhere to the following procedure:

1. Include a copy of your sales receipt or bill of sale with your
unit when it is returned for warranty service.

2. If it is necessary to return your product for service, please
return it securely packed, preferably in the original shipping
box, and freight and insurance prepaid to the following
address:

ATTN: WINPLUS BLUETOOTH PRODUCTS RETURNS
Unit 4, Two Counties Estate, Falconer Road,
Haverhill, Suffolk CB9 7XZ, UK

3. Please include a detailed explanation of the problem you
are having.

4. If your product is found by Winplus to have a defect in
material or workmanship, within the warranty period, it will
be repaired or replaced at no charge and returned to you
prepaid.

Winplus makes no other warranty of any kind aside from the
limited express warranty stated herein.

WINPLUS AUSTRALIA / HONG KONG

LIMITED WARRANTY

This Yada product is warranted against faulty workmanship for
a period of 2 years from date of purchase. Liability is limited
to replacement of the product and claims for associated or
consequential loss or damage will not be accepted. Warranty
is void and does not apply if the product has been damaged
or rendered faulty by accident, abuse, misuse, incorrect
application or if the product has been modified or tampered
with. Proof of purchase is required to validate warranty
claims. If this product is faulty, simply return it to the place
of purchase with your receipt for a replacement product. No
refunds or credits will be issued. Replacement is limited to a
Yada product of the same or similar model.

5

Package Content

Speakerphone

Installations

IMPORTANT: Before installing the YD-V9, make sure:

• Vehicle is parked in a safe area

• Car engine is OFF

• Emergency brake is set

1. Plug the YD-V9 directly to your vehicle’s 12V power port.

2. Make sure the speakerphone is directed towards the
user.

NOTE:

• For better performance, make sure
that the speakerphone is not
obstructed

• Use the 12V power port near the user

• The device will connect to the
last paired devices every time it is
powered ON

Operations

IMPORTANT: Directly plug the YD-V9 to your vehicle’s
12V power port.
NOTE: The device is not equipped with a built-in battery
therefore will not function if not plugged directly to a 12V
Power Port.

A. Power ON/OFF

To turn the YD-V9 ON:

• Verify that the device is plugged into a 12V power port

• Press and hold red button for about 3-5 seconds

• Release until the blue LED flashes

To turn the YD-V9 OFF:

• Press and hold red button for about 3-5 seconds

• Release until the LED flash red

NOTE: Always turn the speakerphone OFF before leaving
the vehicle.

microphone

adjustable speaker

volume control

power indicator

red button

green button

6

B. Pairing/Linking

Pairing Bluetooth® enabled mobile phones with the YD-V9
Speakerphone authorizes hands-free communication. This
step only needs to be performed once.
Before Pairing the YD-V9 Speakerphone:

• Ensure the YD-V9 is plugged directly to a 12V power port

• Ensure the YD-V9 is OFF

•

Ensure the Bluetooth® on your mobile phone is activated

Follow the steps below to pair your YD-V9 with your mobile
phone:

• Press and hold

red button for 7-8 seconds

• Release the button until the LED indicator alternately blinks
red and blue

NOTE: YD-V9 is now in pairing mode

• Activate the Bluetooth

®

settings of your mobile phone
NOTE: The following steps are general procedure; to access
Bluetooth® Menu for you mobile phone, please refer to your
phone user manual.

• Select SET-UP or CONNECT from your mobile phone

menu

• Find and select OPTION to discover Bluetooth

®

devices;

establishing a connection may take several minutes

• If found, phone display should indicate

YD-V9 device was

detected or Select “YD-V9” from the list

• Phone should give you a prompt asking if you want to pair

the device

• Select OK or ACCEPT and wait for prompt to enter passkey

or PIN

• Enter the code

0000

• Select “OK” to pair and connect the YD-V9 and the

handset

NOTE: If the YD-V9 and mobile handset did not successfully
pair, follow the steps below to retry pairing:

• Turn the YD-V9 OFF

•

Turn OFF all other Bluetooth® devices before starting the
pairing process

• Repeat the pairing instructions from the beginning

NOTE:

• After 2 minutes, the YD-V9 will exit paring mode
automatically if it can’t connect with the mobile phone

7

FUNCTION

THE STATUS OF

THE CAR KIT

OPERATION

Answer Call Ringing

Press Green button once

Reject Call Ringing

Press Red button once

Cancel
Calling

Calling

Press Red button once

End Call During a Call

Press Red button once

Adjust

Volume

During a Call

Adjust Volume Wheel

Transfer Call During a Call

Press Green button once to transfer

the call to cell phone, Press once

again to transfer the call to the car kit

Remark: Maybe some cell phones have

to operate on the cell phone to transfer the

call to the car kit

Microphone

Mute

During a Call

Press and hold Green button for

about 2 seconds, and then release it
untill hearing indication tone. When the
microphone is mute, the car kit sounds

indication tone every 5 seconds

Cancel Mute During a Call

Press and hold Green button for

about 2 seconds, and then release it untill

hearing indication tone

Redial Last

Call

Standby Mode

(Connected with

Bluetooth® device)

Press and hold Green button for

about 2 seconds, then release

Voice Dial

Standby Mode

(Connected with

Bluetooth® device)

Press Green button once

Button Functions And Operation

Care And Maintenance

• Turn OFF the YD-V9 when not in use

• Do not let the YD-V9 be in contact with liquid as it is
not waterproof. Avoid putting it in places where there is
excessive moisture and humidity

• Do not expose the YD-V9 to direct sunlight nor place
in areas with high temperature, as it may result in an
explosion

• If the YD-V9 is not in use for a prolonged period, store in a
cool, dry place, free from moisture, humidity and dust

• Do not use abrasive cleaning solvents to clean the YD-V9

• Do not expose the YD-V9 to contact with sharp objects as
this will cause scratching and damage

• Do not stick anything inside the YD-V9 as this may damage
internal components

• Do not attempt to disassemble the YD-V9, as it does not
contain serviceable components

• Do not disassemble the device as it may expose you to
dangerous voltages or other risks. Incorrect reassembly
can cause electric shock when the YD-V9 is subsequently
used

• Avoid charging the YD-V9 in extremely high or low
temperatures

8

If you are unable to hear the person on the other line clearly,
do the following steps while conversation is in ongoing:

• Adjust the volume to maximum in your YD-V9 or

• Request the person on the other line to adjust his/her
mobile phone volume to maximum

If there is a strong echo resounding from the person on the
other line:

• Transfer the call to mobile phone

• If echo disappeared, transfer the call again from mobile
phone to YD-V9 and lower the loudspeaker volume until
echo is eliminated

• If the echo still remains, this means the echo is generated
by the network service provider or mobile phone itself

If the speaker volume of the YD-V9 is too low or too high and
seems impossible to adjust it:

• Adjust the volume directly on the phone

• Fine tune it using the volume control of the YD-V9

If you are unable to connect your speakerphone and mobile
handset, please try the following:

• Ensure the YD-V9 is paired with your mobile handset

• Ensure your mobile handset’s Bluetooth

®

feature is
activated. Please refer to your mobile handset user guide
for specific instructions

• Ensure the YD-V9 is within a maximum of 10 meters of
your mobile handset(s) or Bluetooth® enabled device
and there are no obstructions, such as wall or other
electronic devices, in between as it may cause interference
transmission

• If all the above steps do not resolve your problem, please
unplug the speakerphone from the 12V power port and
please follow the pairing process

The YD-V9 Speakerphone is compliant with and adopts the
Bluetooth® Specification V2.1 + EDR. However, interoperability
between the device and other Bluetooth®-enabled products
is not guaranteed because it depends on compatibility. For
more information on the compatibility between the device
and other Bluetooth®-enabled products, please contact
Customer Service.

Customer Service / Contact Us

For questions or issues regarding the product, please visit

www.letsyada.com or contact Winplus in your area/region to

speak to our customer service representative:

Winplus USA Tel.: [phone]
Tel.:

909-752-3074
Winplus Europe Tel.: [phone]
Winplus Australia Tel.: [phone]
Winplus New Zealand Tel.: [phone]
Winplus Asia Tel.: [phone]

You can also contact us online by visiting www.winplus.com
for more information about the product.

IF YOU ARE EXPERIENCING ANY ISSUES WITH THE
PRODUCT DURING OPERATION, DO NOT RETURN THE
PRODUCT TO THE STORE. CONTACT WINPLUS DIRECTLY
FOR INSTRUCTIONS ON HOW TO RETURN/EXCHANGE THE
PRODUCT.

Troubleshooting

9

FCC / ICC

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and
receiver

• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician
for help

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.

FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate this equipment.

IMPORTANT NOTE
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF
exposure compliance.

This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

IC Statement

Operation is subject to the following two conditions:

1. This device may not cause interference and

2. This device must accept any interference, including
interference that may cause undesired operation of the
device.

This device has been designed to operate with an antenna
having a maximum gain of 0 dBi. Antenna having a higher
gain is strictly prohibited per regulations of Industry Canada.
The required antenna impedance is 50 ohms.

IMPORTANT NOTE:
IC Radiation Exposure Statements:

This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure
compliance.

This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

10

ML-50066

NORTH AMERICA

EUROPE

AUSTRALIA

NEW ZEALAND

ASIA

820 South Wanamaker Avenue,
Ontario, CA 91761

Unit 4, Two Counties Estate, Falconer Road,
Haverhill, Suffolk CB9 7XZ, U.K.

Unit 2, 991 Mountain Hwy Boronia,
Victoria, Australia, 3155

22-24 Olive Road, Penrose,
Auckland, New Zealand

Suites 6-11, 7th Floor, Corporation Park,
11 On Lai Street, Shatin, N.T., Hong Kong

Tel: [phone]
Fax: [phone]

Tel: [phone]
Fax: [phone]

Tel: [phone]
Fax: [phone]

Tel: [phone]
Fax: [phone]

Tel: [phone]
Fax: [phone]

© 2010 Winplus North America Inc. All Rights Reserved. Winplus, the logo design, and Yada are trademarks or

registered trademarks of Winplus North America Inc. The Bluetooth® word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by Winplus North America Inc. is under license.