Yaasa Adjustable Bed Owner's Manual
The Yaasa
Adjustable Bed
Owner’s Manual
02 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 03YAASA ADJUSTABLE BED OWNER‘S MANUAL //
Safety
01
IMPORTANT SAFETY INSTRUCTIONS
This manual is designed according to UL 962 Standard for Household and Commercial Furnishing and contains safety instructions. The operator of the product is obligated to read this
manual. The individual persons themselves are responsible to observe the safety instructions.
Furthermore, important notes about accident prevention can be found here.
GENERAL SAFETY INFORMATION
Generally, the following safety regulations and obligations are valid when handling the system:
▪ The system may only be operated in proper working condition.
▪ It is forbidden to remove, change, bridge, or bypass any protection, safety or monitoring
devices.
▪
It is forbidden to reconstruct or modify the system without written approval by the supplier.
▪ Only genuine spare parts may be used for repair.
▪ All repair work must be performed by authorized personnel only.
▪ All protection, safety and monitoring devices have to be checked regularly by the oper-
ator and maintained
▪ The national employee protection regulations and the national safety and accident pre-
vention regulations are valid.
▪ Only perform hardware changes in de-energized state (it does not matter if it is the power
cable, remote control or other components).
▪ Always make sure no children, animals are in the proximity of the bed when operating it.
▪ Ensure no person or object is in the way of moving parts (e.g. night stand or open window).
▪ Do not sit on any of the moving parts when operating the bed (laying on the bed flat is ok).
CONTENT
01. SAFETY .......................................................................................................................................................................... 03
02. INTRODUCTION ...................................................................................................................................................... 12
03. BOX CONTENTS ..................................................................................................................................................... 14
04. ASSEMBLY ..................................................................................................................................................................16
05. DISASSEMBLY AND TRANSPORTATION .............................................................................................26
06. OPERATION ................................................................................................................................................................28
07. CLEANING AND MAINTENANCE ............................................................................................................... 30
08. UNUSUAL BEHAVIOR AND SOLUTIONS ............................................................................................31
09. TECHNICAL DATA ................................................................................................................................................. 34
10. FINAL DISPOSAL ................................................................................................................................................... 34
COPYRIGHT®
This original documentation is protected by copyright. All rights, especially the right of reproduction and distribution as well as translation, are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any form, without prior written
permission of Yaasa Studios Inc. All violations involving copyright may result in legal action.
2017 Yaasa Studios Inc.
04 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 05YAASA ADJUSTABLE BED OWNER‘S MANUAL //
06 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 07YAASA ADJUSTABLE BED OWNER‘S MANUAL //
INTENDED USE
The Yaasa Adjustable Bed may solely be used for the intended use according to this documentation.
The Yaasa Adjustable Bed is an electrically controlled bed base. It is operated by a remote control.
Additionally, it contains one USB module on each side to charge mobile devices such as smart
phones or tablet PCs. It is designed for indoor use only. Outdoor use is forbidden. This bed is not
suitable for potentially explosive atmosphere.
HOSPITAL / MEDICAL DISCLAIMER:
This bed is NOT designed for hospital or medical use (in-home or commercial) and is NOT
designed to meet medical or hospital standards. Do not use this bed with TENT TYPE oxygen
therapy equipment or use near explosive gases.
This bed may only be used with a suitable mattress. All used mattresses shall comply with the
Federal Register 16 CFR Part 1633. Check with your mattress manufacturer if it is compatible
with electrically adjustable beds. This bed is not suitable for water bed mattresses. It is not intended to be used without a mattress.
This system is intended to be assembled and used by adults only. It is not designed for children
or animals.
The recommended weight limit (including mattress) is 700 lbs evenly distributed across the bed.
The head and foot sections of this product are not designed to individually support or lift this
amount of weight. For optimal performance, consumers should enter and exit the adjustable base
only when it is in flat (horizontal) position. Avoid placing entire weight on head or foot section, especially when in elevated position. Do not stand on the base at any time. Note: Exceeding the recommended weight restrictions could damage the product and void the warranty.
Any usage other than described in this manual is only allowed after written consent by
Yaasa Studios.
Unintended use or improper operation can result in personal injury and/or damage to the system.
Furthermore, liability and warranty claims become void in case of unintended use.
REASONABLY FORESEEABLE MISUSE
The Yaasa Adjustable Bed shall not be used in the following way:
▪ Do not use the bed as a climbing aid.
▪ Do not jump on the bed.
▪ Do not let children or animals climb on or under the bed.
▪ Do not use the bed without a mattress.
TARGET GROUP AND PREVIOUS KNOWLEDGE
This manual is addressed to adult s. The following conditions are necessary:
▪ Basic technical knowledge.
▪ Ability to lift t he components.
▪ Reading an d understanding this manual.
SIGNAL WORDS USED IN SAFETY INSTRUCTIONS
DANGER
Imminent danger to life of persons
A safety notice containing the signal word DANGER indicates an imminent danger for life and
limb of persons!
Failure to observe these safety instructions can result in death or serious damage.
WARNING
Danger of injury to persons (serious injury) and in addition possible material damage.
A safety notice with the signal word WARNING indicates a dangerous situation which could have
consequences for the health of persons!
Non-compliance with these safety instructions can result in serious injury.
NOTICE
This icon with the word NOTICE indicates the availability of supporting information for installation,
operation and maintenance. Non-observation of these references may lead to property damage.
CAUTION
Danger of personal injury (minor injuries) and in addition possible material damage
A safety instruction with the signal word CAUTION indicates a potentially dangerous situation.
Non-compliance with these safety instructions can result in minor injuries.
▪ Do not overload the bed (max. 700 lbs evenly distributed).
▪ Do not continuously move parts of the bed up and down.
NOTICE
The bed is not designed for continuous operation.
Wait one minute after each complete driving cycle.
08 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 09YAASA ADJUSTABLE BED OWNER‘S MANUAL //
RESIDUAL RISKS
Although the highest diligence was taken during construction and assembly of the system and
all safety relevant issues were observed, some risks that were evaluated in a risk analysis may remain. In this chapter, all residual risks and warnings which result from the risk analysis are listed.
Read all instructions before using this bed.
DANGER
To reduce the risk of electric shock:
Always unplug this bed from the electrical outlet before cleaning.
WARNING
Do not immerse any connection cables or any parts of the bed in liquid.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this bed is used by, or near children, invalids or disabled
persons.
3. Use this bed only for its intended use as described in these instructions. Do not use attachments not recommended by manufacturer.
4. Never operate this bed if it or any parts has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the bed for examination and repair or replace it.
5. Keep cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. To disconnect, turn all controls to the off position, then remove plug from outlet.
10. Risk of injury – keep children away from extended foot support (or other similar parts).
11.
Risk of electric shock – connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
WARNING
This bed can withstand maximum evenly distributed load of 700 lbs. Do not overload the system under any circumstances. Neither foot or head rest can withstand the maximum load alone.
WARNING
Sitting on moving parts is forbidden as it may lead to property damage and injury. It is ok to lay
on the bed during movement.
CAUTION
If children are present, child lock must be activated.
DANGER
It is forbidden to crawl under the bed. Moving parts can lead to serious injury or death.
DANGER
Never reach under the bed during operation. Moving parts may lead to serious injury or death.
CAUTION
It is forbidden to store foreign objects under the bed.
WARNING
Make sure no foreign objects (e.g. nightstand or window) are in the way when operating the bed.
CAUTION
Do not grab the side rails by moving parts. Always grab them by the rigid frame.
CAUTION
Do not tilt the assembled bed upright to move it.
WARNING
Disconnect the power supply before connecting or disconnecting any components. Otherwise
electrical hazards might arise.
10 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 11YAASA ADJUSTABLE BED OWNER‘S MANUAL //
DANGER
Do not open any electrical parts under any circumstances. This could lead to serious injury or death.
DANGER
Do not modify any components of the bed.
DANGER
Do not operate the bed in a potentially explosive atmosphere.
WARNING
To disconnect bring the bed into the flat position, then remove plug from outlet.
WARNING
Risk of injury: keep children away from the moving platforms.
WARNING
Risk of electric shock: connect the power plug to a properly grounded outlet only. See grounding instructions.
SAVE THESE INSTRUCTIONS
ELECTRICAL GROUNDING
GROUNDING INSTRUCTIONS
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the
plug illustrated in sketch A (see below). A temporary adapter that looks like the adapter illustrated
in sketches B and C can be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The rigid ear,
lug, or the like extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by
a metal screw.
FCC statement:
Radio Frequency is 2.4 GHz
FCC Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
Loading...