CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING : TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE.
Radio Approvals: FCC Part 15.249, FCC Part 15 B,
RSS-210 (Canada), EN 300 440 (Europe), EN 301.489
(Europe), Japan Radio 2.4GHz Band (Japan), MIC ARIB
STD-T66 (Japan)
Important Safety Instructions
The CE Declaration of Conformity & California 65 Test
Report can be obtained at
http://www.xviveaudio.com/productInfo.asp?id=354
01
THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Warning: Changes or modifcations not expressly
approved in writing by Xvive may void the users
authority to operate this equipment.
RF Exposure Statement: This transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
CERTIFICATION
02
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with Canadian
ICES-003.
03
IMPORTANT SAFETY INSTRUCTIONS
PLEASE THESE INSTRUCTIONS
IN A SAFE PLACE
WARNING: BEFORE USING YOUR XVIVE U2
1.Observe all instructions carefully in the U2 manual.
2.Do not to perform service operations beyond those
described in the U2 Manual. Services required when
the apparatus has been damaged in any way, such as:
/LTXLGKDVEHHQVSLOOHGRUREMHFWVKDYHIDOOHQLQWRWKH
DSSDUDWXV7KHXQLWKDVEHHQH[SRVHGWRUDLQRU
PRLVWXUH7KHXQLWGRHVQRWRSHUDWHQRUPDOO\RU
FKDQJHVLQSHUIRUPDQFHLQDVLJQLILFDQWZD\7KHXQLW
is dropped or the enclosure is damaged
3.Do not place near heat sources, such as radiators,
heat registers, or appliances which produce heat.
4.Guard against objects or liquids entering the device.
Do not use or place unit near water.
5.Clean only with a damp cloth.
6.Only use attachments/accessories specified by the
manufacturer.
DIGITAL WIRELESS SYSTEM,
CAREFULLY READ THE OPERATING
INSTRUCTIONS.
04