Model:
XPB700WDR
B/W 700TVL Colour 580TVL,
Dynamic Night View, Super WDR,
Smart DNR for Disk Saving & Varifocal
Before you begin
• Please unpack the box carefully and identify that all the parts are present.
• Do not cut the camera cables, this will void the warranty.
• Make sure you use only the recommended power supply. Damage caused to the camera by
incorrect voltage or wiring is not covered by the warranty.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.
•The camera must be positioned so that it will not point directly into the sun (sunrise and
sunset) or any bright light, as this may cause damage to the camera.
Model: XPB700WDR
700 TVL Dynamic Night View,
Super WDR & Smart DNR Camera
Thank you for purchasing this Xvision camera. Before operating this
product, please read this instruction manual carefully.
When in use please do not touch the camera body as it can get very
hot.
When installing the camera, please avoid pointing it directly at
paper or flammable materials.
Please avoid all direct contact with the tempered glass cover to
avoid contamination. If you need to clean the cover use cotton wool
balls dipped in alcohol or glass wipes.
The XPB700WDR camera is designed for high risk applications. It offers
very high resolution images of 580 TVL in Colour mode and 700 TVL in
B/W mode, with a low lux sensitivity of 0.0003 lux. It features Dynamic
Night View, Super WDR, Smart DNR for disk saving and an Auto Iris
Varifocal Lens. It is designed for internal or external use and can be
wall mounted.
1. Safety Precautions
2. Product Description
2
Sony 1/3" CCD Image Sensor, Samsung DSP Chip & Xvision X4 DSP
Software
5.0 to 50.0mm Auto Iris Varifocal lens for 6° to 49° viewing angle for
super sharp images and easy selection of the optimum viewing angle
during installation.
Dynamic Night View technology provides clear images without the
need for IR LEDs down to 0.0003 lux, this is achieved by using a Digital
Slow Shutter, please note due to the way in which this technology
works, whilst it is in operation the frames per second will reduce. The
darker the scene the lower the frames per second, resulting in a non
real time image.
Super WDR technology provides a clear overall picture even when
strong backlight or bright spots are present.
Smart DNR (Digital Noise Reduction) reduces the noise on the image
when viewing in low lux environments (like at night), this reduces the
size of the image when being recorded by a DVR, resulting in a saving
of disk space.
3. Features
4. Contents
Hex Wrench
4x Fixing Screws
4x Wall Plugs
3
XPB700WDR Camera
5. Product Assembly
When attaching
the bracket to the
camera be careful
not to damage
the cable.
4
Figure 1
1. Make a hole in the wall approximately 30mm wide x 40mm deep.
2. Drill 4 holes and insert the wall plugs.
3. Feed the cables into the wall before fixing the camera using the
4 fixing screws
6. Installation
Fixing Holes Guide-
Not shown actual size
5
Figure 2
6
The XPB700WDR is fitted with a Varifocal lens. You can make
adjustments to both the Zoom and Focal Length by following these
easy steps:
STEP 1: Carefully unscrew the camera housing and pull the casing
away.
STEP 2: Connect the Video Output to the monitor or other video device
through a 75 Ohms type coaxial cable.
STEP 3: Once the picture appears on the monitor, make the Zoom
Adjustment by rotating the long screw (NEAR-Anti-clockwise, FAR
Clockwise) until you get the desired view. Next make the Focal
Adjustment by rotating the long screw (TELE-Anticlockwise, WIDE
Clockwise) until you get the desired view (as shown in Figure 3). (If the
long screw does not move turn it Anti-clockwise to unscrew it, this will
loosen it and allow you to make the adjustment, after adjustment
tighten both screws by turning Clockwise, see Figure 4).
7. Lens Adjustment
Figure 3 Figure 4
7
Press this Control
UP, DOWN
LEFT, RIGHT
SETUP (MENU)
Action
Select a new item
Select a menu item
Access a sub menu
8. Camera OSD Control
9. OSD Menu Structure
Push
DOWN
to Setup
menu
LENS Option
● DC ● VIDEO ● MANUAL
EXPOSURE
● SHUTTER ● AGC ● SENS-UP ● RETURN
WHITE BALANCE
● ATW ● MANUAL ● AWC>SET
● OUTDOOR ● INDOOR
BACKLIGHT
● OFF ● WDR ● BLC
DNR
● ON ● OFF
DAY/NIGHT
● COLOUR ● B/W ● AUTO ● RETURN
IMAGE ADJUSTMENT
● FREEZE ● V-REV ● H-REV
● D-ZOOM ● SHARPNESS ● RETURN
SPECIAL
● CAM TITLE ● SYNC ● MOTION
● PRIVACY ● DIS ● COMM ADJ
● LANGUAGE ● RESET ● RETURN
EXIT
SET UP MENU
8
10. SETUP Menu Functions
1 LENS
<Option: DC / VIDEO / MANUAL>
Selects lens type and controls screen brightness.
2 EXPOSURE
<Option: SHUTTER / AGC / SENS-UP / RETURN>
Selects a desired mode.
SHUTTER : Selects either auto or manual shutter.
AGC: The higher the gain level, the brighter the screen -but the
higher the noise.
SENS-UP (Dynamic Night View): When it is night or dark, the camera
automatically detects the light level and maintains a clear picture if
this mode is activated.
3 WHITE BALANCE
<Option: ATW / MANUAL / AWC->SET / OUTDOOR / INDOOR>
Adjusts the screen colour.
ATW : Selects this when the colour temp. is between 1800° ~
10500°K.
INDOOR: Selects this when the colour temp. is between 4500°K ~
8500°K.
OUTDOOR: Selects this when the colour temp. is between 1800°K ~
10500°K. (sodium light inclusion)
AWC->SET: To find the optimal setting for the current luminance
environment, set the point the camera towards white paper and
press the SET button.
MANUAL: Fine-tune White Balance manually.
9
10. SETUP Menu Functions (continued)
4 BACK LIGHT
<Option: OFF / WDR / BLC>
Selects a desired mode.
OFF: Deactivates the WDR function.
WDR (Super WDR): When there are both bright and dark areas at the
same time, this mode makes both areas distinctive.
BLC: Enables a user to directly select a desired area from a picture,
and to view the area more clearly.
5 DNR (Smart DNR)
<Option: ON / OFF>
Reduces the background noise.
ON: Activates DNR so that noise is reduced.
OFF: Deactivates DNR. Noise is not reduced.
6 DAY/NIGHT
<Option: COLOUR / B/W / AUTO / RETURN>
Displays pictures in color or black and white.
COLOUR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
AUTO : The mode is switched to COLOUR in a normal environment,
but switches to B/W mode in a low luminance environment.
7 IMAGE ADJ.
<Option: FREEZE / V-REV / H-REV / D-ZOOM / SHARPNESS / RETURN>
10. SETUP Menu Functions (continued)
FREEZE: You can view still or moving pictures.
V-REV: You can flip the picture vertically on the screen.
H-REV: You can flip the picture horizontally on the screen.
D-ZOOM: You can use a digital zoom of x1~x10.
SHARPNESS: As you increase this value, the picture outline becomes
stronger and clearer. Adjust this value appropriately depending on
the sharpness of the picture.
8 SPECIAL
<Option: CAMTITLE / SYNC / MOTION DET / PRIVACY / DIS / COMM
ADJ / LANGUAGE / RESET / RETURN>
CAMTITLE: Enters a title, the title will appear on the monitor.
SYNC: In areas where the supply is at 60Hz, you can synchronize
the output phase of multiple cameras using the power
synchronization function (Line-Lock) without using a synchronization
signal generator.
- INT: Internal Synchronization Type
- L/L: Power Synchronization Type, Line-Lock
MOTION DET: In a large multi camera system it is easy to miss
small movements, specially when viewing over 9 cameras on one
monitor, the Motion Detection function will display an On Screen
Overlay Message on the cameras output alerting you of movement
being detected.
- SENSITIVITY: You can select up to 8MD areas.
When number is high, motion detection sensitivity is increased to
recognise even small movement.
10
11
10. SETUP Menu Functions (continued)
- AREA MODE: Determines whether to use the MD area
selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is
to be used.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- XPOS: Determines the coordinate of the horizontal axis
for SEL POS.
- FILL->SET: Fills in a selected MD area.
PRIVACY: Hide an area you want to hide on the screen.
DIS: This function lessens any picture movement due to
external factors such as wind.
COMM ADJ.(Communication Adjustment): This function sets up
the camera communication status when controlling the camera
through an external control device.
- CAM ID: Determines the camera's ID No. (0~25)
- BAUD RATE: Selects baud rate.
- UART MODE: You can select NONE, EVEN or ODD for
the parity bits.
- RET PKT: Determines whether to send a command back to the
controller device when a communication control command is sent
to the camera.
- DISP CAM ID: Display camera title on the screen.
LANGUAGE: Selects the menu language.
RESET: Resets the camera settings to the factory defaults.
12
10. SETUP Menu Functions (continued)
9 EXIT
Press the SET button in the EXIT menu to save the current settings
and exit the SET menu.
13
11. Specifications
Model: XPB700WDR
Picture Type: Day/Night
(B/W & Colour)
Image Sensor: Sony 1/3” CCD
DSP: Samsung DSP Chip &
Xvision X4 DSP Software
Resolution: 700 TVL B/W 580TVL Colour
Lens Viewing Angle: 6 to 49°
Infra Red Nightvision: Not sensitive to IR
Minimum Illumination: 0.0003 Lux
Audio: No
Operating Voltage: 12V DC 150mA
Suggested Power Supply: 12V DC 300mA Regulated
Mounting: Wall/Ceiling
Weatherproofing: Yes
Dimensions (ØxD): 85mm x 130mm
14
NOTES
15
NOTES
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Email: info@x-vision.co.uk
Web: www.x-vision.co.uk
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your
local distributor.
LIMITED WARRANTY:
This product is supplied with a limited 3 Year warranty. The
Warranty excludes products that have been misused, (including
accidental damage) and damage caused by normal wear and tear.
In the unlikely event that you encounter a problem with this
product, it should be returned to the place of purchase.
16
Loading...