XVision X17LCD, X19LCD User Manual

Model: X19LCD

Professional 19” LCD CCTV
Monitor with 3D Noise Filter

Model: X17LCD

Professional 17” LCD CCTV
Monitor with 3D Noise Filter

CCTV

Model:

X17LCD/X19LCD

Professional 17”/19” LCD CCTV Monitor
with 3D Noise Filter

Before you begin

Please unpack the box carefully and identify that all the parts are present.

Do not cut the LCD cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the LCD by incorrect
voltage or wiring is not covered by the warranty.

Please bear in mind the following points when choosing a mounting position.

Do not expose the display to humidity, dust, direct sunlight or to extreme weather conditions.

Do not use thinner or other chemical detergents when cleaning. Use a soft cloth to remove dust
or dirt from the display screen.

Avoid storage and use of this display in areas of extreme hot or cold. The display’s operating
temperature range is -10°C to +40°C.

Do not drop or strike the display.

For your own safety, when the display is not in use, remove the AC adapter from the mains.

CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT OPEN BACK COVER.

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRICAL SHOCK.

DO NOT OPEN

!

CAUTION

Thank you for purchasing this Xvision monitor. Before operating this product,
please read this instruction manual carefully.

Make sure that you use only the recommended power supply supplied with
the unit.

When installing the monitor, please make sure that you observe the necessary
safety precautions.

Try to avoid all direct contact with the LCD screen as any scratches or
marks left on the surface could affect the image quality.

The X17LCD and X19LCD feature a 17" and 19” TFT LCD respectively, which
generate 1280 x 1024 pixel (800 TVL) resolution images, making them ideal for
high risk applications. Specially designed for CCTV use, they feature High
Brightness LCD displays with a special noise reduction filter for excellent image
quality and high fidelity speakers for good quality audio. The X17LCD and X19LCD
include VGA, BNC, HDMI, SVHS and Phono inputs for flexible connectivity to
industry standard CCTV equipment and have a built in switch mode power supply
for a flexible operating voltage of 100 to 240V AC and mains interference free
images. The LCD Monitors are designed for Desk mounting as supplied or can be
Wall or Ceiling mounted using an optional bracket (not supplied).

1. Safety Precautions

2. Product Description

S/N Mode Resolution Refresh Rate

1

VGA

720 x 400 70

2

640 x 480

60

3 72
4 75
5

SVGA 800 x 600

60

6 72
7 75
8

XGA

1024 x 768

60

9 70
10 75
11 1280 X 960 60
12 1152 X 864 75
13

SXGA 1280 X 1024

60

14 75

Recommended mode: 1280x1024@60Hz

X17LCD/X19LCD Monitor

Remote

Control

A

BC DEF GHI

1

23

JLK LMN PQR

456

STU XWX YZ-

789

MUTE

POWER

MENU SOURCE

SMART S SMART P

OK

VOL

PRO

GRAM

I

NFO 16:9

D

CDi COLOR

P

/N AUDIO

0

F1

3. Contents

Audio Connection

Lead

Mains Power Lead

VGA Connection

Lead

2.1 VGA INPUT MODES & RESOLUTIONS

4. Installation & Connection

VIDEO INPUT

AUDIO INPUT

VIDEO OUTPUT

LEFT CHANNEL AUDIO OUTPUT

RIGHT CHANNEL AUDIO OUTPUT

LEFT

RIGHT

POWER
SUPPLY

EARPHONE JACK AUDIO HDMI

Connect to PC Connect to DVD/VCR/VCD etc

VGA S-VIDEO VIDEO

OR

AUDIO

VIDEO INPUT

AUDIO INPUT

VIDEO OUTPUT

LEFT CHANNEL AUDIO OUTPUT

RIGHT CHANNEL AUDIO OUTPUT

4.2 PC, DVD/VCR/VCD and POWER CONNECTION

1. Connect the PC and/or DVD/VCR/VCD and power connections to the monitor

as shown below:

4.1 CONNECTIONS FOR CCTV / DVR

1. Remove the cover

on the rear right on the
monitor by lifting the
panel up as shown in
Fig. 1 and 2.

2. Connect the BNC &
Phono connections as
shown:

FIG. 1 FIG. 2

ABC DEF GHI

123

JLK LMN PQR

456

S

TU XWX YZ-

789

M

UTE

POWER

MENU SOURCE

S

MART S SMART P

OK

VOL

PRO

GRAM

INFO 16:9

DCDi COLOR

P/N AUDIO

0F1

Mute

Program List (optional)

Smart Image

Source

Cursor Keys

Channel Up/Down

Switch 16:9 / 4:3 (optional)

NICAM (optional)

OK (confirm selction)

Return

Colour System (optional)

Info

DCDi (optional)

Time

Colour (optional)

Volume Up/Down

Smart Sound

Menu

Numerical Keys

Power

5.2 REMOTE CONTROL

5. Controls

5.1 THE FRONT PANEL

SOURCE

+

-

MENU

Source

CH+ CH- Vol+ Vol- Menu Power

Cursor Keys

Note: The Remote Control
takes 2x AAA (1.5V) batteries,
not supplied.

1. Aim the remote control at the infra-red receiver on the front of the LCD.

2. Avoid pressing, dropping, moistening or disassembling the unit.

3. Avoid pressing remote control buttons continuously and quickly. Allow at least 2
seconds for the remote control to function correctly.

4. In BNC, AV, S-Video and PC modes all functions and adjustments are similar to
a standard TV

5.3 CONTROL FUNCTIONS

Key Function

Power Turn on or standby
Mute Eliminate sound
Numerical keys Number Input buttons
F1 Invalid
Program List Scan or Set Program List
Smart Sound Intelligent Sound mode selection
Smart image Intelligent Image mode select
Menu Press this menu button to display the Main Menu
Source Press this button to display Signal Source selection menu
Cursor Keys Up or Down cursor button: Function select

Left or Right cursor button: Analogue add or reduce

OK Confirm actions
Volume Up/Down Add or reduce Volume Level
Channel Up/Down Add or reduce Channel Number
Info System information display switch
Timer Time Setting button
Return Press this button to return to last watched channel
Switch 16:9 / 4:3 Switches the scale of the display between

FULL, ZOOM1, ZOOM2, NORMAL or PANORAMA

DCDi Invalid
Colour Invalid
Colour System Invalid
NICAM Invalid

6. Basic Operation

POWER ON

Plug power cord into the electrical socket (the LED on the monitor will light
up RED) and press ' ' key on the front panel, then press the POWER
button on the Remote Control to turn on the monitor. The LED on the monitor
will light up GREEN when it is ON.

STANDBY

Press the POWER button on the Remote Control. The monitor will be in held
in standby mode. (the LED on the monitor will light up RED)

NOTE:

1.The monitor set will automatically set to Standby mode if there is no
signal input for 5 minutes when the monitor turns on.

2.The monitor set will automatically set to Standby mode when the preset
time of turning off is reached.

SIGNAL SOURCE SELECTION

1. Press the SOURCE button either on the Remote Control or on the Front

Panel. A menu will be displayed on the screen as shown above.

2. Navigate using the UP/DOWN buttons on Remote Control or CH+/CH-

buttons on the Front Panel to select the signal source from the list.

3. Press the OK button on the Remote Control or MENU button on the Front

Panel to set.

BNC

AV

S-VIDEO

PC

nu Power

MENU NAVIGATION

Use the following steps to navigate through the Menu systems on the
monitor.

1. To enter the Menu system, press MENU button on the Remote Control or

on the Front Panel. The monitor will display the Main Menu.

2. Press LEFT/RIGHT buttons on the Remote Control or VOL+/VOL- buttons

on the Front Panel to select the required Menu, which includes 5
categories: PICTURE, SOUND, ADVANCE, SYSTEM and BNC.

3. Press the DOWN button on the Remote Control or the CH- on the Front

Panel to enter the Menu.

4. Press the UP/DOWN button on the Remote Control or CH+/CH on the

Front Panel to select a Setting Type that you wish to adjust in the Sort
Menu. Press the LEFT/RIGHT button on the Remote Control or VOL+/ VOL­on the Front Panel to adjust the value or setting.

5. Press the MENU button to exit the main menu when the monitor displays

the Main Menu screen. Press the MENU button to return to previous
menu when the monitor displays a sub-menu. Press the SOURCE button to
display the signal source menu.

Note: Settings which can not be adjusted will be hidden automatically
and the colour of the selection will be changed to grey.

6.1 PICTURE ADJUSTMENT MENU

See the table below for the
options available with the
Picture Adjustment Menu:

Option Function Description

PICTURE
MODE

Select picture mode

There are four modes; STANDARD,
DYNAMIC, SOFT or PERSONAL

CONTRAST

Adjust the contrast of
whole picture

Increasing value increases Contrast;
Decreasing value decreases Contrast
(0-100)

BRIGHTNESS

Adjust brightness and
blackness of whole picture

Increasing value increases brightness;
Decreasing value decreases brightness
(0-100)

HUE

Adjust the hue of whole
picture

Increasing value increases green;
Decreasing value increases purple (0-100)

SATURATION

Adjust the saturation of
whole picture

Increasing value increases color;
Decreasing value decreases color (0-100)

SHARPNESS

Adjust the sharpness of
whole picture

Increasing value increases definition;
Decreasing value decreases definition
(0-100)

BLACK LIGHT

Adjust the black light of
whole picture

Increasing value increases black light;
Decreasing value decreases black light
(0-100)

COLOR TONE

Select colour tone mode of
the picture

T

here are three Colour Temperature modes,

NORMAL,

WARM or COOL

Note:

1. The value adjusted by user, such as Contrast, Brightness, Saturation, Hue,
and Sharpness, will be saved automatically when the settings are changed

2. You can only adjust Brightness, Contrast, Sharpness and Black Light in
PERSONAL mode.

REMOTE CONTROL SHORTCUT KEYS

SMART P (Smart Picture) - Switch the Picture Mode between STANDARD,
DYNAMIC, SOFT or PERSONAL

16:9 - Switch the Scale of the display between FULL, ZOOM1, ZOOM2,
NORMAL or PANORAMA

6.2 SOUND ADJUSTMENT MENU

See the table below for the
options available with the
Sound Adjustment Menu:

Option Function Description

SOUND MODE

Adjust audio effect mode

There are four modes; PERSONAL,
STANDARD, NEWS or MUSIC

BASS

Adjust bass value

Increasing value increases bass;
Decreasing value decreases bass (0-100)

TREBLE

Adjusts treble value

Increasing value increases treble;
Decreasing value decreases treble (0-100)

BALANCE

Adjusts balance of left or
right speakers

Increasing value increases left volume;
Decreasing value increases right volume
(0-100)

Note:

1. The value of 50 is recommended for all the Sound settings

2. The treble or bass value will be saved automatically after it is adjusted

3. You can only adjust bass and treble in PERSONAL mode.

Remote Control Shortcut Keys

SMART S (Smart Sound) - Switch the Sound Mode between PERSONAL,
STANDARD, NEWS or MUSIC

MUTE: Press to MUTE
VOLUME: VOL+, VOL

6.3 ADVANCE MENU

See the table below for the
options available with the
Advanced Menu:

Option Function Description

NR

Selects the 3D Noise
Reduction mode

There are three modes; WEAK, STRONG or
OFF

BLUE SCREEN

Turn ON or OFF BLUE
SCREEN

Select ON or OF

SCALE

Select the scale of the
picture

There are five modes; FULL, ZOOM1,
ZOOM2, NORMAL or PANORAMA

Note:

REMOTE CONTROL SHORTCUT KEYS

16:9 - Switch the Scale of the display between FULL, ZOOM1, ZOOM2,
NORMAL or PANORAMA

6.4 SYSTEM MENU

See the table below for the
options available with the
System Menu:

Option Function Description

OSD
LANGUAGE

Choose OSD menu display
language

Select the Language you wish the OSD
menu to be displayed in.

H-POSITION

Adjust H-position of OSD
menu

Increasing value will move OSD menu right;
Decreasing value will move OSD menu left
(0-100).

V-POSITION

Adjust V-position of OSD
menu

Increasing value will move OSD menu down;
Decreasing value will move OSD menu up
(0-100).

DURATION

Adjust duration of OSD
menu

Increasing value extends the duration time
of OSD menu; (0-100).

HALFTONE

Adjust halftone of whole
picture

Increasing value increases halftone;
Decreasing value decreases halftone (0-8)

SLEEP

Set sleep time of the
machine

Choose between; OFF, 15, 30, 45, 60, UNITE:
MINUTE.

RESET

Default to factory settings Reset all v

alues to the settings of the factory

7. Troubleshooting

Symptom Possible Fault Solution

No image. No sound.

Power plug is loose,
power cord is not
connected properly.

1.Check power cord to see if it is
properly connected

2. Press the POWER button on the
Front Panel or on the Remote
Control.

No color

Color saturation is too
low.

Enter the PICTURE ADJUSTMENT
MENU and increase the colour
saturation.

TV is ON, no sound

1. Volume setting is too
low.

2. Sound is muted.

1. Increase volume.

2. Press MUTE button on the
Remote Control to eliminate mute
mode.

Error is showing ‘no
signal input’ with
the Red LED light
flashing.

Signal cable is loose or
has been disconnected.

Check signal cable to see if it is
properly

Remote control does
not work

1.Transmitter/Receiver
window of Remote Control
/Monitor is covered

2. The battery level of
Remote Control is to low.

1. Remove objects obstructing the
Transmitter/Receiver window of
the Remote Control or Monitor.

2. Replace batteries.

Display is faint

1. Adjustment is incorrect.

2. Display mode is incorrect.

1. Use AUTO-ADJUSTMENT
function.

2.

Set to mode :1280x1024@60Hz

8. Specifications

Model: X17LCD X19LCD

Screen Type: Colour LCD

Screen Size: 17” 19”

Resolution: 1280x1024 @ 60HZ

Audio: Yes

Video Inputs:

SVHS Socket

VGA/HDMI Sockets

BNC/Phono Sockets

Audio Inputs: BNC/Phono Sockets

Headphone Output: Yes

Speakers: Dual

Loopthroughs:

BNC Socket (Video Output)

BNC/Phono Sockets (Audio Output)

Remote Control: Yes

Power Requirements: 100 to 240V AC

Power Consumption:

<40W

(<2W on Standby mode)

<45W

(<2W on Standby mode)

Mounting:

Desk (as supplied)

Wall or Ceiling (using optional bracket)

Weight: 6.0kg 7.0kg

Dimensions (WxHxD): 469x390x62mm 510x430x70mm

CCTVCCTV

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local
distributor.

LIMITED WARRANTY:

This product is supplied with a 1 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the place of
purchase.

Manufactured exclusively for Xvision - www.x-vision.co.uk

UK/Europe

Xvision Group (UK)
Unit 2, Valley Point,
Beddington Farm Road,
Croydon
Surrey. CR0 4WP
Email:
[e-mail]

Far East

Kyoung Am Building
157-27 Samsung-dong
Kangnam-ku
135 090 Seoul
Korea
Email:
[e-mail]

Middle East

Burjuman Tower, 18th Floor
PO Box 121828
Dubai 43659
United Arab Emirates
Email:
[e-mail]

North America

100 Park Avenue
New York City,
New York
10017
United States
Email:
[e-mail]