CCTV
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your
local distributor.
LIMITED WARRANTY:
This product is supplied with a limited 3 Year warranty.The Warranty
excludes products that have been misused, (including accidental
damage) and damage caused by normal wear and tear. In the
unlikely event that you encounter a problem with this product, it
should be returned to the place of purchase.
8
Should you require replacement LEDs please contact your local
distributor.
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Email: info@x-vision.co.uk
Web: www.x-vision.co.uk
CCTV
Model: VIS449EX
Colour 60m Long Range
IR Nightvision Camera
Before you begin
• Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.
•The camera must be positioned so that it will not point directly into the sun (sunrise and
sunset) or any bright light, as this may cause damage to the camera.
•Avoid viewing areas where half the area is in bright sunlight and the other half is dark,
such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with
such a large lux level variation.
• Do not cut the camera cables, this will void the warranty.
• Make sure you use only the recommended power supply. Damage caused to the camera by
incorrect voltage or wiring is not covered by the warranty.
Model:
VIS449EX
Colour Long Range Varifocal IR
Cameras with 60 metres Nightvision
Thank you for purchasing this Xvision camera. Before operating this
product, please read this instruction manual carefully.
1. Safety Precautions
Specifications
Model: VIS449EX
Picture Type: Day/Night
(B/W & Colour)
Image Sensor: Sony 1/3” Ex View CCD
DSP: Xvision E1DN
When in use please avoid direct contact with eyes and do not touch
the camera body as it can get very hot.
Resolution: 500 TVL
Lens Viewing Angle: 30 to 64°
When installing the camera, please avoid pointing it directly at
paper or flammable materials.
2 7
Infra Red Nightvision: 60 metres
Minimum Illumination: 0 Lux/ 0.05 Lux (IR On)
Please avoid all direct contact with the tempered glass cover to
avoid contamination. If you need to clean the cover use cotton wool
balls dipped in alcohol or glass wipes.
2. Product Description
The VIS449EX colour long range IR camera is designed for high risk
applications. It offers very high resolution 500 TVL images from its Sony
1/3" CCD sensor and will provide images in complete darkness up to
60 metres and beyond 60 metres in light levels above 0.05 lux. It
features a Varifocal Lens and cable managed bracket and is designed
for internal or external use and can be wall mounted.
Audio: No
Operating Voltage: 12V DC 1500mA
Suggested Power Supply: 12V DC 3500mA Regulated
Mounting: Wall (Cable managed bracket
supplied)
Weatherproofing: Yes
Dimensions (ØxD): 85mm x 130mm
7. Lens Adjustment
3. Features
The VIS449EX is fitted with a Varifocal lens. You can make adjustments
to both the Zoom and Focal Length by following these easy steps:
STEP 1: Carefully unscrew the camera housing and pull the casing
away.
STEP 2: Connect the Video Output to the monitor or other video device
through a 75 Ohms type coaxial cable.
STEP 3: Once the picture appears on the monitor, make the Zoom
Adjustment by rotating the long screw (NEAR-Anti-clockwise, FAR
Clockwise) until you get the desired view. Next make the Focal
Adjustment by rotating the long screw (TELE-Anticlockwise, WIDE
Clockwise) until you get the desired view (as shown in Figure 3). (If the
6 3
long screw does not move turn it Anti-clockwise to unscrew it, this will
loosen it and allow you to make the adjustment, after adjustment
tighten both screws by turning Clockwise, see Figure 4).
Sony 1/3" ExView CCD image sensor for 500 TVL resolution images and
0.01 lux low light sensitivity
The VIS449EX features Varifocal 4.0 to 9.0mm lens with 30° to 64°
viewing angle for super sharp images and easy selection of the
optimum viewing angle during installation.
Integrated Long Life Infra Red LEDs turn on automatically when the
camera switches to B/W mode and provide up to 60 metres
Nightvision.
4. Contents
VIS449EX Camera
Figure 3 Figure 4
Hex Wrench4x Fixing Screws
4x Wall Plugs
5. Product Assembly
6. Installation
1. Make a hole in the wall approximately 30mm wide x 40mm deep.
2. Drill 4 holes and insert the wall plugs.
3. Feed the cables into the wall before fixing the camera using the
4 fixing screws
When attaching
the bracket to the
camera be careful
not to damage
4 5
the cable.
Figure 2
Fixing Holes Guide-
Not shown actual size
Figure 1
Loading...