User Manual
Warnings and Cautions
■ Disclaimer
This manual may contain several technically incorrect places or printing
errors. The updates will be added into the new version of this manual.
The content is subject to change without notice.
■ Avoid Electric Shoc k
To prevent electric shock, do not remove screws or cover.
■ Avoid excessive moi sture
Do not use strong or abrasive detergents when cleaning camera body.
Clean with dry cloth or mild detergent, wiping gently.
■ Do not use camera beyond prescribed voltage range.
Only use included power supply. Ensure power input source conforms
to local voltage. Voltage outside of range could cause damage or
abnormal performance.
■ Termly Inspection
A few parts of the device shall be replaced regularly due to their
average enduring time.
■ Never attempt to disassemb
le the camera privately.
It may result in internal components damaged.
Use only under temperature conditions
between -40°C and +70°C.Provide
good ventilation when using in high
temperature conditions.
HD S Dome Camera
Thank you for purchasing our HDS camera. Please read this manual
carefully for correct use of the product and keep it for reference purposes.
Do not drop the camera or subject it to
physical shock.
It may cause production malfunction.
Do no t aim ca mera at sun or extra
bright pl ace.
Strong light will degrade image quality
and could cause damage.
Avoi d touchin g the camera lens.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Pag e 1
Page 2
Page 3
Page 4
Components and Accessories
Overview
Connecting to Monitor
Do no t plac e the camera in e xtreme hot
or co ld environment.
1
2
3
Mounting Ba se
Lower D ome
Pow er Cabl e
Vide o Cable
4
Connecting to Power
Connect the adapter to the power input connector in accordance with the
camera. The recommended adapter specification for the camera is
DC12V.
Video
HDMI
VGA
HDS DVR
Monitor
1
2
3
4
DC12V
Pow er
Camera
User manual
Drill Template
Scr ewdriver
Scr ews
XTS CORP - Headquarters
Product Development Dpt.
www.xtscorp.com
XTS CORP - Headquarters
Product Development Dpt.
www.xtscorp.com
* Before y ou start, p lease mak e sure th at the wall or ceiling is s trong enough to
withstand three times t he w eight of the camera.
* Thi s installatio n should be made b y a qualified service person and should
confir m to all local codes.
Model
Image Sensor
Pixels
Signal System
Min . Illumination
Lens
IR Visible Distance
IP Rank
Vide o Out
Resolution
Frame Rate
ICR
DNR
S / N Ratio
Electronic S hutter
AGC
White Balance
Pow er
Temperature
Humidity
Dimensi on ( mm )
MD1080PF-HDS
1 / 3'' CMOS
PAL / NTS C
0 Lux ( LED O N )
3.6 mm
No ( 10 ~ 20m o ptional)
IP66
BNC x 1
1080P (1920 x 1080 )
30fps ( 60Hz ), 2 5fps ( 50 Hz )
Yes
Yes
> 52dB ( AGC OFF )
Yes
Auto Wh ite Balance
DC 12V ± 10%
- 40°C~70 °C
10% ~ 9 0%
Ø116 x 91
1 / 50s ~ 1 / 6 7500s
Correct D isposal of Thi s Produc t
If th e camera no l onger functions o r can no longer be repaire d, it must be dis posed
of according t o re gulations reading electronic w aste. By no t disposing of electroni c
items in ho us ehold w aste you will not o nly be fo llowing the law, but c ontributing
the protection o f the environmen t.
Page 8
Pag e 7
Page 6
Page 5
Installation
Features
Specications
1. Attach the drill template to the place where you want to fix the
camera and then drill 4 screw holes and 1 cable hole (if you want
to route the cables through the mounting base) according to the
drill template.
2. Loosen the screws to open the lower dome.
3. Route the cable and connect the power cable and the video cable.
Then secure the camera to the ceiling or wall with the screws.
4. Install the lower dome back to the camera and fix it with the screws.
5. Remove the protection film softly to finish the installation.
Installation
1280 x 72 0
1920 x 108 0
This series of cameras adopt the latest HDS technology and advanced
circuit design, feature high definition and sensitivity, low noise and
distortion and support HD video transmission with the common coaxial
cable, ensuring the requirement of the HD monitoring in the traditional
surveillance system.
● High Transmission Performance
Real-time transmission with high speed and long distance.
● ICR Auto Switch
The filter will filter infrared light during the daytime and change to
normal at night to ensure a high sensitivity and clear image.
● Color-B/W Auto Switch
The camera will display color image in daytime and become
monochrome automatically at night .
● Auto White Balance
Adjust the color temperature according to t he environmen t
automatically.
● DNR
Reduce noise from brighteness and co lor sign al t o save s to rage
room under low illumination cond ition .
● High Resolution
Adopt high performance HDS sensor, providing high definition and
clear image, up to 720P/1080P resolution.
XTS CORP - Headquarters
Product Development Dpt.
www.xtscorp.com
Loading...