Version : 1.0
XL-SE64I / XL-SE64E
User Manual
Introduction
About this Manual
Thank you for using the product of XtendLan.
The XTENDLAN XL-SE64I / XL-SE64E products will be introduced throughout this manual. The
information in the manual has been thoroughly checked before publication, but may not conform to the
product actually delivered. Actual product specifications depend on the product shipped to you. Any
update in the specifications or product-related information shall not be subject to further notice. For the
latest information on the product, please visit the website at www.XtendLan.com
your contact window of our sales.
or directly consult with
Contents
Chapter 1 Product Information...................................................... 4
1.1. Features........................................................................................ 4
1.2. Hardware Introduction
1.2.1. XL-SE64I Internal Encrypted Data Storage
1.2.2. XL-SE64E External Encrypted Data Storage
....................................................................... 4
…........................................ 4
…….................................... 5
Chapter 2 Installation.................... .. .......................... .. .. ............... 6
2.1. Accessories Check........................................................................... 6
2.1.1. XL-SE64I Internal Encrypted Data Storage
2.1.2. XL-SE64E External Encrypted Data Storage
2.2. Hardware Installation
2.2.1. XL-SE64I Internal Encrypted Data Storage
2.2.2. XL-SE64E External Encrypted Data Storage
2.3. Formatting the HD
......................................................................... 6
............................................................................ 11
……..................................... 6
…….................................... 6
............................................ 6
........................................... 9
Chapter 3 Notes for Use................................................................ 12
Appendix
A. Hard Drive Certification list................................................................. 13
Chapter 1 Product Information
Personal innovations, technology researches, and client information are the most important data to maintain
company
hardware encryption technology. Incorporating an encryption key like a USB flash drive, it
provides users with a safe encrypted data storage solution to secure the information stored in a hard drive,
without
hard
reputation or personal privacy. The XTENDLAN XL-SE64I use DES (Data Encryption Standard)
impact on the system performance. After the encryption is done, even you lose or throw away the
drive, NO ONE is able to access the sensitive data in the hard drive without the encryption key.
• Status Indications of LEDs:
1. When the power is turned ON, the power LED indicator will light on green.
2.
The FAIL LED indicator will light on red, in case of the fan is malfunctioned or the system is over heated.
3. The Access LED indicator on the HD tray blinks when the data is accessed from the hard disk drive.
1.2.2. XL-SE64E External Data En cryption Storage
1.1. Features
• Encryption all data in the HD • Work as an encrypted boot disk
• Hardware encryption. No software installation is required. • SATA to SATA Interface
•
With DES hardware encryption, no impact on the system performance.
• Higher security with the encryption key.
1.2. Hardware Introduction
1.2.1. XL-SE64I Internal Data Encryption Storage
• Mobile Safety Box
• Status Indications of LEDs:
1. When the power is turned ON, the power LED indicator will light on green.
2.
The FAIL LED indicator will light on red, in case of the fan is malfunctioned or the system is over heated.
3. The Access LED indicator on the HD tray blinks when the data is accessed from the hard disk drive.
SB2
4 Product Information Product Information 5
Chapter 2 Installation
2.1. Accessories Check
After you open the outer package, make sure that the following items are contained in the package:
2.1.1. XL-SE64I Internal Data Encryption Storage
• XL-SE64I product body
• 2 encryption keys
• Power Cord (5 cm)
• SATA Cable (5 cm)
• CD
• User Manual
• Accessory kit (including screws and a plastic key)
2.1.2. XL-SE64E External Data En cryption Storage
• XL-SE64E product body
• 2 encryption keys
• DC Adapter
• eSATA Cable
• USB Cable
• CD
• User Manual
• Accessory kit (including screws and a plastic key)
• 1394b Cable (WBS1 Only)
Please contact your distributors or sales representative, in case of any missing accessory or damage to
the product body before unpacking.
After making sure all hardware components and accessories are included, please refer to the following
procedure to finish the hardware installation.
Step 2 Install the product body on the computer, fasten it with the screws that come with the accessory
kit, and then connect the power cord
Step 3 Connect one end of the SATA cable to the SATA port on the product body and the other end to
the SATA port on the motherboard
Step 4 Remove the tray and fasten the HD drive with the screws that come with the accessory kit
2.2. Hardware Installation
2.2.1. XL-SE64I Internal Data Encryption Storage
Step 1 Connect the power cord and SATA cable to the back of the hardware
6 Installation Installation 7
Step 5 Place the tray back in the product body
2.2.2. XL-SE64E External Data En cryption Storage
Step 1 Please place the XL-SE64E on a steady desk or space near the computer to avoid any
damage to the HD drive due to any unexpected impact.
Step 6 Insert the encryption key into the encryption key slot in front of the product body properly
Step 2 Remove the tray and fasten the HD drive with the screws that come with the accessory kit.
Step 7 After making sure all the hardware has been properly installed, turn ON the computer. The LED
indicator on the encryption key will light on after a normal boot
Step 3 Place the tray back in the product body.
Step 8 Installation completed. You have successfully installed the XL-SE64I product.
Step 4 Depending on your hardware, select one of the SATA port, USB2.0 port, or 1394b port on the
back-end of the product body. Connect one end of the cable to the selected port and the other
end to your computer. Then connect the power cord.
8 Installation Installation 9
Step 5 Insert the encryption key into the encryption key slot in front of the product body properly.
Step 6 After making sure all the hardware has been properly installed, turn ON the device, and then
the computer. The LED indicator on the encryption key will light on after a normal boot.
Step 7 Installation completed. You have successfully installed the XL-SE64E product.
2.3. Formatting the HD
After the hardware has been properly installed, you will have to format the HD before storing data in it.
Please follow the following procedures to format the HD.
Step 1 After the computer boots properly, please go to “Device Manager”, in which you will see the
newly added HD drive
Step 2 Select the newly added HD drive, and start initializing the HD. After the initialization is done,
you can “format” the HD as a desired one according to your preference or need. After the
formation, you can start using the HD device
10 Installation Installation 11
Chapter 3 Notes for Use
To make sure that your data is fully protected, the XL-SE64I uses DES hardware encryption. Pay attention
to following notes to avoid any data damage or loss while using the XL-SE64I/XL-SE64E :
1. To
properly use the system device, please insert the encryption key first before turning ON the computer.
This
will make sure the encryption key is properly identified. If the startup order is reversed, the device
will not be activated.
2. After the encryption key has activated, the HD will be protected. Without the proper activation of the
hard disk lock, the data is not able to be accesses properly.
3. Please make sure that the encryption key is preserved with great care. If the encryption key is lost or
damaged, there is no way to retrieve the data from the HD drive, neither do the system vendors have
any remedy available for the data.
4. If you turn ON the computer without inserting the encryption key, the system will still be able to
recognize the HD drive; however, the HD drive will be displayed as an unformatted drive. If the HD is
formatted accidentally, the data is unrecoverable.
Appendix
A. Hard Drive Certification list
Vendor Model
Seagate 80GB (ST3808110AS)
Seagate 160GB (ST3160812AS)
Seagate 200GB (ST3200827AS)
Seagate 250GB (ST3250824AS)
Seagate 500GB (ST3500641AS)
Seagate 750GB (ST3750640AS)
Western Digital 80GB (WD800JD-00LSA0)
Western Digital 500GB (WD5000KS-00MNB0)
Hitachi 400GB (HDS724040KLSA80)
Hitachi 500GB (HDS725050KLA360)
Maxtor 500GB (6H500F008A70A)
12 Notes for Use Appendix 13
Loading...