HD IP IR High-speed Dome
Camera User Manual
Read the user manual carefully before using this product
Important Safeguards
1. During the course of transportation and storage, the product should
be avoided from incorrect operations such as heavy pressing, strong
vibration, soaking etc, which may cause damage to the unit.
2. The product is designed for wall-mount and pendant-mount
installation, it can not be installed upside-down. And the module
should be handled properly so as not to bring about mechanical
problems affecting the integrative functions of it.
3. Do not let any foreign objects or liquid infiltrate into the unit, which
may damage the machine.
4. Please follow all electrical standards for safety when it is being
connected and adopt the particular power supply which is provided
with the unit. The product adopts TVS-class lightning damage
preventing technology, which can effectively prevent such pulse
signal damage caused by lightning under 500W or electric surge.
Video signal should be kept enough distance from high voltage
equipment and cables when they are in transmission, and necessary
steps should be taken to prevent lightning damage or power surge.
5. No matter the unit is ruining or not, the camera should never be
aimed at the sun or object with extremely bright light. Otherwise, the
camera’s CCD might be permanently damaged.
6. There are no parts inside the unit which can be repaired by the users
themselves. When mechanical problems arise, do not be in a haste to
do any repairing, please refer to the User’s Manual to find the trouble.
If causes can not be located, please refer servicing to qualified
professionals. All servicing must be done by authorized personnel.
Table of Content
1 Product Description.......................................................................... - 1 -
1.1 System Requirement..............................................................- 1 -
1.2 Product Description...............................................................- 1 -
1.3 Product Feature......................................................................- 2 -
1.3.1 PTZ Performance....................................................... - 2 -
1.3.2 Network Performance................................................ - 4 -
2 Connection Mode.......................................................................... - 8 -
2.1 Direct Connection..................................................................- 8 -
2.2 Network Connection..............................................................- 8 -
2.3 Power On............................................................................... - 9 -
2.4 Camera Protocol, Bit Rate, Address Setting....................... - 10 -
2.5 HD IP IR High-speed Dome Camera Hot Key List............- 10 -
3 PTZ and Camera Function.......................................................... - 13 -
3.1 PTZ Control.........................................................................- 13 -
3.2 PTZ Function.......................................................................- 14 -
3.2.1 Preset Position Calling............................................. - 14 -
3.2.2 Patrol.........................................................................- 16 -
3.2.3 Pattern.......................................................................- 17 -
3.2.4 Auto Pan................................................................... - 19 -
3.2.5 Idle setting................................................................ - 20 -
3.2.6 Area setting...............................................................- 22 -
3.2.7 IR light......................................................................- 22 -
3.2.8 Status........................................................................ - 23 -
3.3 PTZ setting.......................................................................... - 25 -
3.3.1 PTZ function.............................................................- 25 -
3.3.2 OSD Information......................................................- 27 -
3.3.3 Data delete................................................................- 27 -
3.3.4 OSD attribute............................................................- 28 -
HD IP IR High-speed Dome Camera User Manual
3.3.5 Alarm setting............................................................ - 29 -
3.3.6 Title setting...............................................................- 29 -
3.3.7 patrol setting.............................................................- 29 -
3.3.8 Other setting............................................................. - 31 -
3.4 Camera setting.....................................................................- 32 -
3.4.1 Auto Recovery..........................................................- 32 -
3.4.2 Lens Data..................................................................- 34 -
3.4.3 DSS...........................................................................- 36 -
3.4.4 AE Mode...................................................................- 36 -
3.4.5 AWB......................................................................... - 37 -
3.4.6 BLC.......................................................................... - 38 -
3.4.7 Image setting............................................................ - 38 -
4 IP Function...................................................................................- 40 -
4.1 Log in...................................................................................- 40 -
4.1.1 Device log in............................................................ - 40 -
4.1.2 Home Page Instruction.............................................- 43 -
4.1.3 Home Page Instruction.............................................- 44 -
4.2 Video record........................................................................ - 46 -
4.3 Log out.................................................................................- 47 -
4.4 System setting......................................................................- 47 -
4.4.1 Basic information..................................................... - 47 -
4.2.2 Time setting..............................................................- 48 -
4.2.3 System operation......................................................- 49 -
4.2.4 System update...........................................................- 50 -
4.2.5 Users manage........................................................... - 51 -
4.2.6 System state..............................................................- 52 -
4.2.7 System log................................................................ - 54 -
4.2.8 SCM update..............................................................- 54 -
4.3 Network setting................................................................... - 55 -
4.3.1 Ethernet.....................................................................- 55 -
HD IP IR High-speed Dome Camera User Manual
4.3.2 PPPOE...................................................................... - 56 -
4.3.3 DDNS setting........................................................... - 56 -
4.3.4 Net port.....................................................................- 57 -
4.3.5 Email setting.............................................................- 58 -
4.3.6 FTP setting................................................................- 58 -
4.3.7 Network setting........................................................ - 59 -
4.4 Audio and video...................................................................- 61 -
4.4.1 Video channel........................................................... - 61 -
4.4.2 Video parameter....................................................... - 62 -
4.4.3 Video setting.............................................................- 65 -
4.4.5 Extend setting...........................................................- 65 -
4.5 Vedio capture....................................................................... - 66 -
4.5.1 Front end record....................................................... - 66 -
4.5.2 Remote record.......................................................... - 69 -
4.5.3 Disk status................................................................ - 70 -
4.6Alarm setting........................................................................ - 70 -
4.6.1 alarm setting............................................................. - 71 -
4.6.2 Video loss................................................................. - 72 -
4.6.3 Link attr.................................................................... - 73 -
4.6.4 Alarm linkage........................................................... - 74 -
4.7local setting...........................................................................- 75 -
- 1 -
1 Product Description
1.1 System Requirement
1) Operation System：Microsoft Windows XP/2003/Vista/WIN7.0
2) Browser： Microsoft Internet Explorer 8.0 above
3) Hardware requirement： CPU：Intel Core 2 Duo E4600 / 2.4 GHz
or above
Internal Storage： 1GB or above
Graphics card： Nvidia GeForce 8600 GT or above
Network card： 10/100Mbps
1.2 Product Description
With the rapid development of our society, increasing requirement
towards security product has been aroused in, and communication
technology has greatly pushed forward the progress of security industry.
HD IP IR high speed dome camera is a new generation of network
video monitoring terminal, with clear CMOS sensor and
high-performance IP processor chip, which secures full frame rate and
HD liquidity sport video. The camera supports video coding
compression and data transportation, with which users can get access to
HD IP IR High-speed Dome Camera User Manual
- 2 -
the real time remote image and voice. At night time, camera can give
out the infrared light which cannot be seen by human eyes. The PTZ
out casing has high protection level and great ability to prevent attack
and destroy, it can be widely used in the field like protection & security,
transportation, banking, electric system, medical system, etc.
1.3 Product Feature
1.3.1 PTZ Performance
Self- developed of HD integrated zooming lens camera module,
1/3″CMOS.
DSP & sophisticated step motor lead to accurate focusing and HD
imagery.
Delicate and compact structure facilitates easy installation &
cabling.
Entire aluminum alloy sealed structure, with excellent heat
dispersion &IP66.
IR-III design support high grade luminescence efficiency, long
illuminate distances, evenly distribution of optical field, long
life-span.
HD IP IR High-speed Dome Camera User Manual
- 3 -
Built-in defogger ensures clear picture capture with no frog
internally.
PTZ can flip automatically and accommodate to the control of
focal length.
Preset position，Auto Pan, patrol, pattern can be set.
PTZ operating states can be cheek through long-distance.
Guard function: can be linked to preset position, patrol, Auto Pan,
pattern, etc.
Support 3D smart positioning, click-tracing and amplification can
be achieved through IE browser.
EEPROM data storage method, storage data will not be lose when
the electricity is off, PTZ can return k to the position after
electricity on.
Remote updating function: SCM update, auto system update,
camera update.
Low power consumption: DC12V; less than 8W when IR off, Max.
Power consumption is 18W when power on. Support solar power
supply.
HD IP IR High-speed Dome Camera User Manual
- 4 -
1.3.2 Network Performance
H.264 video compression leads to high compression rate with
good image quality; support dynamic code rate control.
Built-in Web Server makes monitor, configure, and manage on IE
possible.
Network self-adjustable function: video transport frame rate can be
adjusted automatically according to the network bandwidth.
Support multiple stream output with 1080P/ 720P/ D1/ CIF/ QCIF.
Support multiple users log in; log on privilege can be set.
Image parameter can be adjusted.
Support snap.
Support move detection.
Support local and front-end video record and playback.
Support standard streaming media, third-party media players can
play the live video and replay files.
HD IP IR High-speed Dome Camera User Manual
- 5 -
1.4Technical Data
Camera
Image Sensor
1/3”,1.3Mega
CMOS
Sensor
1/2.9”2.43Mega
CMOS Sensor
Pixels 1.3MP 2.0MP
Horizontal Resolution 720P 1080P
Video Standard
1280*720/25/
30P
1920*1080/25/30;128
0*720/25/30
Min. Illumination 0.3LUX@F1.6 IR off,0LUX@IR on.
Gain Control 0～255 adjustable step4
S/N Ratio >50dB
White Balance auto/ indoor/outdoor/ manual/ ATW
WR WDR
DNR 2D off & low/middle/ high optional
Shutter Time 1/12.5～1/10000 S
Lens
Focal Length 5.6mm～100.8mm
Optical Zooming 18X 20X
Lens F3.5～F1.6
Visual Angle
horizontal:48.3°～
3.1°
horizontal:
54.8°～3.4
Network
Video Compression
Standard
H.264
Audio Compression
Standard
AMR,G.711
Max. Frame Rate
720P 25 frames /s 1080P 25
frames /s
HD IP IR High-speed Dome Camera User Manual
- 6 -
Video Resolution
1280*720(720P),720*576(D1),352*
288
(CIF) ,176*144(QCIF)
1920*1080（1080P)，720*576
（
D1,352*288(CIF),176*144(QCIF)
Code Stream Type
720P/D1/CIF/QCIF
1080P/D1/CIF/QCIF
Audio Compression Code
Rate
16Kbps～8Mbps
Image Delay <200 millisecond(LAN)
Internet Interface
RJ-45 10/100M network
self-adjustable
Internet Protocol
RTSP/RTP/RTCP/HTTP/HTTPS//F
TP/DHCP/MUDP/SMTP/CIFS/UPN
P/PPPOE/NTP/DDNS
Device End Storage
TF card maximum support 16G
（
optical
）
Trigger Condition move detection/ video loss
Move Detection
Sensitivity:1~100 adjustable, linkage
alarm can be set
Video Loss
Sensitivity:1~100 adjustable, linkage
alarm can be set
PTZ
Manual Control of Pan
0.1º～140º/S;Max: 115 º～160º/S
adjustable，Max. preset speed:350º/S.
Manual Control of Tilt
0.1º～120º/S;Max. preset
speed:300º/S.
Rotating Range
360°unlimited; tilt:0 º
～
90º ; Max.
angle: 85 º～93 º adjustable
HD IP IR High-speed Dome Camera User Manual
- 7 -
Auto Flip Function 180° when vertical
PTZ control
PTZ speed auto-adjusting per focal
length
Left &Right Scan 4 groups
Speed of Left& Right
Scan
Level 1～256 adjustable
Pattern 4 groups
Preset Position 210
patrol 4 groups
Point of each patrol 1-24 presets of each
3D Position support
Defrog Function built-in defogger
Remote Updating
support remote SCM update, auto
system update, camera update
IR
Performance
IR Performance 6 high-power IR lamps, 2 micro laser
lamps,IR distance :150M.
Max. Consumption 10W
Outside
Interface
RJ45 Ethernet 10/ 100 M self-adjustable
DC Power Supply
Interface
DC12V/3A
Generic
Specification
Power Supply DC12V±10％（3A）
Max. Consumption 18W
Working Condition
Temperature:-30℃～
60℃;humidity:≤95% with out
condensation
Protection Level IP66
Weight 4.7Kg
HD IP IR High-speed Dome Camera User Manual
- 8 -
2 Connection Mode
2.1 Direct Connection
Connect the camera to PC by network directly.
2.2 Network Connection
Can connect the camera to internet, user can log in the device
through client side software of browser.
There are two ways to connect to internet:
Through PPPOE and DDNS
Through router, as below figure
HD IP IR High-speed Dome Camera User Manual
- 9 -
Network Connection Diagram
Attention: do not put the wire and network cable to places that will
be easily touched by people, to avoid signal
2.3 Power On
1. Check the polarity of plug, socket and other connection, power on
after confirmation
2. Camera will do self-checking, rotate 360º horizontally and 90º
vertically for checking the camera lens, the electronic and machine
structure for camera in horizontal and vertical status, after that, the
camera will execute reset program and rotate to original. When the
camera stop completely, the self-checking is finish and ready for
controlling.
HD IP IR High-speed Dome Camera User Manual
- 10 -
3. The continuous working time for dome camera is 18000H, please try
to avoid keeping the dome camera working for long.
2.4 Camera Protocol, Bit Rate, Address Setting
The setting for HD IP IR camera protocol, baud rate and address is
fix and can't be changed. After self-checking, the system information
for camera is as below:
2.5 HD IP IR High-speed Dome Camera Hot Key List
Tip: some special functions don't have coordinate command in
'PELCO-D' protocol, in order to control these functions, we have
switched the function for some common use command. Normally will
switch by 'change preset position/set preset position', this function will
be introduced in 4.1.3, below list the command switch form:
Protocol： PELCO-D
Baud Rate：38400bps
Address： 1
Data Bit：8
Stop Bit：1
Parity Check：No
HD IP IR High-speed Dome Camera User Manual
- 11 -
HD IP IR High-speed Dome Camera Hot Key List
Item Hot key Function Call preset
position
Set left/right scan Set left/right scan1-- left limit 210
Set left/right scan1-- right limit 211
Set left/right scan2-- left limit 212
Set left/right scan2-- right limit 213
Set left/right scan3-- left limit 214
Set left/right scan3-- right limit 215
Set left/right scan4-- left limit 216
Set left/right scan4-- right limit 217
Operate 360°scan Operate 360°circle scan 220
Operate left/right scan
Operate left/right scan1 221
Operate left/right2 222
Operate left/right scan3 223
Operate left/right scan4 224
Set left/right scan speed Speed=20 225
Speed=60 226
Speed=80 227
Operate pattern Operate pattern1 231
Operate pattern2 232
Operate pattern3 233
Operate pattern4 234
Record pattern Record pattern1 235
Record pattern2 236
Record pattern3 237
Record pattern4 238
Stop record pattern Stop current record 239
HD IP IR High-speed Dome Camera User Manual
- 12 -
Operate tour loop scan Operate tour loop scan1 241
Operate tour loop scan2 242
Operate tour loop scan3 243
Operate tour loop scan4 244
Delete tour loop scan Delete tour loop scan1 245
Delete tour loop scan2 246
Delete tour loop scan3 247
Delete tour loop scan4 248
Activate insert tour loop
preset position
Allow to insert tour loop preset
point
240
Close insert tour loop
preset position
Cancel insert tour loop preset
position
249
Insert tour loop preset
position
Insert preset position 1-209
Return to default setting Return to default setting 251
HD IP IR High-speed Dome Camera User Manual
- 13 -
3 PTZ and Camera Function
3.1 PTZ Control
1、PTZ Control
Name Illustration Remark
Module& PTZ Control
Zoom+/Zoom- Control the zooming times of camera
manually
Focus+/Focus- Adjust camera focusing manually
Iris+/Iris- Control the aperture of camera open & close
R-Wiper/S-Wiper Turn on & turn of the wiper Not support
PTZ Control
Up Direction of PTZ: up
Down Direction of PTZ: down
Left Direction of PTZ: left
Right Direction of PTZ: right
Auto rotating PTZ rotates 360°unlimited
Speed Set the rotating speed of PTZ Range：1-63
HD IP IR High-speed Dome Camera User Manual
- 14 -
3.2 PTZ Function
3.2.1 Preset Position Calling
Click the “Preset Position”menu, like the picture below:
1、Set preset position
Adjust the direction of PTZ to the preset position that you want to
set ,drop down the preset list, choose the preset position formation,
click “setting” button, and then finished.
Attention: users can set the preset position from 1 to 209 manually.
2、Call preset position
（1）、 In the preset position list ,choose the preset position
information ,then click the” calling” button.
HD IP IR High-speed Dome Camera User Manual
- 15 -
（2）、 Input the preset position number in preset text box, then click
the “call” button.
3、Clear preset position
In the preset position list，choose the preset position information,
then click the “clear” button.
4、Set the title of preset position
In the preset position list, choose the preset position information,
modify the title of preset in the title text box, and click the “set” button.
Like the picture below.：
5、Special preset position calling
Number 210 to 251 are the special preset position of PTZ camera.
Users can see the preset list in IE, double-click or choose the special
preset information, click “setting” button, then the special preset has
HD IP IR High-speed Dome Camera User Manual
- 16 -
been called and the related function can be achieved.
Attention：The special preset positions in PTZ can only be called,
users can not delete or modify them.
3.2.2 Patrol
Click :patrol” button, enter the menu below:
This camera supports 4 patrols, each group can set 24 preset
position max.
1、Insert / delete preset position in patrol
（1）Insert ： drop down the list of patrol path，choose the patrol
information, then choose the preset position in the
preset position drop down list, click “insert” button.
（2）Remove ： drop down the list of patrol path，choose the patrol
information, then choose the preset position in the
HD IP IR High-speed Dome Camera User Manual
- 17 -
preset position drop down list, click “remove”
button.
2、Start patrol
Drop down the patrol path list, choose the patrol information, click
“start” button.
3、stop patrol
Drop down the patrol path list, choose the patrol information, click
“stop” button.
4、delete patrol
Drop down the patrol path list, choose the patrol information, click
“delete ”button.
3.2.3 Pattern
Click the pattern menu, like the picture below:
HD IP IR High-speed Dome Camera User Manual
- 18 -
This PTZ supports 4 groups pattern.
1、Record pattern.
（1）、 drop down the pattern list, choose the number of each pattern.
（2） 、 click “start record” button, the PTZ starts to remember and
record the scan path, users can set the moving path with PTZ
control button.
（3）、 click “stop record” button, the camera will stop record pattern.
2、Operate pattern
In the drop-down list of pattern, choose the information of pattern,
click “start”.
3、Stop pattern
In the drop-down list of pattern, choose the information of pattern,
click “stop”.
4、Delete pattern
In the drop-down list of pattern, choose the information of pattern,
click “delete”.
HD IP IR High-speed Dome Camera User Manual
- 19 -
3.2.4 Auto Pan
Click “left & right” button，like the picture below:
This PTZ supports 4groups Auto Pan.
1、set left limit position and right limit position
（1）、 In the drop-down list of Auto Pan , choose the number of Auto
Pan.
（ 2 ） 、 Control PTZ to the left limit position through PTZ control
interface, click “left limit ”,and the left limit position of Auto
Pan has been set.
（ 2 ） 、 Control PTZ to the right limit position through PTZ control
interface, click “right limit ”,and the left right position of
Auto Pan has been set.
HD IP IR High-speed Dome Camera User Manual
- 20 -
2、Start Auto Pan
In the drop-down list of left & right , choose the number of left &
right, click “Start” button.
3、Stop Auto Pan
In the drop-down list of left & right , choose the number of left &
right., click “stop” button.
4、delete Auto Pan
In the drop-down list of left & right , choose the number of left &
right., click “delete” button.
3.2.5 Idle setting
If there is no operation on PTZ during the setting time, the PTZ
will execute the idle function and turn to the guard position which set
before. The idle function supports preset position calling, patrol, Auto
Pan and pattern.
Click the menu of “idle”, like the picture below:
HD IP IR High-speed Dome Camera User Manual
- 21 -
1、 Input the time for idle waiting in the text box of residence time,
unit is second.
2、 In the drop-down list of idle function, choose the function you want
to operate, this dome camera support preset position calling, patrol,
Auto Pan, pattern.
3、 After choose the function of guard Idle, then choose the right
number of function. This dome camera supports preset position
calling, 4 groups patrol, 4 groups Auto Pan, 4 group’s pattern.
Click “set” button, the guard position idle function will start using.
If there is on operation on PTZ during the setting time, the PTZ will
execute the guard position function.
HD IP IR High-speed Dome Camera User Manual
- 22 -
3.2.6 Area setting
Click the menu of “Region”, like the picture below:
Attention：This dome camera cannot support Region at present.
3.2.7 IR light
Click the menu of “ IR ” , like the picture below:
1、 Sensitive ： Use mouse to move the scroll bar, set the light
sensitivity level. The range is 0-10. 0 means IR light is
off. 1-10 means 10 different level of sensitivity.
HD IP IR High-speed Dome Camera User Manual
- 23 -
2、Switch mode： In the drop-down list of switching mode, users can
choose 2 different mode of IR switching: light
sensor mode & amount of camera light through
mode.
3、Bright mode: In the drop-down list, there are two modes: Indoor
mode & Outside mode.
4、 Control mode: In the drop-down list, there are two modes: auto
control, light for short distance manually, light
for middle distance manually, light for distance
manually.
5、 Discount delay: In the drop-down list, time can be set from 0 to
20s.
3.2.8 Status
Click the button “Status”, users can see the present operating
condition of dome camera. Like the picture below:
HD IP IR High-speed Dome Camera User Manual
- 24 -
1 、 Users can see the horizontal position, vertical position, zooming
times of camera, Inside temperature of dome, inside voltage,
outside voltage, light sensor voltage,etc.
2、 Click “manual refresh”, the dome camera will refresh the present
running state.
3、 Users can set the interval time of refresh cycle in the text box, the
range is from 1s to 10s. Click “auto refresh”, the dome camera will
refresh the running state automatically information per interval
time.
HD IP IR High-speed Dome Camera User Manual
- 25 -
3.3 PTZ setting
3.3.1 PTZ function
Click the “PTZ function”, and then enter the interface like the
picture below:
1、Temp. Unit: There are two modes of temperature: Centigrade
degree & Fahrenheit degree.
HD IP IR High-speed Dome Camera User Manual
- 26 -
2、 Proportional Zoom: In the drop-down list, users can choose to
turn on or turn off speed smart adjust.
Switch on: the rotating speed of dome
will linked to camera zooming times, the
bigger the zooming times is, the slower
the speed of dome is. Switch off: there is
no linkage between speed of dome and
zooming times of camera. The rotating
speed is fixed with any zooming times.
3、 Tilt range: Rotating range can be set in the drop-down list from
85° to 93°.
4、 Pan speed: Horizontal rotating speed can be set in the drop-down
list from 115°/s to 160°/s.
5、 Tilt speed: Vertical rotating speed can be set in the drop-down list
from 52°/s to 70°/s.
6、 Compass : Click “OK”, camera will present horizontal coordinates
position as the truth north direction, which is the
direction of 0°.
Attention ： This camera is not support the function like initial
information, fans control, heat control, auto restart.
HD IP IR High-speed Dome Camera User Manual
- 27 -
3.3.2 OSD Information
Click “OSD information” and see the interface below:
Attention: This PTZ cannot support OSD information setting.
3.3.3 Data delete
Click “data delete” ,and enter interface like below:
HD IP IR High-speed Dome Camera User Manual
- 28 -
1 、 Delete preset : Click the “delete preset”, users can delete the
information of preset position and clear out the
information from the list.
2、 Delete Auto Pan: Clicks “delete Auto Pan” and users can delete the
information of Auto Pan.
3 、 Delete patrol: Click “delete patrol”, and users can delete the
information of patrol.
4 、 Delete pattern: Click “delete pattern”, and users can delete the
information of pattern.
3.3.4 OSD attribute
Click “OSD attribute” and enter the interface below:
Attention: This dome camera cannot support the function of setting
character attribute.
HD IP IR High-speed Dome Camera User Manual
- 29 -
3.3.5 Alarm setting
Click “alarm” and enter the interface below:
Attention:This dome camera cannot support the function of alarm
setting.
3.3.6 Title setting
Click “title setting” and enter the interface below:
Attention: This dome camera cannot support the function of title
setting.
3.3.7 patrol setting
Click the “patrol” and enter the interface below. Users can modify
HD IP IR High-speed Dome Camera User Manual
- 30 -
the patrol information, the preset position of patrol, the dwell time of
preset position.
1、 In the drop-down list of patrol path, choose the path number. This
dome supports 4 paths.
2 、 In the drop-down list of preset, users can set or modify the
information of preset. In the list of Dwell Time, users can choose
HD IP IR High-speed Dome Camera User Manual
- 31 -
the staying time of each preset. Each patrol can set 32 preset
positions. This dome supports 24 preset positions at present.
3、 Click “save”, the patrol information will be saved.
Click “start”, the dome will operate the patrol.
Click “delete”, the dome will delete the patrol information.
3.3.8 Other setting
Click “Other”, and then enter the interface below. Users can see
the initialization information, and can restart or default the camera.
HD IP IR High-speed Dome Camera User Manual
- 32 -
1 、 Initialization Information: Users can see the information like:
dome software vision, camera
software vision, dome model, PTZ
pan check, PTZ tilt check and
camera module check.
2、 Set Clock: Click “set clock”, time of dome camera can match to
computer.
3、 Set default：Click “set default”, dome will recover to the default
setting of SCM and camera.
4 、 Dome restart: Click “dome restart”, the program of PTZ and
camera will restart.
3.4 Camera setting
3.4.1 Auto Recovery
Click the menu of “auto recovery”, and then enter the interface
below:
HD IP IR High-speed Dome Camera User Manual
- 33 -
1、Close auto rocker recovery:
In the drop-down list of rocker automatic, choose “close”, the
dome will close the function of auto rocker recovery.
2、Open auto rocker recovery
In the drop-down list of rocker automatic, choose “full open”,
dome will open the function of auto focus recovery and auto iris
recovery. Users can set the interval time of auto focus & iris recovery.
The range is from 3s to 16s.
3、Auto focus recovery
In the drop-down list of auto focus recovery, choose the focus
option and dome will open the function of auto focus recovery. Users
can set the interval time of auto focus recovery. The range is from 3s to
16s.
HD IP IR High-speed Dome Camera User Manual
- 34 -
4、Auto iris recovery
In the drop-down list of auto rocker recovery, choose the iris
option, and the dome will open the function of auto iris recovery. Users
can set the interval time of auto iris recovery. The range is from 3s to
16s.
3.4.2 Lens Data
Click “lens” and then enter the interface below:
1、 Lens sliding speed: Click the list, users can set the speed of lens
changing. There are 3 modes of lens sliding
speed: High/ Middle/ Low.
HD IP IR High-speed Dome Camera User Manual
- 35 -
2、 Automatic Gain: Click the list, users can set auto gain data. There
are 16 ranges can be chosen from -3db to 28db.
Users can set different levels to adjust the
brightness during nighttime.
3 、 Min.Focus distance: Click the list, users can set the level of
min.focus distance. There are 5 different
levels can be chosen:1cm、10cm、30cm、
1m、1.5m. Users can choose the suitable
distance according to the installing
environment.
4 、 Day/night switch: Users can choose the switch mode in the
drop-down list.
Auto: Camera can choose day mode or nighttime mode
automatically according to level of IR sensor.
Day： In this mode,. Camera is compelled to show the picture like
the daytime. Picture is colorful even in nighttime.
Night： In this mode, Camera is compelled to show the picture like
the nighttime. Picture has no color even in daytime.
HD IP IR High-speed Dome Camera User Manual
- 36 -
3.4.3 DSS
Click the button “DSS” and enter the interface below:
Attention: This dome cannot support DSS setting.
3.4.4 AE Mode
Click “AE mode” and enter the interface below.
1、AE mode ： Choose “auto mode” in the list, camera will exposure
automatically according to light of outside
environment.
HD IP IR High-speed Dome Camera User Manual
- 37 -
2 、 Iris: Choose “iris”, the camera will exposure according to the
information of iris.
Attention: This camera can only support two modes: AE Mode & Iris. It
cannot support shutter or gain mode.
3.4.5 AWB
Click “AWB” and enter the interface below:
1、Auto: camera will adjust the white balance according to information
of outside environment.
2、Manual: Users can adjust the white balance manually according to
the level of red/blue gain.
Attention: This dome can only support two modes: auto & manual. It
cannot support the mode like :auto tracking ,indoor,
outdoor, auto locking.
HD IP IR High-speed Dome Camera User Manual
- 38 -
3.4.6 BLC
Click “BLC” and enter the interface below:
Attention: This dome cannot support BLC at present.
3.4.7 Image setting
Click “image” and then enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 39 -
1 、 Image color: Users can set the brightness/ contrast/ saturation/
sharpness to adjust the data of image.
2、Horizontal mirror: Users can choose it to change the imaging status
become horizontal mirror.
3、 Vertical mirror: Users can choose it to change the imaging status
become vertical mirror.
4、Day gamma: Users can choose the level of daytime gamma from the
list. The range is from 0 to 5. The default gamma is 3.
The bigger the gamma is, the darker the image is. The
smaller the gamma is, the brighter the image is.
5、Night gamma: Users can choose the level of nighttime gamma from
the list. The range is from 0 to 5. The default
gamma is 1.The bigger the gamma is, the darker the
image is. The smaller the gamma is, the brighter the
image is.
6、Camera NG: Users can choose to open or close.
7、Video mode: There are 2 modes for users to choose: 25P & 30P.
8、 Set image default: Users can recover the default information of
brightness, contrast, saturation, sharpness,
horizontal mirror, vertical mirror, day
HD IP IR High-speed Dome Camera User Manual
- 40 -
gamma, night gamma.
4 IP Function
4.1 Log in
4.1.1 Device log in
Firstly, set the IP address segment of PC the same as the Device's.
For example, the device IP address is 192.168.1.217, gateway
192.168.1.1. PC IP address should be 192.168.1.XX, gateway
192.168.1.1.
Open the IE browser, input default IP address in address column,
or visit through domain name if the domain name analytic function is in
use, input domain name will display log in dialog box, as the picture
below. If user is not sure of the device address, can search it by using
searching tool or client side software.
HD IP IR High-speed Dome Camera User Manual
- 41 -
Original Status:
Default Address 192.168.1.217
User Name admin operator user
Password admin operator user
Attention: use default user name to log in successfully, then the
user will have authorization for all kinds of operations. It's suggested
that user to modify password after first log in for security.
Click or can switch language
For using this software for the first time will need to do below
setting in IE.
For first use user, he needs to install OCX Active X, or can't view
video. Click Download OCX file for installation. After successfully
downloading, click OCX icon for installation, below page will be
shown up:
HD IP IR High-speed Dome Camera User Manual
- 42 -
Click “install”, and the interface is like below：
HD IP IR High-speed Dome Camera User Manual
- 43 -
After installed, the interface will show like below:
Click “finish” and the web browser active has been installed.
Input the user name and password, then logged into the IE
interface of dome camera.
4.1.2 Home Page Instruction
After log in, users will enter the IE homepage, as below:
HD IP IR High-speed Dome Camera User Manual
- 44 -
4.1.3 Home Page Instruction
1、Tool Bar Instruction
Play setting: set the video fluency and connecting type of video
type.
Talk back: users can talk back to controllers at real time.
Local manual record: save the real time video & audio to local
PC.
Local manual snap: save the image to the local PC. (the default
path is C:\IP Camera\snapshots\,users can modify it in local set).
Alarm status: show the present alarm status.
HD IP IR High-speed Dome Camera User Manual
- 45 -
Amplification：Amplify the area which users chosen.
Full screen: video become full screen.
3Dpositon：Show the 3 D positioning function.
PTZ menu exchange: show the PTZ menu in the left or right.
PTZ show/hide: show or hide the PTZ.
2、Illustration for video form
HD IP high speed dome camera support dual code stream output.
Main code stream of 720P supports: 720P/ D1. Sub code stream
supports: D1, CIF, QCIF. Main code stream of 1080P supports: 1080P
/720P/D1. Sub code stream supports: D1/ CIF/ QCIF. Generally
speaking, 1080P/ 720P/ D1 is used in LAN, CIF is used in WAN, QCIF
is used in mobile phone monitoring. Users can choose different form
per different needs.
HD IP IR High-speed Dome Camera User Manual
- 46 -
4.2 Video record
Click “video record” and enter the interface below:
In this interface, users can search and replay the local and device
end video, including manual recording, timing recording and alarm
recording.
1、Search record: users can search the record according to time and
type. Select the record date, input the start time ,end
time and record type, which includes local record
and device end record. Each type of record includes
alarm record, timing record (not support through IE
browser) and manual record. Click “search” and the
selected video will show on the searching list.
HD IP IR High-speed Dome Camera User Manual
- 47 -
2、 Play video: choose the file, click “play” or double click the file.
The video will show on the right screen.
Double click the screen, and it can exchange between single screen
and split screen.
The toolbar on the screen can support pause/stop/speed up/speed
down/snap/play by order/open audio/close audio.
4.3 Log out
Click “log out”, IE browser will log out the present operation
interface, and return to the log in interface.
4.4 System setting
4.4.1 Basic information
Click basic information and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 48 -
This interface shows the device name, device mode, device SN,
kernel version, server version, web version, OCX version.
1 、Device name: show the name of device. Users can modify it and
click “save”, the new name will be saved.
2、Device mode: show the type of device.
3、Device SN: show the serial number.
4、Kernel version: show the version of kernel.
5、Service version: show information of the software service version.
6、Web version: show the information of web version.
7、OCX version: show the OCX information of IE browser.
4.2.2 Time setting
Click “time setting “and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 49 -
Users can choose time zone, adjust date and time.
1、Zone setting: choose the local time zone, and clicks” save”.
2、Date setting: date can be matched with PC, click “sync with PC”
and click “save”.
3 、 NTP setting: choose “sync with NTP”, the system time will be
matched with internet time server.
4.2.3 System operation
Click “system operation” and enter the interface below. Users can
set the information like timing restart, return to default.
1、 Auto reboot: Users can set the auto reboot time.
Click “effective time”, set the reboot time, it can be every day or
someday in a week, and click save.
HD IP IR High-speed Dome Camera User Manual
- 50 -
2、Set default: Default all the setting.
3、Reboot: Auto reboot the machine.
4.2.4 System update
Click “system update” and enter the interface below. Users can
update the network program.
System update: click “浏览” and choose the path of target file, and
click “ confirm”.
Users can update the software and become the newest version.
Attention: do not cut off the power supply and operate the dome
when updating,
HD IP IR High-speed Dome Camera User Manual
- 51 -
4.2.5 Users manage
Click “users manage” and enter the interface below. It can add or
delete users.
1. Password authentication
When open password authentication, users need to input the user
name and password . When it is closed, users can log in without user
name and password.
2. Password setting
Users can add/ delete the information of users, modify
password ,add new user groups.
HD IP IR High-speed Dome Camera User Manual
- 52 -
1、 Add: input the user name and password, choose the group, click
“add”, the system will remain “add successfully”, and the
new users will show on the user list.
2、Delete: choose the users can click “delete”, the system will remain
“delete successfully”, and the users will move away from
the user list.
3、Modify: choose the users, modify the password, click “modify” and
system will remain “modify password successfully”.
4.2.6 System state
Click “system state” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 53 -
Choose the refresh interval or click auto refresh, the machine will
auto refresh the system status.
The system status information:
N.1: CUP using status.
N.2: clock information of CUP frequency.
N.3: status of system memory.
N.4: using time of machine after power on.
N.5: standing time of system start.
N.6: the information of system UPNP.
N.7: ROUTE information.
N.8: DNS sever information.
N.9: the number of video stream connected to the machine.
HD IP IR High-speed Dome Camera User Manual
- 54 -
4.2.7 System log
Click system log and enter the interface below:
Choose the log type, and users can look into the system log.
Choose the page number, and users can look into the system log.
4.2.8 SCM update
Click “SCM update” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 55 -
Click “ 浏 览 ” and choose the SCM and camera program , click
confirm. Do not cut off the power supply and do not have any operation
when upgrading.
4.3 Network setting
In this part, users can set the information like: Ethernet setting ,
DNS setting, FTP setting, mail server setting.
4.3.1 Ethernet
Click “Ethernet” and enter the interface below. Users can set the
details.
Users can set the network data , including DNS address, IP address,
sub net mask , gateway.
MAC address is the physical address which can not be modified.
HD IP IR High-speed Dome Camera User Manual
- 56 -
DHCP Setting: choose “on” and the machine will get the network
data automatically from local network. This need to support by DHCP
server, please conform to the network administrator.
4.3.2 PPPOE
Click “PPPOE” and enter the interface below:
When setting auto dialing, users need to turn on the switch, choose
the type of gateway, input the user name and password, then click
“save”.
4.3.3 DDNS setting
Click “DDNS” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 57 -
DDNS can map the dynamic IP address to a fixed domain name.
Users need to turn off the switch when setting DDNS.
Choose the DDNS service provider: 3322/org/9299.org. Input
DDNS user name and password, and click “save”.
4.3.4 Net port
Click “port” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 58 -
1、WEB port: used for logging in the interface of IE.
2、FTP port: used for FTP uploading and downloading.
3、RTSP port: real time video stream to transport video.
4、Talk back port: used for talk back.
5、Update port: used for program updating.
6、UPNP switch: auto mapping for port.(need to supported by router).
4.3.5 Email setting
Click “email setting” and enter the interface below:
Email data: set the data of email server, user name and password.
4.3.6 FTP setting
Click “FTP client setting” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 59 -
FTP data: input server name, user name, password, FTP path and type
of uploading, click “save”.
4.3.7 Network setting
Click network setting and enter the interface below. Users can test
the present network status.
HD IP IR High-speed Dome Camera User Manual
- 60 -
IP diagnostic parameters setting:
IP address or domain name: input the address of testing server.
Such as 192.168.5.155.
Number of Ping package: input the number data package during
testing.
Input of every package.
Check result: input the right parameters and click “send”, the
diagnostic parameters will show after a few seconds.
HD IP IR High-speed Dome Camera User Manual
- 61 -
4.4 Audio and video
4.4.1 Video channel
Click “video channel” and enter the interface below:
Users can choose different video path according to different type
of network.
HD IP high speed dome camera support dual code stream output.
Main code stream of 720P supports: 720P/ D1. Sub code stream
supports: D1, CIF, and QCIF. Main code stream of 1080P supports:
1080P /720P/D1. Sub code stream supports: D1/ CIF/ QCIF. Users can
open or close the two code stream, and set the relative data. There are 3
mode of video play: smooth, middle, real time. The type of connection
can choose TCP or UCP.
HD IP IR High-speed Dome Camera User Manual
- 62 -
4.4.2 Video parameter
Click “video parameter” and enter the interface below. Users can
set the basic subtitle,extend subtitle, video mirror.
1、basic subtitle
In this interface, users can set the information of name, time and
code rate.
HD IP IR High-speed Dome Camera User Manual
- 63 -
users can choose the information to show or hidden. Include : title,
time, code rate.
If users want to show the title, fix the information and click
“save”.
Attention: the title no more than 12 characters.
The color of character can be set from: white/ black/ auto.
2、Extend subtitle
There are 5 extend subtitles for users to set.
Click extend subtitle;
Set the X coordinate and Y coordinate of subtitle;
Set the subtitle information;
Clicks “save”.
The extend subtitle will show like the picture below:
HD IP IR High-speed Dome Camera User Manual
- 64 -
The letter in the red box is the extend subtitle.
3、video mirror
Click the video mirror and enter the interface like the picture
below:
HD IP IR High-speed Dome Camera User Manual
- 65 -
Users can set the video mirror in 3 modes: horizontal/ vertical/
diagonal.
4.4.3 Video setting
Click “audio set, users can set the volume of audio input /audio
output.
After setting all the information, click “save”.
If users want to recover to factory default, click “default”.
4.4.5 Extend setting
Click “extends setting” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 66 -
In this part, users can choose code size, code profile, code level,
and click “save”. Users also can choose to open or close BNC
4.5 Vedio capture
In this interface, users can set the information of front end &
remote recording.
4.5.1 Front end record
Attention: this function can only be achieved when remote recording or
there is TF card in dome.
1. Timing record setting
Users can set the auto recording time in time setting schedule.
Use the mouse to choose the time area, the color of chosen is
orange.
Attention: if click “Sat”(or Mon, Tues,etc), the whole day will be
chosen and become orange. If click “all”, the whole week
will be chosen and become black.
After choosing the time, clicks “save”.
HD IP IR High-speed Dome Camera User Manual
- 67 -
2. Video manage
Set the max. Recording time. The front end recording time is from
1 minute to 15 minutes. And set the dick full strategy (stop recording or
delete old file.)
Set the length of alarm recording. There are 5 types of alarm auto
recording:1080P/ 720P/ D1/ CIF/ QCIF. Users can choose the suitable
type according to main code stream and sub code stream.
Strategy for reserve disk space:
a. Min. space:50M; max. Space: 5G, default space:*2%.
b. Support multi type of recorder at the same time (e.g. Samba, TF
card), only when one recorder is full and turn to another to storage.
c. The machine will stop recording or delete old file only when all the
storage space is full.
HD IP IR High-speed Dome Camera User Manual
- 68 -
Only when the front end space is bigger than reserve space, the
camera will operate front end recording.
Click “start record” and the status of recording is “manual record”,
system start record. Click “stop record” to stop recording.
When set timing recording, system will record automatically. This
status is “timing record.”
When the portable storage device is connected to the machine,
users can download it from PC. There are two modes:
HTTP download: users an use the mode of HTTP to download the
file to local disk.
FTP download: users can use the mode of HTTP FTP to download
the file to local disk.
Download: users can use the way of FTP to download the file to
local disk.
Click: “snap picture”, users can save the present picture local
dick..
HD IP IR High-speed Dome Camera User Manual
- 69 -
4.5.2 Remote record
Click “remote record” and enter the interface below:
This function supports users use storage device in network as a
front end device.
1. NFS setting (not support at present)
Switch of remote record: open or close the function o f NFS
remote recording．
Remote path: input the address of NFS.
User name: input the user name of NFS.
Password: input the password of NFS remote recording.
2. SAMBA setting
Remote recording switch: open or close the SAMBA remote
recording function.
HD IP IR High-speed Dome Camera User Manual
- 70 -
Remote path: input the address of SAMBA.
User name: input SAMBA address.
Password: input he SAMBA remote recording password.
4.5.3 Disk status
Click disk status and enter the interface below:
If use TF card, the information of it can be show in this part.
Include dick area, total space, the used space, the remaining, and the
percent of used space.
“Format” is used for formatting the storage space of the device.
4.6Alarm setting
In the interface of alarm, users can set the detail alarm information
HD IP IR High-speed Dome Camera User Manual
- 71 -
of front end device.
4.6.1 alarm setting
Click “motion detection”, and enter the interface below:
Motion detection data: users need to click “enable motion
detection”, and set the sensitivity data. The range of sensitivity is1 ～
100.(The bigger the more sensitive). Then, choose the alarm time
schedule: click “select”, push “Ctrl” and use mouse to select the time
area. Click “show” and the detection area of time will show, choose
“delete”, the time area will be deleted.
Move detection time schedule: set the time schedule of front end
device. This can be linked to front end device. (Include front end device
recording, send email, FTP upload).
Attention:
HD IP IR High-speed Dome Camera User Manual
- 72 -
When selected San (Mon/Tues/Wens/Thur/Fri/Sat), the color will
be black.
Click “all”, all the color will be orange.
Clicks “save”.
4.6.2 Video loss
Click “video loss” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 73 -
Sensitivity of video loss: click “enable” and set the sensitivity
data.( 1～100,the bigger the data is ,the more sensitive
Video loss alarm schedule: set the time schedule, it can be linked
to alarm when video is lost in front end device. (Include front end
recording, send email, FTP upload).
Attention:
When selected San(Mon/Tues/Wens/Thur/Fri/Sat),the color will be
black.
Click “all”, all the color will be orange.
Click “save” and the interface is below:
4.6.3 Link attr
Click :kink attr” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 74 -
Alarm center parameter: input the center address and center port,
click Alarm output data”: set the information of present output status
and alarm status. Users can set the holding time o f alarms. Clicks
“save” after setting the data.
4.6.4 Alarm linkage
Click “alarm linkage” and enter the interface below:
HD IP IR High-speed Dome Camera User Manual
- 75 -
1、Alarm time interval: the interval of alarm recording and snap.
2、FTP uploading: choose the file type of uploading: picture & video.
3、Motion detection: include alarm center, email, alarm output, front
end record, FTP upload, play sound, capture,；
4、Video loss: include alarm center, email, alarm output, front end
record, play sound.
Simulate alarm: use mouse to click and putout alarm signal.
Attention: if the file type of FTP is video, please make sure that the
device has connected with front end storage device, and
click the matched front end recording choice.
4.7local setting
In the interface of local setting, users can set the information of
HD IP IR High-speed Dome Camera User Manual
- 76 -
record/pre record/alarm linkage recording. Like the picture below:
1、Record setting:
choose the recording time and choose the storage path.
2、Pre record setting:
start the recording function in IE when PC start alarm recording.
3、Alarm linkage record:
choose alarm linkage record, it will start record when alarming.
Set the recording time.
Clicks “save”.
HD IP IR High-speed Dome Camera User Manual
- 77 -
FAQ
1. Can Not Visit Via Browser
Possible Reason(1): Internet is not connected
Solution: Connect the PC to internet and check if it can
normal work, get rid of cable and virus
problem, till can ping to PC.
Possible Reason(2): IP address is being occupied by other devices
Solution ： Connect the camera to PC and reset a new IP
address
Possible Reason (3): Camera and PC IP address not in the same
segment
Solution： Set them to the same segment
Possible Reason(4): Camera breakdown
Solution: Return for repairing
2. Can Not Control Camera via IE
Possible Reason （1 ）: Ensure if the settings of address, protocol and
other parameters in 'Serial Port' are coordinate
with the camera dial-up.
HD IP IR High-speed Dome Camera User Manual
- 78 -
Solution: Check the camera protocol, bit rate and other
parameters in 'Serial Port' and set them right.
Possible Reason(2): Camera breakdown
Solution: Return for repairing
Loading...