XL-DM317G
User manual
Contents
Chapter I Summary and System Structure .......... 1
1. Summary ...................................................................... 1
2. Checking the Package .................................................. 2
3. Safety Warning and Attentions ....................................... 4
4. General Operation Standards and Attentions ................ 6
4.1. Operation Standards ................................................ 6
4.2. Attentions .................................................................. 7
5. Structures and Functions .............................................. 9
6. Instructions of Fixed Icon Display Area ..................... 16
7. Charging Battery Icon ............................................... 17
8. Install TF Card ........................................................... 17
9. Install UIM/SIM Card ................................................. 18
10. Battery Usage ......................................................... 19
11. Main Specification of the Equipment ....................... 22
Chapter II Specifications and Functions ......... 23
1. Technical Specifications ............................................. 23
1.1 Rf Performance Index .......................................... 23
1.2. xDSL Index (optional) ........................................ 23
1.3. Optical Power Index (optional) ........................... 24
1.4. Visual Fault Locator (optional) ........................... 24
2. General Functions .................................................. 25
2.1. On/Off ................................................................ 26
2.2. Standby and Wakeup ............................................. 25
2.3. Table Management ............................................. 26
2.4 Open / Close net card ......................................... 30
2.5 PPPoE dial .......................................................... 31
2.6 Task Manager ...................................................... 32
2.7 Dialer ................................................................. 33
2.8 Answer the phone ............................................... 34
2.9 Input Method ....................................................... 35
2.10 Flashlight .......................................................... 38
2.11 Camera ............................................................. 38
2.12 Breathing indicator ............................................ 38
2.13 Mass storage mode .......................................... 38
2.14 Headset ............................................................ 40
2.15 Vibration ............................................................ 40
2.16 GPSone Passive positioning ............................. 41
2.17 WIFI hotspot ...................................................... 41
Chapter III Usage of Main Functions ............. 43
1 Test Functions ............................................................. 44
2. SN Code ................................................................... 66
3. Test Setting ................................................................ 68
4. Records ..................................................................... 73
5. Read Serial ............................................................... 74
6. Control of the electric quality and wireless dial ......... 75
7. Web ........................................................................... 77
8. Dialer ......................................................................... 79
9. Contacts .................................................................... 80
10. Messaing ................................................................. 82
11. Clock ....................................................................... 83
12. Calendar ................................................................. 85
13. Settings ................................................................... 86
14. Camera ................................................................... 94
15. Gallery ..................................................................... 96
16. My Files ................................................................... 97
17. Calculator .............................................................. 100
18. Video ..................................................................... 100
19. Music ..................................................................... 101
20. Recorder ............................................................... 103
21. Downloads ............................................................ 104
22. G-Sensor Calibration ............................................ 104
23. How to Install and Uninstaill Software ................... 105
24. How to Install the USB Driver ............................... 107
Chapter IV Usage and Maintenance ............... 110
Chapter V Faults and Solutions ..................... 112
Chapter VI market ........................................... 115
1. Summary ................................................................ 115
2. Components ............................................................ 115
3. Usage of Main Functions ........................................ 116
3.1 Download software package ........................... 116
3.2 Installation and Update ................................... 119
3.3 Remarks ........................................................... 120
3.4 Feedback .......................................................... 121
4. Trouble Shooting ...................................................... 123
Chapter VII The Instruction of Program
Installation after Resetting ...... 125
XL-DM317G Multi-service Access
6
Chapter I
Summary and System Structure
1.
Summary
XL-DM317G is designed for meeting entire
network
requirement, whose functions including WFMS processing,
wireless signal collection, GPS positioning, xDSL test, LAN test,
optical power test, visual fault locator, tracing and PDA. XLDM317G has wireless voice and communication module, which
can logon Internet through wireless network, and finish the
task quickly. Meanwhile, collecting all kinds of specifications
of wireless signals, upload to server, achieve some test
functions. And also test all kinds of xDSL line (xDSL includes
ADSL, ADSL2, ADSL2+, READSL etc.),
LAN test. It not only can test xDSL physical layer
parameters to confirm whether the line is proper to provide
xDSL service or not; but also evaluate the quality of the
service you provide. The tester can emulate the user’s PC to
test broadband IP line or perform PPPoE dial through user’s
Modem in order to test the connectivity of IP network and the
problem of user’s Modem or eliminate malfunctions that leads to
failing logon Web Pages caused by user’s PC. XL-DM317G
adopts 480*800 TFT IPS true color LCD resistive touch
screen, and embedded with Android 4.1.2 JB operation system.
It is easy to operate and check the test
XL-DM317G Multi-service Access
7
results. It can meet the installation and maintenance
requirements of wireless device, xDSL access, LAN access
and optical access and so on. Meanwhile, it’s a powerful
tool for improving the efficiency of maintaining Internet.
Standard Accessories:
Please make sure all the following accessories are in
good condition:
Charger Direct Ethernet Network line
USB data line Touch Pen
Touch pen rope Carrying Bag
XL-DM317G Multi-service Access
8
User Manual
Other Accessories:
(It is different due to different modules.)
Test Line USB inverting power line
Tracing receiver Belt
2.
Safety Warning and Attentions
In order to use the tester safely and efficiently, please
read the following information before using.
➢
Please use the tester according to the rules when you
in the hospital.
XL-DM317G Multi-service Access
➢
Please keep far away from the precision instrument
➢
Do not use chemical solvent to clean the equipment.
➢
Do not throw away the waste battery. Put it into the
battery recycling bins.
➢
Please do not use or store the equipment as well as its
accessories under the environment of high temperature, low
temperature, high humidity or dust.
➢
Please put the equipment and its battery in a safety
place and avoid strong shake and impact.
➢
When use the equipment for the first time, please
charge the battery completely.
➢
Don't disassemble the equipment by yourself. If you
need, please go to the appointed professional organization
to mend it.
➢
Please put the equipment and its accessories in the
place out of children’s reach.
➢
Please take care of the UIM card and avoid static,
scratch, as well as bending.
➢
Please use the original accessories of the product.
➢
Please use the standard battery, charger and other
accessories. We will not be responsible for anything if you
use the accessories from the third party.
➢
Same as other mobile equipment, with built-in antenna
on the bottom of the product, there is some radiation and
interface of this product. If you want to operate the product
in light-hearted, as well as take of your personal safety, any
part of your body do not too close to the antenna.
5
➢
Please use the equipment within network coverage
range.
➢
The LCD display effect will change a little in the
temperature severely-changed and long-time conversation
environment.
3.
General Operation Standards and
Attentions
3.1. Operation Standards
➢
Test Interface
Please firstly connect the test cord to test interface and
then connect to the test line. Please don’t touch the metal
pars of clamps to avoid the high dangerous voltage.
➢
USB port
Please do not short the port with metal; otherwise the
internal circuit will be damaged.
➢
Cleaning
The shell of this instrument is mainly made of plastic,
when cleaning, use dry and soft cloth, and do not use
volatile chemicals, otherwise, it will cause discoloring and
deformation.
➢
Protecting the case and operating panel
Do not pour volatile agents on the case or operation
panel, and avoid prolonged contacting with rubber and PVC;
otherwise, it may result malfunctioning.
6
7
➢
When moving the instrument
Please make sure the power cord and connection
cables are removed before shift the instrument. And unplug
all the connecting cables from socket after using.
➢
When the instrument is unused for a long time
If the instrument is unused for a long time, the battery
characteristics may have deteriorated. And it will also take a
longer time to charger. If it take a very short time to charger
and the operating time is extremely short, please replace
the battery.
➢
Faults
If there are strange sound, smell, or smock coming
from the instrument, please turn off the instrument and
unplug of the power, and then contact with us immediately.
3.2. Attentions
➢
Please charger the battery full when using it for the first
time as well as each time.
➢
Please use touch pen and click the screen gently to
operate function keys, do not click it roughly, otherwise, the
LCD may be damaged.
➢
If there is any abnormal phenomenon during the
process of operating, please turn off and restart it.
➢
Please don’t put the instrument under the strong direct
sunlight or put it near the origin of heat. Or else, there will be
bad effect to internal circuit as well as the shell.
➢
Condensation may occur if the instrument is moved to
another place where the temperature is higher or the room
8
XL-DM317G Multi-service Access
temperature change rapidly. In such situation, let the
instrument adjust to the new environment for at least one
hour before using the instrument.
➢
Using the instrument near strong magnetic field
sources will have adverse affects on the internal circuit of
the instrument. That because the electromagnetic wave
from the mobile may effect the normal identification. If you
are using a portable phone to transmit measured data,
move the portable phone at least 1m away from the
instrument.
9
XL-DM317G Multi-service Access
4.
Structures and Functions
10
XL-DM317G Multi-service Access
NO Name Functions
1
Optical power
port
Connect with the fiber interface,
can be used as optical power
meter
2
VFL port
Connect with the fiber interface,
can be used as visual fault
locator.
3
Dust-proof cap
of optical port
Protect the optical port from dust
and water
11
XL-DM317G Multi-service Access
4
Scanning Head
Window of bar code scanning
engine, which is used to scan the
bar codes.
5
Dust-proof cap
of electric port
Protect the electric port from dust
and water
6
Ethernet port
The port to connect with Ethernet
7
Dust-proof cap
of USB
Protect the USB port and
Headphone from dust and water
8
USB Port
It is used to connect with PC or for
charging
9
Headphone
Jack
Connect the headphone
10 RJ11 port
Connect with telephone line to
test xDSL
11
Receiver
Receiver of the equipment
12 Indicator
It is used to indicate the
conditions of the equipment
13
Display screen
Display of the screen
14 Keyboard
Please refer to the following
instructions for more details.
15
Reset
Reset operation
16
MIC
MIC Hole
17
Touch pen
Touch pen of the equipment
18 Hand Belt
It is used for holding the
equipment.
19
Battery Cover
It is used to fix the battery
12
XL-DM317G Multi-service Access
20
Battery Cover
Screw
It is used for fix or loose the
battery cover
21
Fixed groove of
the hand belt
It is used to fix the hand belt.
22
Loudspeaker
Loudspeaker hole
23
Camera
Make a photo or video.
24 LED light
LED light also can be used as
flashlight.
25
RFID side key
RFID hotkey
26
Scan side key
Scan hot key
27 Volume key
Adjust volume of phone call or the
loud speaker.
Cable Tracing Receiver（It depends on the real item）
Number
Name
Function
1
Receiver probe
Antenna probe
2
Test button
Press it to test the signal
3
Loudspeaker
Audio signal generator
loudspeaker
13
XL-DM317G Multi-service Access
4
Switch and volume
adjustment key
Turn it down to increase the
volume and turn it up to
decrease the volume
Buttons:
Buttons
Name
Functions
Power button
Under power-on state, shortly
pressing the button can close
or light the screen; long
pressing the button can pop
up an operating menu of
"Device Options". Under
power-on state, long pressing
the button can close the
tester.
Return Button
Return back to the previous
page.
Main Screen
Button
Pressing this button to return
back to the main screen
window.
Menu Button
Under main screen interface
and application program
interface, pressing this button
can pop up the operating
menu.
Light Button
It is used to open the
flashlight.
14
XL-DM317G Multi-service Access
Camera
Button
Long pressing the button to
enter into camera interface,
and shortly pressing enter into
photo interface
Hang up
Button
When a call is coming, it can
hang up the call.
Dial/Answer
Button
Dial or answer the phone;
under standby condition,
pressing this button to enter
into call records.
Delete Button
When input text, it is used to
delete words before the
cursor.
Number
Button
It is used to input the
numbers.
Bar Code
Scan Button
Shortly pressing the button
can start to scan the bar code.
RFID Scan
Button
Shortly pressing the button
can start to scan the RFID
label.
Volume
Adjust Button
Can adjust the volume for
calling and louder speaker; up
is louder and down is lower.
Indicator lights:
The meaning of the 4 indicator lights from left to right is as
15
XL-DM317G Multi-service Access
following:
Indicator light 1: Mobile phone light, indicating the mobile
state, which have 3 glittering state.
1) Normal state: 0.5s on, 4.5s off
2) Incoming call state: 0.5s on, 0.5s off
3) Receive the message or missed call: 0.5s on, 1.5s
Indicator light 2: Unused
Indicator light 3: xDSL Link indicator; when it is in
activating mode, the indicator will glitter; when it is activated,
it will always light.
Indicator light 4: VFL and Cable Tracing indicator; when
the VFL or cable tracing signal is open, this indicator will
light.
Standby shortcut icon is as following:
: Click to enter into main menu interface.
16
XL-DM317G Multi-service Access
: Click to enter into dialing plate interface.
: Click to enter into message interface.
: Click to enter into browser interface.
: Click to enter into contacts
5.
Instructions of Fixed Icon Display Area
Display the current signal intensity of CDMA network
and EVDO: the more column bar is, the better the
signal intensity will be; means there is
no
Display the current signal intensity under roaming
condition: the more column bar is, the better the
signal intensity will be; × means there is no signal.
Means that there is unread multimedia message
Means the signal intensity of the WLAN.
Means Bluetooth function has been opened.
Means uploading or downloading documents
Means that there is unread short message.
Means that there is unread short message.
Means it is in the flight mode.
Means the USB connection
17
XL-DM317G Multi-service Access
Means that the alarm clock has been set.
Means that TF card has been inserted
equipment.
into
the
Means that TF card hasn't been inserted
equipment.
into
the
Means the current battery power.。
Means the battery is charging
Means it is on the phone
Means there is missed call.
Means it is using data service currently.
Means it is under silent mode.
Means the network card is open.
Means the PPPoE link has been built.
Means GPS is open.
6.
Charging Battery Icon
: The battery is in low power and needs to charge.
: The battery is charging and displays in motion.
: The battery has already been full.
7.
Install TF Card
Open the battery cover, take down the battery, and
18
XL-DM317G Multi-service Access
insert the TF card into the slot, when there is a slight sound
of clicks, the buckle will seize up the card automatically, and
installation work is finished, please see the following:
Uninstall TF card: Push the TF card, when there is a
slight sound of clicks, the card buckle has loosed, and the
TF card will pop up automatically.
8.
Install UIM/SIM Card
Open the battery cover, take down the battery, put the
UIM/SIM card into the top slot, make sure the chip side
down, and push it into the bottom of slot, as following:
19
Notice:
Insert CDMA/EVDO UIM card for EVDO edition; and
the GSM/WCDMA SIM card for WCDMA, Please insert the
corresponding card for different mode to keep the phone
function.
9.
Battery Usage
Install battery
Firstly, unscrewed the two screws, remove the battery
cover;
Insert the battery and make the battery metal sheet well
connected with the contact point, and then press the lower
end of the battery.
When remove the battery, pull the scotch tape on the
battery upward, the battery can be removed easily.
Then cover the battery cover and tighten the screw with
corn or screwdriver at clockwise. The installation is finished.
Please make sure the installation of battery is right before
start the equipment.
■
Notice: Please close the tester before removing the
battery.
■
Please follow the above procedures.
■
Please tighten the screws for the battery cover, in case
the battery fall out when the equipment is dropped.
Battery performance
The standby time will be affected by system
20
6000mAh(Standard Battery)
Standby Time*
About 600 hours
Talking Time*
About 9 hours
environment, system setting, service test, taking photos and
using data service.
Calling or opening a backlight will consume more power
than standby and standby time will shorten.
The standby time of no service area will be short than
the normal standby time.
The battery performance will change with the charging
status, temperature, local network as well as the
background light status.
More accurate time will depend on the local network
status, using conditions and equipment card.
Charging:
Insert the charger into the charger port of the
equipment.
Insert the charger into the power socket with 100~240V,
50/60Hz. When it is charging, the battery power icon on the
screen will shine; after charging finished, the battery power
icon on the screen will stop shining.
After charging finished, pull the charger out of the
equipment and then pull the charger out of the power
socket.
Charging time
If the AC voltage is very low, you should charge the
battery in a long time.
XL-DM317G Multi-service Access
21
The charging time is about 7~9 hours. (More accurate
time will depend on the battery condition.)
The environment temperature of normally charging
should be 0℃~40℃. Charging under below 0℃ or above
40℃, the battery performance will descend and the battery
life will shorten. When charging under too high or too low
temperature for a long time, it will cause damage to the
battery. For example, the battery can't charge fully and
cause the battery inflation.
It will lengthen the charging time to use nonstandard
charger.
It will also lengthen the charging time to operate the
tester when charging.
Note:
■ You should fully charge the tester before the first usage;
please disconnect the charger in time after charging finished
because the long-time charging will damage the battery
performance.
■ Please guarantee that the battery is inside of the tester.
■ When it is not charging, please take the charger from the
outlet.
■ When it is charging in very low battery, the tester will not
start immediately and will display low battery prompt if you
do booting operation. After charging for a while, the tester
will start normally.
■ Charger is safety device, please use our specialized
charger. Meanwhile, please be careful during the usage.
XL-DM317G Multi-service Access
22
10.
Main Specification of the Equipment
➢
It adopts 480×800 TFT IPS true color touch screen
➢
It adopts the built-in Android 4.1.2 JB operation system.
➢
It supports CDMA 1x, EVDO Rev.A 800MHz/1900MHz;
also supports voice and data service. (XL-DM317GE)
➢
It supports WCDMA/HSDPA/HSUPA 850/1900/2100
MHz and GSM/GPRS/EDGE 850/900/1800/1900MHz,
supports voice and data service. (XL-DM317GW)
➢
Rechargeable 3.7V 6000mAh polymer battery and the
max power is 3W.
➢
Can make a phone call in earphone and listen to music.
(needs earphone)
➢
Support 1D bar code scan
➢
Support HF RFID 13.65MHz (optional)
➢
Camera with 5 million pixels and support auto focus
and flash function.
➢
Support flash light function
➢
Dimension: 174mm*83mm*52mm
➢
Weight: 500g
XL-DM317G Multi-service Access
23
Chapter II
Specifications and Functions
1.
Technical Specifications
1.1 xDSL Index (Optional)
1) It can meet the following standards: ITU G.994.1 (G.hs),
ITU G.992.5, ITU G.992.5 Annex L. The max distance which
can be connected is 6.5km. Be compatible with ADSL,
ADSL2 and READSL.
2) It can test the transmission parameters in the DSL line:
◆ Attenuation: 0~63.5dB
◆ Noise Margin: 0~32dB
◆ Upstream Channel Rate (interweaved / fast mode):
0~1.2Mbps
XL-DM317G Multi-service Access
24
◆ Downstream Channel Rate (interweaved / fast mode):
0~24Mbps
◆ The maximum rate and capacity ratio of upstream
Channel and downstream channel.
◆ The modulating bits in the DMT sub-channel: 0~15 and
each sub-channels' frequency points
◆ The number of error codes (CRC, HEC, FEC, NCD,
OCD)
◆ The output power of DSL
◆ It can display every condition of the DSL line: lost of
signal and shutdown of link.
1.2 Optical Power Index (optional)
➢
Wavelength range(nm): 800~1700
➢
Photo-sensing material: InGaAs
➢ Power test range(dBm): -70~+10 (-50~+26)
➢
Error range: ±5%
➢
Display distinguishability
Linear display: 0.1%
Logarithmic display: 0.01 dBm
➢
It has different adapters: FC, ST, SC
1.3 Visual Fault Locator (Optional)
➢
Wavelength: 650nm±20nm
➢
Light source: FP-LD laser
➢
Output power: 1mw/3mw/5mw/10mw (You can choose
the different power value)
25
➢
Connector: 2.5mm universal adapter(SC, FC, ST)
➢
Working mode: CW or 2Hz modulation
➢
Applicable fiber: SM/MM
2.
General Functions
2.1. On/Off
Open the tester
Under the "off "condition and there is electricity in the
battery, long press the power key to start the equipment.
Close the tester
Under standby interface and there is electricity in the
battery, long press the power key to pop up an option menu
and then choose "Power Off" to close the tester.
2.2. Standby and Wake up
Under the "on" condition, the system will enter into
standby state or shortly press on/off key to enter into
standby state. Under standby condition, shortly press on/off
key to wake up the system. (The time entering into standby
is relevant with the backlight time setting in setup options. If
the setting is "Light Forever", the system will not standby
automatically. But you still can realize the standby by
pressing on/off key.)
After waking up, the system will restore to the interface
before the standby and the program will restore to the state
before the standby.
26
2.3. Table Management
There are five default pages of the table screen and it
can display different screens by sliding with finger.
Lock or Unlock
If there is no equipment operation, after some time the
keypad will automatically locked. Press the power button to
wake up the screen, click the lock icon, you can slide in
different directions respectively, into different functional, as
shown below
In main menu "Settings> Display> Sleep" can set time
delay before the device sleep.
Add Desktop Icons
Click to enter menu interface, find out the program
which you want to create a desktop shortcut. Keep pressing
the icon, when icon vibrate, you can move, and then drag
the icon to where you want to let go on desktop (note please
27
XL-DM317G Multi-service Access
keep pressing the icon during the operate)
Delete the desktop icon
Keep pressing the desktop icon, after icon vibrate, the
top of the screen appears "× Remove", move the icon to "×
Remove" place , release after the icon turns red , the target
can be deleted.
Change Wallpaper
Keep pressing the desktop space will pop up the
following menu: Wallpaper, Live wallpaper and Gallery, you
can also set a picture as wallpaper when you browse the
pictures.
System prompt bar
System prompt bar (the top row of the screen) displays
the current notification system (such as unread messages
or missed calls, etc.).
Open the prompt bar: press the screen with a finger
drag down the status bar.
28
XL-DM317G Multi-service Access
Add /Remove desktop plug
To add desktop clock and other desktop plug, you need
to enter the menu, and then click on the widgets, Keep
pressing the icon of plug-ins, plug-in icon vibrate, you can
move, and then drag the icon to your plugin want placement
can let go (note that during the operation to hold the plug-in
icon do not put). As shown below:
29
XL-DM317G Multi-service Access
Quick Uninstall Installed Programs
Enter the menu screen, select the program icon you
want to uninstall, keep pressing the icon, icons vibrate, you
can move, move to the desktop uninstall icon will pop
uninstall interface, click OK to start the uninstall program,
and then click OK to uninstall complete.
30
XL-DM317G Multi-service Access
View program information
Enter the menu screen, select the icon for the program
you want to view, keep pressing the icon, icons vibrate, you
can move, move to the desktop App info, the application will
pop up the relevant information. As shown below:
2.4 Open / Close net card
To open the device's net card, pull down the prompt bar
and click the LAN icon (the icon is blue card means
turned on, the icon is white means closed), the system
pop-up card properties window, as shown below:
31
XL-DM317G Multi-service Access
Select Using LAN, you can choose to open DHCP or
fixed IP mode, the DHCP mode, you can click again to
reacquire to make the device to obtain an IP address from a
DHCP server. In the static IP status, you can modify the
NIC's IP address, subnet mask, gateway, and DNS, DNS is
divided into two, namely DNS1 and DNS2, should first set
the DNS1.
2.5 PPPoE dial
To make the network port PPPoE dial, pull-down
prompt bar, select PPPoE icon (the icon is blue means
PPPoE dial is connected, the icon is white means PPPoE
dial not connected), PPPoE Properties window pops up, as
shown below:
32
XL-DM317G Multi-service Access
In the dial-up interface to enter a user name and
password, click CONNECT can be established PPPoE link.
2.6 Task Manager
Equipment systems have Task Manager, you can close
opened programs to release program memory, improve
system efficiency.
Pull down prompt bar, single click , Task Manager
will appear, as shown below:
33
XL-DM317G Multi-service Access
Enter into a running program menu; click on the Stop
button corresponding to the task, which can close the
current task and free the occupied memory space. (The
Launcher is desktop manager, so it can not be turned off)
2.7 Dialer
In the main menu interface or standby desktop, click
the or enter the phone number, press the call
button or dial button, you can call the number; To end the
call, click the button or press hook key to
hang up. As shown below:
34
XL-DM317G Multi-service Access
2.8 Answer the phone
The system call interface pops up in the caller interface,
slide right to the green icon to answer the call; slid left to red
icon can reject an incoming call; slide up to SMS icon can
send text messages.
35
XL-DM317G Multi-service Access
2.9 Input Method
Click the application's text box; the system will
automatically bring up the built-in input method. As shown
below:
System using TouchPal input method, tap on the
keyboard to switch the input character case. Click on
the keyboard hidden input method. Click will switch
the input
method to Pinyin input method, and then click becomes
English input method. Keep pressing the on-screen
keyboard to the left or right button; it will switch the input
keyboard layout. Click on your keyboard to switch to
36
XL-DM317G Multi-service Access
digital / character input method, which includes English
characters, facial expressions, network, digital, Greek, Latin,
mathematics and other options, as shown below:
Keep pressing the bottom left corner to switch the
input method window pops up as shown below:
37
XL-DM317G Multi-service Access
Where you can select the desired input mode, (You can
also install other input methods, such as stroke, etc.)
devices also support install other input methods, such as,
Sogou input method, Baidu input method.
Change the text input method
In the system settings have language & input options.
Contains all installed input method, as shown above, you
XL-DM317G Multi-service Access
38
can click the check box in front to set the default input
method.
2.10 Flashlight
This device supports flashlight, camera fill light can be
used as lighting in the boot state. Keep pressing (2
seconds or so) can be turned on or off flashlight. (Flashlight
will remain in the standby System standby state before,
please note the close flashlight to save power)
2.11 Camera
This device has a camera shortcut key ,
in the normal state, press the camera button that can
pop up
camera interface, the camera screen, press the button for
the camera operation.
2.12 Breathing indicator
When device in the boot and standby state, breathing
light gap flashes to indicate that the device is in working
condition, in calls or missed calls, received messages have
different breathing light blinking to alert customers.
2.13 Mass storage mode
Mass storage mode is USB data cable connect with the
PC, the device will be a virtual mass storage U disk, via a
39
PC can be copied or deleted U disk file.
Through Mini USB data cable to connect the device
with the PC, the device prompts bar prompts a USB
connection, pull down the prompt bar, click the USB
connection, select USB Mass storage, PC machine will find
U disk, which can be operated via a PC U disk content. As
shown below:
If there is no TF card, will virtual a U disk, if have TF
card, will virtual 2 U disk. (Drive letter will vary on how many
different devices) as shown below:
40
XL-DM317G Multi-service Access
2.14 Headset
Device supports headset, listening to music, the
device's headphones as an ordinary hole, the device is
equipped with a headset plugged into the headphone jack,
that is to meet the needs of calls and listening to music, the
headset supports off-hook and on-hook operation.
(Dedicated headphone headset, other headphones may not
be used)
4
3
1
2
No
Name
Specification
1
plug
3.5mm
2
Hook button
ABS Black
3
horn
φ10 32Ω
4
shell
ABS black sequins plating
2.15 Vibration
Device supports two vibration modes, one is only
vibration, the other is added ringing vibrations. Vibration
mode requires only pull down prompt bar, click until
41
XL-DM317G Multi-service Access
changes in the vibration mode only. You can also press
the power button on the pop-up screen; click the icon
to enter the vibration modes
Ring & vibration modes need to enter the Setting>
Sound to select Vibrate and ring.
2.16 GPSone Passive Positioning
Device supports GPSone passive positioning, you can
through the machine's positioning software to check latitude
and longitude information, passive positioning feature
requires phone cards opened passive location services, and
will produce certain passive localization data traffic. Only
need to open the GPS device side support GPSone passive
position, when the GPS is turned off, the device does not
support GPSone passive location query.
2.17 WIFI hotspot
Portable devices support WIFI hotspot, providing 3G
network links WIFI connection to other devices.
Connect 3G data connection, and then enter
Settings>more, click Tethering & portable hotspot, the
interface as shown below:
42
XL-DM317G Multi-service Access
Select the Portable WLAN hotspot, which you can open
WIFI portable hotspot, through other devices with WIFI
hotspot that can search the AP and connect Login networks.
Click the set up WLAN hotspot; you can set up WIFI hotspot
SSID, security, passwords and other content, as shown
below:
43
XL-DM317G Multi-service Access
Chapter III
Usage of Main Functions
Click on the bottom of the standby screen, pop up
the main menu. As shown below:
Slide left or right to view more menu items, press the
Back button to close the main menu, you can directly click
the application or widget to switch applications and widgets
options. You can also put your own favorite features onto
the desktop, keep pressing the icon you want to move and
hold, after a brief vibration to move, drag it to where you
want the icon placement can let go (Note: during operation
to keep pressing the icon and not loose).
44
XL-DM317G Multi-service Access
1. Test Functions
The test function is professional test software, which
includes xDSL test, Modem emulation, optical power test,
visual fault locator, network layer test, E Netcom, download
meter, FTP client, etc. The customer can choose the
corresponding functions. Test interface picture is as
following:
Please see the details:
xDSL test (optional)
Through inner xDSL Modem, test xDSL line. It includes
Physical layer test, Modem setting and web.
45
XL-DM317G Multi-service Access
Physical layer test can test physical layer parameter,
which including xDSL connection status, connection mode,
Upstream/downstream channel rate, noise margin,
attenuation, the output power, the number of error codes
(CRC, HEC, FEC, NCD, OCD) and channel bits picture.
Using this function can check whether there is problem
in the user line or not, and the user line parameter.
Resolving the problems is due to users' Modem and
computer.
Please see the following picture:
46
XL-DM317G Multi-service Access
Physical layer parameter Error codes statistics
Bits in map Bits in text
The current status means:
Handshake: Shake Hands
47
XL-DM317G Multi-service Access
Discovery: Discover the local DSLAM;
Training: it is training;
Showtime: distal end DSLAM is connected.
Connection mode:
G.DMT: ADSL G.DMT protocol mode, in accordance with
ITU-T G992.1 standard;
G.LITE: ADSL G.LITE protocol mode, in accordance with
ITU-T G992.2 standard;
T1.413: ADSL T1.413 protocol mode, in accordance with
ANSI T1.413 issue1 & Issue 2 standard.
ADSL2/ADSL2+: ADSL2+ G.DMT.BISPLUS protocol mode,
in accordance with ITU-T G992.5.
ADSL2: ADSL2 G.DMT.BIS protocol mode，in accordance
with ITU-T G992.3 standard;
Physical layer parameter:
Activating times: Display the active times from the
beginning of test to the current time, the activation time will
increase one with each active.
Test Duration: Display the time when start physical layer
test after initialization of the Modem.
User can check the current channel bit value in the
channel bit map interface, and the value will be displayed in
graph. User can see the test result in text through pressing
text button.
48
XL-DM317G Multi-service Access
Modem Parameter Setting
Modem parameter setting including Modem mode
setting and VPI/VCI setting.
In Modem setting, can set up Modem working mode
and seven groups VPI/VCI value. Modem mode supports
two modes: ADSL compatible mode and ADSL 2+ mode,
through choosing, you can set up current working mode
(after setting, you should restart Modem).
ADSL2+ Mode: It is standard ADSL2+ mode. The current
connection mode can be automatically chosen according to
local side. ADSL2+ mode is the first choice of the
connection. When local side cannot connect the ADSL2+
mode, will connect ADSL mode automatically, but ADSL
mode is only part compatible with ADSL line.
ADSL Compatible Mode: The ADSL2+ connection mode is
unavailable under such mode.
The seven groups of VPI/VCI parameters which were
set before will be displayed. If it needs to be modified, type
new VPI/VCI value from VPI and VCI bar. Click "Setti", and
the Modem VPI/VCI will be set (can be saved even if power
off)
Note:
If the MODEM Mode is modified as another kind of it,
please exit the xDSL Test and re-enter it again. Otherwise,
the MODE Modifying will not be effective Modem.
Setting picture is as following:
49
XL-DM317G Multi-service Access
Modem parameter setting interface
PPPoE Dial
PPPoE is in the status bar, you can see it pull-down list,
as follows:
50
XL-DM317G Multi-service Access
Click icon, the dialing window will pop up, as
follows:
51
XL-DM317G Multi-service Access
Input the user name and password, click connect to do
the PPPoE dial, the equipment will memorize the user name
and password automatically. User can test the web
browsing.
Internet
When dialing succeeded, click web icon to open the
browser and input the website in the address bar, and then
click the triangle arrow or click OK on the keyboard to enter
into the website. User can test the connectivity of the xDSL
line.
If the other program needs xDSL access, the program
will give hints that exit with or without electricity. Choose exit
with electricity when xDSL is needed for external use and
without for needn’t.
It can also press main menu button, back to main menu,
do PPPoE dial.
xDSL test flow is:
xDSL line quality test—>line exit with power test—>PPPoE
Dial —>network layer test—>application layer test.
Insert telephone line into RJ11 as follows:
52
XL-DM317G Multi-service Access
xDSL test wiring diagram
Entering into xDSL test interface, it can show activation
situation, when line activated, it can show the parameter of
Up/down steam channel rate, noise margin, attenuation, the
output power, the number of error codes (CRC, HEC, FEC,
NCD, OCD) and channel bits picture, it can check all test
parameter when sliding screen. Then press PPPoE dial and
input the user name and password, and then do the landing
page test after finishing dialing.
Modem Emulation
Emulate user Modem, and eliminate user Modem.
When click Modem Emulation, it can open the power of
Modem, and show VPI/VCI, please see the following
picture:
53
XL-DM317G Multi-service Access
The tester will emulate user Modem to realize PPPoE
dial through PC. (If the VPI/VCI value needs to be modified,
please modify it from Modem Parameter window). Tester
can realize PPPoE dial through user Modem emulation, and
check the fault of user Modem. If it needs to exit Modem
Emulation state, please Click Exit! to exit it.
Modem emulation connection is as follows:
54
XL-DM317G Multi-service Access
Optical power test (optional)
Optical power test can test the power of optic fiber,
please see the picture:
55
XL-DM317G Multi-service Access
There are six wavelengths as calibration wavelength,
choose corresponding wavelength can test current optical
power value. It is shown as dBm and xW when having a test.
User can stop testing by pressing "Stop Test", and the data
displayed is the latest testing result. You can also choose
save current test result, in help of checking afterwards. As
following:
User can modify the file name by themselves.
Click the Insp button can build inspection mission for
line inspection operation, as following:
56
XL-DM317G Multi-service Access
Input the name of the line to separate different lines.
Inspection significance is: test one fiber on different
positions of the optical power value, then draw the power
curve (test curve is similar to the OTDR), you can view any
attenuation values between 2 points.
After establishing inspection mission, click on the
inspection button, current optical power value will be added
to the inspection record end and will be displayed with the
curve graph. The two vertical lines are two movable cursors;
drag the cursor to view the power value and difference of
any two points.
57
XL-DM317G Multi-service Access
Visual Fault Locator (Optional)
Can be used as the visual fault locator; can output the
CW and 2Hz modulation. Click "Red Light", the tester can
used as the visual fault locator. As follows:
58
XL-DM317G Multi-service Access
Click "Open" to turn on the VFL, and click "Close" to
turn off the VFL. CW/2Hz is the switch button of the
continuos and modulated light, the tester can memorize the
VFL mode automatically.
The output power is 1mw/3mw/5mw/10mw
Cable Tracing (Optional)
Tester can do cable tracing and twisted pair and line
distinguish.
Tester can produce special video signal and inject it into
cable, and the video signal will be leaked during the
transmission, and user can receive the signal by receiver,
and do the route test to find different cable.
Click the Tracing icon to enter into the route test
XL-DM317G Multi-service Access
59
interface. As follows:
Cable tracing interface
Click “Open” to start cable tracing, tester start sending
video signal, and then click "Close" to stop the video signal
sending, and user can exit cable tracing by pressing return.
Turn on the receiver, connect the RJ11 test line to the
cable needed to be test, and the click "Open" icon button,
the receiver will start inspection. Keeping the video signal,
and then you can find the route of the wiring.
Network Layer Test
Network layer test which including Ping test, Ifconfig
test, Route test and Traceroute test. Sliding screen can
XL-DM317G Multi-service Access
60
switch test items.
Ping Test
Type IP address or domain name; choose the data
package size and Ping times. At last click "Yes".
XL-DM317G Multi-service Access
61
Ifconfig Test
Click "Yes" to see current network information.
62
XL-DM317G Multi-service Access
Route Test
Click "Yes" to check the current web information.
63
XL-DM317G Multi-service Access
Traceroute Test
Typed the destination address, choose overtime, click "Yes".
E Netcom Test
Click "Search Device" to look for the network
equipment in the local network. The IP, MAC address and
host name of the equipment will display on the interface.
You can also save the current test result to check later.
64
XL-DM317G Multi-service Access
Download Meter
Download speed test can test the web download speed,
reflect the web state directly.
Can browse the download attachment by entering the
website, and user can also download the well-settled
attachment in menu. (the homepage and the address of
attachment download is settled in setting.)
Click "Download", the following interface will be shown:
65
XL-DM317G Multi-service Access
Tester will statistic the max and average download
speed and download progress, the screen will display as
follows after finishing download:
66
XL-DM317G Multi-service Access
FTP Client
FTP Client can log on FTP server, upload and
download programs like the following picture:
Typed FTP server address, user name, password and
port number, and then clicking "Connect" can log on FTP
server. The system will memorize the logged on FTP server
address, user name, password and port number.
Note: the precondition of log on FTP server is the network is
available, either LAN network or WIFI.
2.
SN Code
Tester can connect with Modem through Ethernet, login
the configuration page of WEB, and modify SN code.
67
XL-DM317G Multi-service Access
(Should know IP address, and set up network card IP
address and Modem IP address in same range). This tester
can set up four SN code address, see the following picture:
SN code device address is IP address of SN code
device.
Before login, you should confirm the device and tester
has connected through network line, and then clicks SN
code, it will appear SN code device address window, user
choose and write device address, click "Yes" can login WEB
page. (Usually, it will appear user name and password
before login). Login picture is:
68
XL-DM317G Multi-service Access
Input the user name and password, and login the
configuration page of WEB, double-click the browser to
enlarge the content, slide the screen to view the different
area of the webpage.
3.
Test Setting
Test setting used in device software setting, including
files management and SN code device setting, Modem
power off time setting, like the following picture:
69
XL-DM317G Multi-service Access
Webbrowser Config
Set the homepage address of the testing speed, the
download address of files and whether the speed testing file
need to be stored. As follows:
70
XL-DM317G Multi-service Access
SN code equipment address
This option is setting for SN code default IP address; it
can setup four IP address.
Modem power off time setting
It is used to setup Modem working time; over the setting
time, Modem will shut down. As follows:
71
XL-DM317G Multi-service Access
Settings of shortcut key
Set the corresponding program for F1 and F2, which
can start the setting related program through the two keys,
the setting widow is as follows:
72
XL-DM317G Multi-service Access
Click shortcut key F1 or F2, the program selected
window is as follows:
Select the program need to be started, and then long
73
XL-DM317G Multi-service Access
press F1 or F2 will start the program.
About
Device software version and company contact way:
4.
Records
Browse the test records which have stored. See the picture:
74
XL-DM317G Multi-service Access
Note: when show device name, if the name is too long, it
will intercept appropriate name automatic.
Click corresponding test records can open and check
records.
5.
Read Serial
Barcode scan test interface is shown as below:
75
XL-DM317G Multi-service Access
In the "Read Serial" interface, after pressing "SCAN"
key on the side, it can work. The red light just aim at bar
code, the test result will show on screen. Tester can scan
continuously and show the scan result in table, and record
the scan time. A prompt box about whether store will be pop
up when exit.
6.
Control of the Electric Quality and
Wireless Dial
Control of the electric quality and wireless dial is in
setting, and the tester provides the quick way to control.
Pulling down the prompt column, system will display the
shortcut control icon; click the shortcut icon can open or
close the corresponding option, white is close and blue is
XL-DM317G Multi-service Access
76
open. Please see the following picture:
Description of the control item is as follows:
Settings: shortcut icon of setting open, click it can
open the setting quickly.
Task Manager: Shortcut icon of task manager and click
it can open the task manager quickly.
WLAN icon: the switch for WIFI, if use a router for the
first time, user need to enter into setting, searching WIFI
router at first, and enter the password to connect with the
router. icon will be shown in the prompt bar after
connection.
Bluetooth icon: the switch for Bluetooth, user should
77
XL-DM317G Multi-service Access
search and pair with it when searching other Bluetooth user.
GPS icon: the switch for GPS
Brightness icon: Adjust the brightness of the screen,
click it to adjust the brightness, which includes low, middle,
high, user can adjust the brightness continuously in setting.
Voice icon: adjust the voice mode, which includes
voice mode, silent mode and vibration mode.
Data: switch for 3G wireless. SIM/UIM card is needed,
flow and cost will be generated after clicking, and please
close the link when do not use.
PPPoE icon: switch for PPPoE.
Rotate Icon: open or close the auto Screen revolve
mode.
LAN icon: switch for the LAN network card.
7.
Web
Click web to enter into the browser interface for all
functions, and user can login the common site under the
main menu. As follows:
78
XL-DM317G Multi-service Access
Enter into the website or IP address in the address bar
to login the webpage.
Internet setting menu will pop up when clicking the
menu key which includes refresh, forward, bookmarks, save
to bookmarks, share page, find on page and so on.
Click "Save to bookmark" to store the current page into
the bookmark, and then user can open the webpage quickly.
Click "Settings", the setting interface will pop up which
includes General, Privacy & Security, Accessibility,
Advanced and so on.
User can set the homepage of the browser in "General",
the tester will connect with it automatically when login.
"Settings--Advanced---Save Location" can set the
storage position of the download files, and user can store it
in the inner memorizer or SD card.
79
XL-DM317G Multi-service Access
8.
Dialer
Click dialing key or the number key to enter into the dial
interface. As follows:
Dial interface Call interface
Press call or dial key after input the phone
number to make a phone call; click or key to
hang up the phone. Under phone interface, user can adjust
the volume by pressing the volume key.
Click to show the call records, and click
the corresponding phone icon to dial the number.
Click to display the address, and click the contact
to dial the nu mber.
80
XL-DM317G Multi-service Access
Click to show the stored contacts.
Click to conceal the dialing keyboard.
9.
Contacts
Contacts are the storage information about personal
and business.
Press menu key in "Contacts" interface, can display the
contacts information and Import/Export contacts.
Note: The Import/Export contacts are in the catalogue of TF
card mnt/sdcard.
Find contacts
Input the name of the contact person in the right textbox
81
XL-DM317G Multi-service Access
until you find the person you want.
Create new contact
In Contacts list interface, click "Add" , can add
contact person into device.
Note: More contact persons will affect the system running
speed.
The operation for each contact person
Press the contact person shortly to enter into the
interface with detailed info of the contact person.
Press menu again can edit or delete the contact person
and also can set the corresponding ring. Click the pen icon
below can edit the contact person.
82
XL-DM317G Multi-service Access
10.
Messaging
In main menu interface, click "Messaging" to enter into
message list interface. Press menu key to show setting item,
delete old messages, and click "settings" can set the
content of the message. Clicking "delete " can delete all the
messages.
New message
In messaging interface, click to
enter into the new message interface and it will show as
follows:
XL-DM317G Multi-service Access
83
Click "Receiver" to type into the number of receipts and
then type the content need to be sent in "Type Message".
Clicking number edit box can type number.
Click to add the attachment.
Click to add the attachment.
Click to send message.
11. Clock
Click clock icon, the clock interface will pop up as
follows:
XL-DM317G Multi-service Access
84
Click alarm, and then tester will enter into the alarm add
interface. As follows:
XL-DM317G Multi-service Access
85
Setting: you can turn on/off the alarm, set time, repeat, ring
tone, vibrate and so on.
Open alarm
Click on the top right corner of the alarm interface
and bright display means the function is open.
Note:
In the off state, the system will automatically open and
then start the alarm service.
In order to ensure the alarm effect, please do not set
mute mode.
Please change the battery in 1 minute if needed,
otherwise the alarm, automatic switch, time and date
information may be inaccurate or missing.
12.
Calendar
Click calendar to look up the calendar as follows:
XL-DM317G Multi-service Access
86
13.
Settings
"Settings" includes all the content needed to be set,
detail see the following:
13.1 Wireless & Networks
WLAN
Slide the switch from left to right to open or close WLAN
and click the icon into WLAN setting, as follows:
Tester will search WLAN router automatically after
entering into WLAN setting, and the result will be shown in
list. Click the router can connect with it and some of the
connection needs password. Click “WPS Push Button” or
“Add Network” to search other internet.
XL-DM317G Multi-service Access
87
Bluetooth
Slide switch from left or right to open or close Bluetooth
and click the icon into Bluetooth setting, as follows:
When open Bluetooth, click "device name" can make
the device be found, and detect all the equipments around.
Click "Search for Devices", the device will search and show
Bluetooth list. Press to rename device, set visibility timeout,
show received files.
Data usage
Open or close the date usage function; check the
usage of data.
88
More:
Do the operation of airplane mode, VPN, tethering &
portable hotspot, WLAN direct, WLAN direct setting and
mobile networks.
13.2 Device
Sound
Open or close the silent mode.
Set the volume, ring tone, default notification and so on.
Open or close the vibration and ring, dial pad touch
tones, touch sound, screen lock sound, vibrate on touch and
emergency tone. As follows:
Note: Adjust the volume of the loudspeaker through the up
and down key.
Display
Adjust screen brightness, wallpaper, sleep time and
89
XL-DM317G Multi-service Access
font size. As follows:
Storage
Check TF card space capacity and available system
space as follows:
90
XL-DM317G Multi-service Access
Battery
Check the quantity of the electricity.
91
XL-DM317G Multi-service Access
Application program
You can manage the application program.
Application management: used in managing the
installed applications including display application program
storage, permissions and other information as well as clear
data, clear default settings and forced stop.
Running service: view and control the currently running
services.
Storage: check the storage space of the application
program. As follows:
Preferred install location: it can be used to set the
default installation root of apps
92
XL-DM317G Multi-service Access
13.3 Personal
Includes the settings related to personal:
Location Services:
Click to choose the different location modes such as GPS
satellite.
Security:
● Choose the screen lock mode;
● Owner info;
● Open or close the password visible function;
● Choose the device administrators;
● Set application password and the default password is
1234;
93
XL-DM317G Multi-service Access
● Install the unknown sources with default password 1234
and you can change the password in "Application
Password".
● Choose the trusted evidence.
● Install from the SD card;
● Clear credentials
Language and input
● Select the display language
● Open or close the spelling correction
● Choose different input method
Factory data reset
Factory reset function will clear all the information.
Please copy the important information such as: Contacts
and message etc.
13.4 Accounts
After opening the function, add the account to keep the
synchronization of the equipment and account.
13.5 System
Date and time
● Open or close the automatic date & time which is
provided by network.
● When closed, you need to set the date, time zone and
time.
● Choose the time or date format.
94
XL-DM317G Multi-service Access
Accessibility
● Press power key to end the phone call.
● Choose the touch and hold delay time.
● Choose whether install the network script or not.
Developer Options:
Choose the options for develop person.
Auto power on/off
Set the time of auto power on/off.
About device
View basic device information such as status, legal
information, model number, Android version and so on.
14.
Camera
According to the camera in the device, you can easily
take photographs and make video clips.
Photograph
Enter the camera preview interface through pressing
or , and user can set the parameters by clicking the
icon on the menu as shown in the following picture:
95
XL-DM317G Multi-service Access
Click to enter into the basic setting for the camera,
which includes select storage position, scene mode, picture
size, picture quality and so on.
“Store location” can record the geographical location
information of camera. After opening and GPS location, the
photo will have longitude and latitude information. (You can
see it during browsing photos in Gallery)
Click to enter into white balance
96
XL-DM317G Multi-service Access
Click to enter into flash mode
Click to enter into manual adjustment setting
Click or to take photos
Video
In the camera preview interface, clicking
can be switched to the video. In video mode, the
operation is as following shows:
Click to enter into the basic setting, which includes:
select storage position, video size, video encoder, audio
encoder and so on.
Click to enter into white balance.
Click or to shoot video and pressing again
to stop shoot.
15.
Gallery
View the pictures and videos stored in the SD card, as
shown in the following picture:
Loading...