TF Card
（For TF Card ip camera only）
1. Install TF card
For primary use, firstly please install TF card, one TF card, to keep normal function,
TF card is required with minimum 4G and maximum 32G.
Note:The device will power off automatically when plug or pull out the TF
memory card.
2. TF Card Info： --- ---
Display the hard disk state: type, overall capability, residual capability, the
recording time and so on.
Tips：○ means that the hard disk is normal. X means that the hard disk is
broken-down.- means that there is no hard disk. If the user need to change the
damaged hard disk, you must shut down the Camera and take up all the damaged
hard disks,then install a new one.
3. TF Card record Setting： --- ---
Record setting
Device should install TF card to realize this function.
【Length】to set the length of each recording file between 1-120min, default is 60min；
【PreRecord】to record 1-30s before motion happens (time length may slight different due
to bit rate)
【Record control】set recode type: timing, manual & stop
Timing: Record according to the set video type (regular, detect and
alarm)and time period.
Manual：Click the button and the according channel is recording no matter
the channel in any state；
Stop：Click the stop button and the according channel stops recording no
matter the channel in any state.
4. Playback：
To play the video file in TF card, can click at upper left side on monitor
page, to enter video playback page.
Remark: Device normal playback, the TF card that used for video storage
should be set as read/write or read only (please refer to HDD manage).
Playback：Remote
1. Play
【Playback control button】see detail in below chart；
Button Function Button Function
Remark：Playback by frame should under the status of playback pause.
【Operate tips】to show the button function when cursor point it
Special feature：
Partial enlargement：when single view full screen playback, can use right button to
choose any size of area from the image, click left button in the chosen area, can
enlarge this area to playback, double click left button will exit.
2. Download：
Play
Slow-play
Previous frame
Stop
Pause
Fast-play
Next frame
H264 or AVI :
“H.264 PLAYER”and“Video Conver”in CD.
“H.264 PLAYER”:
“Video Conver”: Video conver from h264 to avi
5. TF Card full： ---- ----
choose Stop record：means when the TF card is full, stop recording.
Choose Over write：means when the TF card is full, keep on recording, but the most
previous file will be replaced.
Loading...