PTDX5311
PTDX9211
User’s Manual
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc.
Safety Information
♦
Read these Safety instructions carefully.
♦
Make sure the voltage of the power source is correct before connecting the equipment to
the power outlet.
♦
Do not expose your Panel PC to rain or moisture, in order to prevent shock and fire
hazard.
♦
Keep PTDX5311/9211 away from humidity.
♦
Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for
qualified personnel servicing.
♦
Never touch un-insulated terminals or wire unless your power adaptor is disconnected.
♦
Locate your Panel PC as close as possible to the socket outline for easy access and to
avoid force caused by entangling of your arms with surrounding cables from the Panel
PC.
♦
USB connectors are not supplied with Limited Power Sources.
♦
If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE
CHASSIS
(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR DEALER
FOR
SERVICING FROM QUALIFIED
TECHNICIAN
.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s .............................................................iv
C h a p t e r 1 General Information..…………………………………1
1.1 Product
Description ................................................
1
1.2 Product
Specifications ............................................
2
1.3 Product Dimension..........................................4
1.4 Ordering Information
..............................................
5
1.5 Packing
List ............................................................
5
C h a p t e r 2 System
Installation.................................................
6
2.1 CPU Board
Outline .................................................
6
2.2 Connector Summary
..............................................
8
2.3 Connector Pin Assignments
...................................
9
2.4 External I/O Overview
..........................................
12
2.5 External I/O Pin
Assignment.................................
13
2.6 System
Mapping...................................................
15
2.7 Watchdog Timver
.................................................
18
C h a p t e r 3 Driver Installation…..………………………………..19
3.1 PTDX5311/9211 Development
Note....................
20
3.2 BIOS Defaul
Setting .............................................
21
Warranty............................................................................................
22
This page is
blank
v
C h a p t e r 1
General Information
1.1 Product Description
PTDX5311/9211 is an ultra compact platform for the present demanding embedded and
productive applications. It has new Vortex86DX SoC CPU which consumes only
minimum power requirement when running at 1GHz, and DDR2 memory provides faster data
transfer rate. By using 5.7/8.9” TFT LCD, PTDX5311/9211 becomes the perfect choice for a
limited budget. In additional, the integrated 10/100M Ethernet port supplies the
communication capability which makes PTDX5311/9211 can be more widely used when
running with Linux, Windows CE, and Windows XP
environment to become the perfect solution for system integration.
„
5.7/8.9” WSVGA TFT LCD
„
4-Wire Resistive Touch Panel
„
Vortex86DX SoC 1GHz
„
256/512MB DDR2 system memory
„
AMI BIOS
„
2 watchdog timer
„
Compact Flash Type I/II / Micro SD
„
10/100Mbps Ethernet
„
2 USB 2.0 (host)
„
1 RS-232/485/422 ports
„
Mini-PCI Socket (Wi-Fi Optional)
„
Audio Out
„
Single voltage +5V DC(5A Version)
„
Multi voltage +8~+35V DC(8A Version)
„
Fanless Design
„
Operating temperature range of 0°C to
+60°
1.2 Product
CPU Board Specifications
CPU
Vortex86DX 1GHz
Cache
L1:16KB I-Cache, 16KB D-Cache
L2: 128KB Cache
BIOS
AMI BIOS
Memory
256/512MB DDR2 onboard
Watchdog Timer
Software programmable from 30.5u to 512 seconds x 2 sets
LAN
Integrated 10/100M Ethernet
Audio
CM119 Line-Out
Internal Drives
Compact Flash Type I/II slot
Micro SD slot
I/O
RS-232/422/485 x 1
USB ports (Ver2.0) x 2
RJ-45 Port x 1
Expansion Slot
Mini-PCI socket x 1 (Internal)
Mechanical & Environment
Power Requirement
Single Voltage +5VDC ( 5A )
Multi Voltage +8~+35VDC ( 8A )
Power Consumption
1.3A
Operating Temperature
0 ~ +60 ℃ (+32 ~ +140 ℉)
Storage Temperature
-20 ~ +70 ℃ (-4 ~ +158 ℉)
Dimensions
236.6 x 146 x 35mm (9.31 x 5.75 x 1.38 inches)
Weight
468g
Certification
CE, FCC, VCCI
LCD Specifications
Display Type
5.7/8.9” TFT LCD
Backlight Unit
LED
Display Resolution
640(W) x 480(H) / 1024(W) x 600(H)
Brightness (cd/m2)
220 nits
Contrast Ratio
500:1
Display Color
262,144
Pixel Pitch (mm)
190.5 (H) x 189 (V) (PTDX9211)
Viewing Angle
Vertical 110o,
Horizontal 140
o
Backlight Lifetime
25,000 hrs
Touchscreen
Type
Analog Resistive
Resolution
Continuous
Transmittance
80%
Controller
USB interface (RS-232 interface)
Software Driver
Linux/WinCE/WinXP
DOS(RS-232 interface only)
Durability
1 million
1.3 Product
C h a p t e r 2
System Installation
2.1 CPU Board Outline
Bottom
View
2.2 Connector Summary
Summary
Table
Nbr
Description
Type of Connections
Pin nbrs.
J1
CF Master/Slave Switch
Slide Switch
On/OFF
J3
USB
External USB Connector
6-pin
J4
USB
External USB Connector
6-pin
J5
USB (Touchscreen)
2.0mm 5-pin wafer
5-pin
J6
J-TAG
1.25mm 6-pin wafer
6-pin
J8
PS/2 Keyboard
2.54mm 5-pin box header
5-pin
J9
PS/2 Keyboard/Mouse
External Mini DIN Socket
6-pin
J10
COM1(RS232/422/485)
External D-Sub Male Connector
9-pin
J14
VGA
2.0mm 10-pin box header
10-pin
J27
LVDS connector
1.25mm WAFER20P
20-pin
J18
Micro SD Card Socket
Micro SD socket
9-pin
J24
Audio Mic-In
2.0mm 4-pin wafer
4-pin
J29
Power/IDE LED
2.0mm 4-pin wafer
4-pin
RJ45
Ethernet
External RJ45 Connector
8-pin
PWR
Power Connector (5A)
External Mini DIN Socket
3-pin
PWR
Power Connector (8A)
External Power Plug
2-pin
J23
Audio Line-Out
1.25mm Phone Jack
CF1
CF Card Socket
CF Type I/II Socket
J13
Mini-PCI Socket
Expansion Mini-PCI Socket
J18
Micro SD Card Socket
Micro SD socket
2.3 Connector Pin Assignments
J1: CF Master/Slave Switch
Pin #
Signal Name
On
Master
OFF
Slave
J3: USB
Pin #
Signal Name
Pin #
Signal Name
1
VCC
2
USBD2-
3
USBD2+
4
GND
5
GND
6
GND
J4: USB
Pin #
Signal Name
Pin #
Signal Name
1
VCC
2
USBD3-
3
USBD3+
4
GND
5
GND
6
GND
J5: USB (Touchscreen)
Pin #
Signal Name
1
VCC
2
USBD1-
3
USBD1+
4
GND
5
GND
J6: J-TAG
Pin #
Signal Name
1
VCC
2
GND
3
TCK
4
TDO
5
TDI
6
TMS
J8: PS/2 Keyboard
Pin #
Signal Name
Pin #
Signal Name
1
KBCLK
2
KBDAT
3
NC
4
GND
5
VCC
J9: PS/2 Keyboard/Mouse
Pin #
Signal Name
Pin #
Signal Name
1
KBCLK
2
MSCLK
3
GND
4
KBDATA
5
MSDATA
6
VCC
7
GND
8
GND
9
GND
J10: COM1 RS232/422/485 (Change setting by BIOS)
Pin #
Signal Name
Pin #
Signal Name
1
DCD1/ 422TX- / RS485-
2
RXD1 / 422TX+ / RS485+
3
TXD1 / 422RX+
4
DTR1 / 422RX-
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
J14: VGA
Pin #
Signal
Name
Pin #
Signal
Name
1
R OUT
2
GND
3
G OUT
4
GND
5
B OUT
6
GND
7
HSYNC
8
GND
9
VSYNCD
10
GND
J27: LVDS Connector
Pin #
Signal Name
1
GND
2
3.3V
3
3.3V
4
BRIGHTNESS
5
TXOUT0-
6
TXOUT0+
7
TXOUT1-
8
TXOUT1+
9
GND
10
GND
11
TXOUT2-
12
TXOUT2+
13
TXCLKOUT-
14
TXCLKOUT+
15
GND
16
GND
17
5V
18
5V
19
NC
20
NC
J24: MIC-IN
Pin #
Signal Name
1
MICVREF
2
GND
3
GND
4
MIC-IN
PWR: Power Connector (5A)
Pin #
Signal Name
1
+5V
2
GND
3
NC
4
GND
PWR: Power Connector (8A)
Pin #
Signal Name
1
+ 8 ~ 35V
2
GND
J29: Power/IDE LED
Pin #
Signal Name
1
PWRLEDP
2
PWRLEDN
3
IDELEDP
4
IDELEDN
2.4 External I/O Overview
PTDX5311/9211WA
PTDX5311/9211A
(Note1: Wireless is optional)
(Note2: COM1 RS232/422/485 is selected by BIOS setting)
2.5 External I/O Pin Assignment
Power Switch
Pin #
Status
|
ON
O
OFF
Power Connector (5A)
Pin #
Signal Name
1
+5V
2
GND
3
NC
Power Connector (8A)
Pin #
Signal Name
1
+8 ~ 35V
2
GND
J10: COM1 RS232/422/485 (Change setting by BIOS)
Pin # Signal Name
Pin # Signal Name
1
DCD1/422TX-/RS485-
2
RXD1/422TX+/RS485+
3
TXD1 / 422RX+
4
DTR1 / 422RX-
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
Audio Line-Out
Pin #
Signal
Name
1
GND
2
LOUTL
3
Open Touch
4
Open Touch
5
VREFOUT
USB
Pin #
Signal Name
1
VCC
2
USB0-
3
USB0+
4
GND
5
GGND
6
GGND
RJ45
Pin #
Signal Name
Pin #
Signal Name
1
FTXD+
2
FTXD-
3
FRXIN+
4
NC
5
NC
6
FRXIN-
7
NC
8
NC
PS/2 Keyboard/Mouse
Pin #
Signal Name
1
KBCLK
2
PMCLK
3
GND
4
KBDAT
5
PMDAT
6
SB5V
2.6 System Mapping
2.7 Watchdog Timer
There are two watchdog timers in PTDX5311/9211, we also provide DOS, Linux and WinCE
example for your reference.
C h a p t e r 3
VGA
Driver Installation
The Vortex86DX processor also use external Display chip ““Volari™ Z9s” which is an ultra low
powered graphics chipset with total power consumption at around 1-1.5 W.
LAN
The Vortex86DX processor also integrated 10/100Mbps Ethernet controller that supports both
10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area
Network for full interaction with local servers, wide area networks such as the Internet.
I/O and IRQ settings can be done by software with the supplied utility software, or it can be set
for Plug and Play compatibility. The controller supports: Half / Full-Duplex Ethernet function to
double channel bandwidth, auto media detection.
AUDIO
CM119 is a highly integrated single chip USB audio controller specifically for VoIP (Voice over
internet protocol) application. All essential analog modules are embedded in CM119, including
dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver.
8 GPIO pins can constitute a 24 key matrix directly support keypad control function without MCU.
Many features are programmable with jumper pins or external EEPROM. Vender can customize
unique USB VID/PID to EEPROM for VoIP software authentication. Moreover, individual unique
phone number for each device is possible via serial number stored in external EEPROM.
Operating system support
The PTDX5311/9211 provides the VGA and LAN drivers for DOS 6.22, Windows CE 5.0,
CE 6.0, Windows XP Professional, and Windows Embedded standard (XPE).
Please get the drivers from: ftp://ftp.asm.cz/XtendLan/PTDX53xx,PTDX8xx
3.1. PTDX5311/9211 Development Note
<Primary /Secondary IDE: Master or Slave>
Micro SD: Primary Master
CF Slot: Secondary IDE: Master or Slave (User can use slide switch (in side of CF
slot) to adjust Master or Slave
<Linux installation note>
Please forced the IDE settin g in BIOS to PIO mode before install Linux
on PTDX5311/9211 as follows:
1-Go to the advanced BIOS setting and make the “Onboard IDE Operate Mode” is
“Legacy Mode”
2-Go to the PCI/PnP and make the “ PCI IDE BusMaster” is “Disable"
< XP professional /Home /Embedded and Windows 2000 installation note >
1-Please visit Vortex86DX CPU website to get more information:
ftp://ftp.asm.cz/ Xt en dLan/RB _T C-261 DX_261HDX _2 61 LDX_262 DX _DXM/Ma nu al /RB_TC_ 26 xDX_MX_ De bi an_5.pdf
2-Go to the Advanced and make "Onboard IDE operate Mode" "Native mode"
3-If your CF Card support UDMA2/4, pleas e Go to the PCI PnP and make the “ PCI
IDE BusMaster” is “Enable”
<Enhance CF to run the UDMA2/4>
1-Make sure the CF Card is supporting UDMA 2/4 Mode or not.
2-Go to the PCI/PnP and make the “ PCI IDE BusMaster” is “ Enable”
<How to boot up from the Micro SD card>
1-Get into the BIOS setup Utility
2-Go to the Advanced
3-Choose Primary IDE Pin Select: SD card
4-Press “ F10” to save configur ation changes and exit setup
Note:
1-Wi-Fi module is optional
2 -PTDX5311/9211 COM1: support RS232/422/485 and select by BIOS SETUP.
3 -PTDX5311/9211 series (CPU Speed: 1GHZ): Support Free DOS,DOS
6.22,DR-DOS,x-DOS,Xlinux,Embedded Linux, Windows CE 5.0, CE 6.0, Windows XP
Professional, and Windows Embedded standard(XPE).
3.2. BIOS Default setting
If the system cannot be booted after BIOS changes are made, Please follow below procedures in
order to restore the CMOS as default setting.
„
Press “End” Key, when the power on
„
Press <Del> to enter the AMI BIOS setup
„
Press “F9” to Load Optimized Defaults
„
Press “F10” to Save configuration changes and exit setup
Warranty
This product is warranted to be in good working order for a period of one year from the date of purchase.
Should this product fail to be in good working order at any time during this period, we will, at our option,
replace or repair it at no additional charge except as set forth in the following terms. This warranty does not
apply to products damaged by misuse, modifications, accident or disaster. Vendor assumes no liability for
any damages, lost profits, lost savings or any other incidental or consequential damage resulting from the
use, misuse of, originality to use this product. Vendor will not be liable for any claim made by any other
related party. Return authorization must be obtained from the vendor before returned merchandise will be
accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return
Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear
problem description.
Loading...