CAMERA + PIR DETECTOR
ITEM NO.:
PIR SENSOR
PIRCAM480L20-P7110
CN1
CN2
LED
RELAY
LU-12
DELAY
PIR
Continue
JN
JP1: PULSE ALARM COUNTER
N (Side Trigger OUTPUT for SINGLE pulse Alarm)
Y (Opposite Trigger OUTPUT for 2 OR MORE pulses Alarm in 5 sec.)
JP2: TIMING ALARM (RELAY OUTPUT)
N (Side 10 sec. after the LAST pulse Alarm)
Y (Opposite 10 sec. after the FIRST pulse Alarm, if 2 or more pulse Alarm in these 10
sec.)
Caution for Installation
1. Avoid places where there is direct sunlight.
2. Do not directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe
off the dust.
3. Avoid places where temperatures exceed 50 o C or more.
4. Avoid places where there is frequent vibrations or shocks.
5. Please input power regulator DC 12V.
6. When any abnormalities occur, make sure to unplug the unit and contact your local dealer
n SPECIFICATIONS
ITEMS
TYPE COLOR
PICK UP DEVICE 1/4” CCD IMAGE SENSOR
PICTURE ELEMENTS NTSC: 752 Hx582V PAL: 500 Hx582V
HORIZONTAL RESOLUTION 480 Lines
MINI ILLUMINATION 0.2Lux/F2.0
HORIZ. SYNC.FREQUENCY EIA/ NTSC: 15.734 KHz - CCIR/ PAL: 15.625 KHz
VERTICAL FREQUENCY EIA/ NTSC: 60 Hz – CCIR/ PAL: 50 Hz
CLOCK FREQUENCY EIA/ NTSC: 19.0699 MHz - CCIR/ PAL: 18.9375 MHz
SCANNING SYSTEM 2:1 INTERLACE
S/N RATIO 50 dB
ELECTRONIC SHUTTER NTSC:1/60~1/120,000 sec PAL:1/50~1/120,000 sec.
LENS
VIDEO OUTPUT 1 Vp-p, 75 Ohms
AUDIO OUTPUT NO
GAMMA. 0.45
PIR SENSOR 7M / 110 Degrees, ANTI-RFI
PULES COUNTER YES with Automatic Reset
CONTACT ALARM Contact NO / NC with Common Point
DIMENSIONS W×H×D mm 60× 115× 30.8 (100 with bracket)
WEIGHT g. 100
POWER SUPPLY
POWER CONSUMPTION 110mA
STORAGE TEMPERATURE
OPERATING TEMPERATURE
# The camera begin to operate only when PIR was triggered.
Remark:
The camera are only operated with regulative adaptor DC 12V,
AC non-regulative adaptor may cause camera damaged.
PIRCAM480L20-P7110
Pin Hole3.8mm/F:2.0
12 VDC ( + /–0.5V )
–30 to + 60℃
–10 to + 45℃
17X 2009/0706
Loading...