How it Works
XtendLan
Loading...
NVR-800F-E
User Manual
43 pgs1.66 Mb0

XtendLan NVR-800F-E User Manual

Download
NVR-800F-E User’s manual
Version
Version
Version
Version3.0
3.0
3.0
3.0
Contents
1.1 Local Operation Guide ........................................................................................................... 3
2.1 Main menu-Start (Power off, Reboot, Login, Logout, Device Time, Volume) ............... 4
4.1 Search IPC .............................................................................................................................. 6
4.2 Add IPC automatically ........................................................................................................... 7
4.3 Add IPC manually ................................................................................................................... 7
4.4 Channel parameters modification ........................................................................................ 8
5.1 Device parameters setting .................................................................................................. 10
5.2 Channel parameters setting ............................................................................................... 10
5.2.1 Display Setting .......................................................................................................... 10
5.2.2 Video Parameters ..................................................................................................... 11
5.2.3 Schedule Record ...................................................................................................... 12
5.2.4 Motion Detection ....................................................................................................... 14
5.2.5 Video lost ................................................................................................................... 16
5.2.6 Tampering Alarm ...................................................................................................... 17
5.2.7 Video Mask Setting ................................................................................................... 18
5.3 Network parameters setting ............................................................................................... 19
5.3.1 Network Setting ......................................................................................................... 20
5.3.2 DNNS Setting ............................................................................................................ 24
5.3.3 NTP Setting ............................................................................................................... 25
5.3.4 Email Setting ............................................................................................................. 26
5.4 Alarm&Exception .................................................................................................................. 26
5.4.1 Alarm Input ................................................................................................................. 27
5.4.2 Exception ................................................................................................................... 28
5.5 Account Setting .................................................................................................................... 29
5.5.1 User information Setting .......................................................................................... 29
1
5.5.2 User Online Checking .............................................................................................. 30
5.6 System administration ......................................................................................................... 31
5.6.1 Device Log ................................................................................................................. 31
5.6.2 Stream Info. ............................................................................................................... 32
5.6.3 HDD Setting ............................................................................................................... 33
5.6.4 System Update .......................................................................................................... 34
5.6.5 Auto Reboot ............................................................................................................... 34
5.6.6 Recovery Configuration ........................................................................................... 34
6. PTZ control ...................................................................................................................................... 34
7. Manual record ................................................................................................................................. 35
8. Manual snapshot ............................................................................................................................ 36
9. Video Playback ............................................................................................................................... 36
10. Screen Display Setting ................................................................................................................ 37
11.Video Backup Setting ................................................................................................................... 38
12. Alarm setting ................................................................................................................................. 39
13. File Manage .................................................................................................................................. 40
14. Image Setting ................................................................................................................................ 41
15.Screen Aspect Ratio/Segmentation ........................................................................................... 41
2
1.
Menu
1.
Menu
1.
1. Menu
Menu operation
operation
operation
operation
1.1 Local Operation Guide
As picture ：
2.
Start/
2.
Start/
2.
2. Start/
Start/ Shutdown
Shutdown
Shutdown
Shutdown System
System
System
System
2.1 Main menu-Start (Power off, Reboot, Login, Logout , Device
Time, Volume )
1
User Guide
）
2 ） Power off ： Click "Power off" , the device will shutdown
3
Reboot：Click "Reboot" ,the device will reboot automatically
）
4 ） Logout ： Click "Logout" , the device will logout
Do Language,Display,Network setting
：
3
5
Device Time
）
6
Volume
）
3.
Preview
3.
Preview
3.
3. Preview
Preview
Start up the devices, after successfully login the following interface will appear ：
：
Click "Device Time" , will hide or display the device time
：
Click "Volume" , will off or on the device volume
4
.
IP
4
4
4 .
the below picture ：
Channel
.
IP
Channel
. IP
IP Channel
Channel setting
Click the IP Channel setting , and do basic parameters modify , as shown in
setting
setting
setting
4
4.1
Search
4.1
Search
4.1
4.1 Search
Search IPC
At the page of "IP Channel Setting" , click "Search", the local area network IPC
IPC
IPC
IPC
will appear, and do basic parameters modify,as shown in the below picture
：
4.2
Add
4.2
Add
4.2
4.2 Add
Add IPC
IPC
IPC
IPC automatically
Mark the needed IPC in the "Search menu", the configuration of IP camera
automatically
automatically
automatically
5
will add to the left channel automatically, then click"save", as shown in the below picture ：
4.3
Add
4.3
Add
4.3
4.3 Add
Add IPC
（ Note ： Click "ALL" will add the search menu camera to the right channel in turn ）
IPC
IPC
IPC manually
manually
manually
manually
6
■ Select the relevant channel, c lick " √ " in front of "Enable" at the channel item
■ Select relevant protocol
■ Input the IP address
■ Input the port number
■ Select Stream Type
■ Select Network type
■ Select Play Mode
■ Input the user name
■ Input the IPC password, and click "Save" finally
4.4
Channel
4.4
Channel
4.4
4.4 Channel
Channel parameters
Double-click the channel parameters which needed to modify on the left
parameters
parameters
parameters modification
modification
modification
modification
"Channel menu", then input relevant parameters, click"Save", as shown in the below picture ：
7
1
Protocol：ONVIF Standard protocol/ I8 Private protocol/ I9 Private protocol/
）
RTSP Standard protocol for selection
3 ） IP ： Edit and modify the IP address manually
4
Device Name
）
5 ） Port ： Edit and set the relevant port number
6 ） Stream Type ： Select "Main Stream" or "Sub Stream"
7
Network type
）
8 ） Play Mode ： Select “ Smooth ” or “ Real time ”
7
User Name
）
8
Password
4.
5
4.
5
4.
4. 5
5 Delete
）
Delete
Delete
Delete IPC
：
IPC
IPC
IPC
Display present Device Name
：
Select “ TCP ” or “ UDP ”
：
Input the user name
：
Fill the password in the password field
Mark the IPC parameters which needed to delete, then click" ", as shown
in the below picture :
5
.
System
5
.
System
5
5 .
. System
System configuration
Click the setting , and do basic parameters modify , as shown in the below picture ：
configuration
configuration
configuration setting
setting
setting
setting
8
5.1
Device
5.1
Device
5.1
5.1 Device
Device parameters
Click "Device parameters" on the "Device Info." interface, then view and modify
parameters
parameters
parameters setting
setting
setting
setting
the relevant basic information, as shown in the below picture
：
9
1
Device Info.：Check and modify the basic information
）
2
System Version
）
3 ） PTZ Setting ： Modify the access dome cameras parameters
4 ） DST Setting ： Enable and set DST parameters
5.2
Channel
5.2
Channel
5.2
5.2 Channel
Channel parameters
parameters
parameters
parameters setting
Show the system Master and Hardware version
：
setting
setting
setting
5.2.1 Display Setting
Select the relevant channel and modify the parameters on the "Display Setting"
interface, as shown in the below picture :
1 ） Channel ： Modify the specified channel name
2
Local camera name
）
channel
3 ） C amera n ame ： Modify the input devices channel name for specified channel
4 ） Time format ： Select time display mode for the access devices
5
Date format：Select date display mode for the access devices
）
6 ） OSD Position ： Set different display position for the access devices name and
Modify the input devices channel name for specified
：
10
display-time
7
Image Setting
）
8 ） Sensor ： Set the sensor parameters of the IPC input
Adjust the access devices brightness and contrast
：
Note
（
5.2.2
5.2.2
5.2.2
5.2.2 Video
Modify the relevant channel video parameters on the "Video Parameters"
interface,as shown in the below picture :
Except 1 , other options only efficient for privacy protocol equipments)
：
Video
Video
Video Parameters
Parameters
Parameters
Parameters
1 ） Channel ： Select the channel number
2
Encoding Type
）
3 ） Stream type ： Video&Audio/Video optional
4
Resolution
）
5 ） Bit rate Type ： CBR/VBR optional
6
Bit rate
）
7 ） Frame Rate ： Select different frame rate from the drop-down list, "FULL"default.
8
Video quality
）
9 ） I Frame Interval ： Set I Frame Interval rate
：
Select relevant bit rate which needed
：
Mani stream/Sub stream/Main stream(Event) for selection
：
Several kinds of resolution which IPC supported
Different level video quality optional, "Highest" default.
：
11
Note
（
" Video setting" will be directly modify the IP cameras parameters, and only
：
valid for private protocol linkage channel
5.2.3
5.2.3
5.2.3
5.2.3 Schedule
shown in the below picture :
Schedule
Schedule
Schedule Record
Modify each video channel parameters on the "Schedule Record" interface,as
Record
Record
Record
）
5.2.3.1 Video precise backup
Double-click the time bar to set precise video backup, there will be a small check appear, and then double-click the small check, the following interface will pop-up(The check box in front of "All Day Recording" can not mark ) ：
12
5.2.3.2 Record time
Click "Setting" to do period time recording on the "Schedule " interface, as shown in the below picture ：
（ Note ： It can set 8 periods video recording mode during one day ）
5.2.3.3 Advanced Record
Set relevant advanced recording parameters for each channel on the "
Advance" interface, as shown in the below picture :
13
5.2.4
5.2.4
5.2.4
5.2.4 Motion
（ Note ： Fore-end IP Camera must support motion detection)
below picture ：
Motion
Motion
Motion Detection
Modify each video channel parameters on the "Motion" interface,as shown in the
Detection
Detection
Detection
1 ） Click " √ " in front of "Enable Motion Detection" 2 ） Set motion areas, as shown in the below picture ：
14
3
Adjust sensitivity volume
）
4
Set arm schedule
）
5 ） Select trigger mode, as shown in the below picture ：
5.2.5
5.2.5
5.2.5
5.2.5 Video
Video
Video
Video lost
Modify each video channel parameters on the "Video lost" interface,as shown
in the below picture :
lost
lost
lost
15
1
Click " √ " in front of "Enable Video Lost"
）
2
Set arm schedule
）
3 ） Select trigger mode, as shown in the below picture ：
5.2.6
5.2.6
5.2.6
5.2.6 Tampering
（ Note ： Fore-end IP Camera must support tampering alarm)
shown in the below picture :
Tampering
Tampering
Tampering Alarm
Modify each video channel parameters on the "Tampering Alarm" interface,as
Alarm
Alarm
Alarm
16
1
Click " √ " in front of "Enable Video Tampering"
）
2
Area setting, as shown in the below picture
）
3 ） Set arm schedule
：
4 ） Select trigger mode, as shown in the below picture ：
17
5.2.7
5.2.7
5.2.7
5.2.7 Video
the below picture :
Video
Video
Video Mask
Modify each video channel parameters on the "Video Mask" interface,as shown in
Mask
Mask
Mask Setting
Setting
Setting
Setting
1
Click " √ " in front of "Enable Video Mask"
）
2 ） Set mask areas, as shown in the below picture ：
18
5.3
Network
5.3
Network
5.3
5.3Network
Networkparameters
Settherelevantparametersaccordingtotheneedonthe"Network"interface,as
showninthebelowpicture.
parameters
parameters
parameterssetting
setting
setting
setting
5.3.1
5.3.1
5.3.1
5.3.1Network
inthebelowpicture：
Network
Network
NetworkSetting
Modifythebasicnetworkparametersonthe"Networksetting"interface,asshown
Setting
Setting
Setting
19
1
）
2
）
NICType
IP
InputtherelevantIPaddressnumber(IP
：
Selectdiversenetworkcardaccordingtotheneed
：
192.168.1.189default
：
）
3）SubnetMask：InputrelevantIPsubnetmasknumber
4
DefaultGateway
）
Inputrelevantdefaultgateway
：
5）FirstDNS：InputrelevantIPFirstDNSnumber
6）SecondDNS：InputrelevantIPSecondDNSnumber
7
Mac
）
DisplaypresentMACaddress
：
8）Defaultroute：ThedefaultrouteisNIC1
9
RemotePort：Inputrelevantremoteportnumber
）
10）HTTPPort：Inputrelevantportnumber（80default）
11
）
Multicast
Editrelevantmulticastaddress
：
12）WIFI：Click"√"infrontof"EnableWi-Fi"afterlinkWi-Fiexternalattachment
andthenclick"Refresh",thedevicewillsearchwirelessautomatically,inputthe relevantparameters,click"OK"tosaveit,asshowninthebelowpicture:
20
13）3G：Click"√"infrontof"Enable3G"afterlink3Gexternalattachment,relate
devicetype,editrelevantphonenumber,andselectworkstate,click"OK"after setting,asshowninthebellowpicture：
5.3.1.1Advancedsetting
Setadvancedconfigurationparametersonthe"Advance"interface,asshownin
thebelowpicture：
21
1)AdministermainmachinetorealizeDVRregistertotheserversautomatically
2)EnablePPPOEfunctiontoachieveNVRdialing
3)Click"√"infrontof"EnableUPnP"
andsetupHTTPportandTCPportitcan
，
matchsuccessfully,noticetheportnumbercannotconflictwithotherdevices.
22
5.3.2
5.3.2
5.3.2
5.3.2D
internet,andrunthisDDNSserveronit.
D
D
NS
D
D
DD
DNS
ThroughtheDDNSserver,thereshouldbeaPCwithfixedIPaddressonthe
Setting
NS
Setting
NSSetting
Setting
1)SelectDDNSservertype
selection）
2)Inputtheservername“Forexample：member.3322.org”
3)Inputtheport
4)Inputtheusername
5)Inputthepassword
6)Confirmthepassword
7)Inputthestandbydomainname
ThereareDynDns、PeanutHull、NO-IPand3322for
（
23
5.3.3
5.3.3
5.3.3
5.3.3NTP
NTP
NTP
NTPSetting
Setting
Setting
Setting
1）ServerAddress:InputtheIPoftheNTPserver
2
NTPPort:ThisNTPonlysupportsTCPtransmission,itisdefaultto123
）
3）UpdateFrequency：Inputthetimeintervalneededtobeadjusted
4
SelectTimeZone
）
5）GMT:Dofineadjustmentoftime
Selectthetimezoneofdifferentplaces
：
24
5.3.4
5.3.4
5.3.4
5.3.4Email
Email
Email
EmailSetting
SetupalarmlinkageE-mailonthe"EmailSetting"interface,asshowninthebelow
Setting
Setting
Setting
picture
：
5.
3
.
5
5.
5.
5.3
picture：
Management
3
.
5
Management
3.
.5
5Management
ManagementPlatform
Settherelevantparametersonthe"Protocol"interface,asshowninthebelow
Platform
Platform
Platform
25
5.4
Alarm
5.4
Alarm
5.4
5.4Alarm
Alarm&Exception
Settherelevantparametersaccordingtotheneedonthe"Alarm"interface,as
showninthebelowpicture：
&Exception
&Exception
&Exception
26
5.4.1
5.4.1
5.4.1
5.4.1Alarm
Alarm
Alarm
AlarmInput
Setalarminputparametersonthe"AlarmInput"interface,asshowninthebelow
Input
Input
Input
picture
：
1
Enablealarmprocessing
）
2）Setarmschedule 3）Selecttriggermode,asshowninthebelowpicture：
5.4.
2
5.4.
5.4.
5.4.2
Exception
2
Exception
2Exception
Exception
Setabnormalityonthe"Exception"interface,asshowninthebelowpicture
27
：
5.5
Account
5.5
Account
5.5
5.5Account
AccountSetting
Settherelevantparametersaccordingtothe"Account"interface,asshowninthe
Setting
Setting
Setting
belowpicture
：
28
5.5.1
5.5.1
5.5.1
5.5.1User
Modify/Add/Deletetheuserordistributeuserpermissiononthe"AccountSetting"
User
User
Userinformation
information
information
informationSetting
Setting
Setting
Setting
interface,asshowninthebelowpicture
：
29
5.5.2
5.5.2
5.5.2
5.5.2User
User
User
UserOnline
Checkthecurrentuserconnectionstatusonthe"UserOnline"interface,asshown
Online
Online
OnlineChecking
Checking
Checking
Checking
onthebelowpicture
：
5.6
System
5.6
System
5.6
5.6System
Systemadministration
Settherelevantparametersaccordingtothe"System"interface,asshowninthe
belowpicture.
administration
administration
administration
30
5.6.1
5.6.1
5.6.1
5.6.1Device
Device
Device
DeviceLog
Click"DeviceLog"onthe"System"interface,checkdevicelogaccordingtothe
Log
Log
Log
videotypeanddatetime,asshowninthebelowpicture
：
1）MainTypeofLog：AllType/Alarm/Exception/Operationforselection
2
SubType:Accordingtothedifferentmaintypes,havecorrespondingsubtype
）
forselection
3
From
）
4）
To
5）Export：Exportanddisplayallqueryresults
Selectastarttimeforlogquery
：
：Selectaendtimeforlogquery
31
5.
6
.2
5.
5.
5.6
Stream
6
.2
Stream
6.2
.2Stream
StreamInfo.
Viewthestreaminformationofeachcurrentchannelonthe"StreamInfo."
Info.
Info.
Info.
interface,asshowninthebelowpicture
：
5.6.3
5.6.3
5.6.3
5.6.3HDD
HDD
HDD
HDDSetting
Click“HDDSetting”,checkHDDcapacity/freespace,anddoformatbyclick“√”
infrontofHDDNo.,asshowninthebelowpicture:
Setting
Setting
Setting
5.
6
.4
5.
5.
5.6
System
6
.4
System
6.4
.4System
SystemUpdate
Browsingtheupgradefileonthe“Update”,click“Upgrade”todosoftwareupdate.
Update
Update
Update
32
5.
6
.5
5.
5.
5.6
willrestartaccordingtothemaintenancemode.
5.
5.
5.
5.6
correspondingoperation.
6.
6.
6.
6.PTZ
Auto
6
.5
Auto
6.5
.5Auto
AutoReboot
ThereareDisable/EveryDay/Everyweek/Onceoptionsforselection,thedevice
6
.6
Recovery
6
.6
Recovery
6.6
.6Recovery
RecoveryConfiguration
Click“ExportConfiguration”/“ImportConfiguration”/“Default”tomakedevicedo
PTZ
PTZ
PTZcontrol
Reboot
Reboot
Reboot
control
control
control
Configuration
Configuration
Configuration
1
"Preset”setting:Rotatethecameratoappropriateangleandpositionby
）
PTZdirectionalbuttons,selectapresetnumberinthedrop-downlist,andclick" "button.
Callpreset：Selectaneededpresetnumberinthedrop-downlist,andclick""
button.
2
"Cruise"setting
）
"button,thefollowinginterfacewillpop-up
selectacruisenumberinthedrop-downlist,andclick"
：
：
33
Onthe"Cruise"interface,Setpreset,presetName,residencetime,cruisespeed, andclick"Add"toaddnewcruisepreset(supportmultiplepresets),click"Delete"to clearthepreset.
Cruisedelete:Selectaneededcruisenumberinthedrop-downlist,andclick"
delete"toclearthecruise.
3
"Track"setting:Selectatracknumberinthedrop-downlist,clicktrackstart
）
buttonstomakePTZoperation,andclickagaintofinish,trackmemoryoperate successfully.
Calltrack:Selectaneededtracknumberinthedrop-downlist,andclick""
button.
7.
Manual
7.
Manual
7.
7.Manual
Manualrecord
Manualrecordinghavehighestpriority,whateverstateofeachchannelat present,click"Manual",thenallofthecorrespondingchannelwilldoordinary record,asshowninthebelowpicture
record
record
record
：
34
8.
Manual
8.
Manual
8.
8.Manual
Manualsnapshot
Select"Capture"onthemainmenu,Click”“inthelowerrightcornerofthe screentodosnapshotonthepreviewchannel,andchecktheimagepictureinthefile manager.
9.
Video
9.
Video
9.
9.Video
VideoPlayback
Select"Playback"onthemainmenutoenterintochannelselectinterface,check neededreplaychannelsandthevideoimagewillretrieveautomatically,asshownin thethebelowpicture:
snapshot
snapshot
snapshot
Playback
Playback
Playback
35
1
Backward
）
Adjustthetimeofplaybackaudio
：
2）Pause：Pausethecurrentplayback
3）Stop：Stopthecurrentplayback
4
Slow
）
Slowdowntheplaybackspeed(1/2
：
1/4
1/8
、
、
1/16timesoptional
、
5）Fast：Speeduptheplaybackprocess(2、4、8、16timesoptional）
6
Frameplay
）
Sigelframetoplay
：
7）Snapshot：Canbesnapshotforanyplaybackchannel
8）Backup：Makevideobackupforanychannel
9
Fullscreen
）
10
）
Volume
Videoimageplaybackwithfullscreen
：
Adjustthevolumeofplaybackaudio
：
Double-clickchannelbarorclick"Play"buttontoplaythebackupvideo,double-click
singlechannelscreentogetfullscreendisplay
）
36
10.
Screen
10.
Screen
10.
10.Screen
ScreenDisplay
Select“DisplaySetting”inthemainmenu,thefollowinginterfacewillpop-up
Display
Display
DisplaySetting
Setting
Setting
Setting
1
Language
）
English,French,etc.)
2
AutoLogout
）
minutes
3
TVAdjust
）
4）Display：Adjustthebrightness/contrast/saturation/hue/Transparencyofthe
videoscreendisplay
5
Resolution
）
6）RotationInterval：Setrotationintervaltime(seconds),Click“√”infrontof
“EnableSEQ”tomakevideoimagerotationautomatically
Differentkindsoflanguagesforselection(SimpleChinese,
：
Itwilllogoutautomaticallywithnooperationduringsetting
：
AdjusttheratioofCVBSoutputonscreen
：
Selectdifferentresolutionaccordingtotheneed
：
37
11.
Video
11.
Video
11.
11.Video
VideoBackup
Select"Backup"inthemainmenu,click"Refresh"afterlinkUSBexternal attachmenttotestifUSBdevicesidentifiednormally,whenitidentifiednormallythe followinginformationpagewilldisplay:
Backup
Backup
BackupSetting
Setting
Setting
Setting
�Channel：Selectrelevantchannelinthedrop-downlistaccordingtothe
need
�From：Selectastarttimeforvideobackup
�
To
Selectaendtimeforvideobackup
：
Click"Start"tomakecorrespondingchannelvideobackup,andshowthe
backupprocessmeanwhile.
38
12.
Alarm
12.
Alarm
12.
12.Alarm
Alarmsetting
Select"Alarm"inthemainmenu,allthedevicesalarminformationwillappearon
setting
setting
setting
thelist,asshowninthebelowpicture
：
13.
File
13.
File
13.
13.File
FileManage
Select"FileManager"inthemainmenu,thefilelistcolumnwillshowanexternal
storagedevicebackupfilesandlocalcaptureimage,asshowninthebelowpicture：
Manage
Manage
Manage
39
14.
Image
14.
Image
14.
14.Image
ImageSetting
Adjustthevideoimagebrightness/Contrast/Saturation/Huevolumeonthe"Image
Setting
Setting
Setting
Setting"interface,asshowninthebelowpicture
：
40
15.
Screen
15.
Screen
15.
15.Screen
ScreenAspect
AccordingtotheNVRversionthereare4screen/6screen/8screen/9screenfor selection.
Aspect
Aspect
AspectRatio/Segmentation
Ratio/Segmentation
Ratio/Segmentation
Ratio/Segmentation
41
1. Front Panel
Name
Icon
Function
Power Button
To boot up or shut down the NVR
Item
No.
Parameter
Description
①
E-SATA Port
E-SATA HDD Port
②
VGA Port
VGA video signal output port
③
HD Port
HD Video signal output port
④
Network Port
RJ-45 Network port
⑤
USB Port
To connect USB mouse, Mobile HDD,USB Storage drive, etc.
⑥
Power Supply Input
Power supply input port(DC5V/2A)
① ② ③ ④ ⑤ ⑥
The front panel of Super Mini NVR is shown as follow:
2. External Interface Specified
The external interface of Super Mini NVR is shown as follow:
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use