IVS-170BA
Net digital video server with ATA
User’s Guide
User Manual of XtendLan IVS-170BA Net Digital Video Server
CHAPTER 1 INTRODUCTION ................................ ... ....................................... ... ...................................... 4
1.1 IVS-170BA
OMMON APPLICATION
1.2 C
FUNCTIONS AND FEATURES
............................................................................................................................... 5
...................................................................... ............................... 4
CHAPTER 2 INSTALLATION ........... ... ... ...................................... ... ....................................... ... ................. 6
2.1 H
ARDWARE INSTA LLATION
......................................................................................................................... 6
2.1.1 Installation steps ................................................................................................................................6
2.1.2 Installation notice .............................................................................................................................. 6
2.2 HDD I
2.3 P
2.4 T
NSTA LLATION
ANEL DESCRIPTION
HE PIN DEFINITION OF PHYSICAL INTERFACES
................................................................................................................................... 7
.................................................................................................................................... 8
2.4.1 PIN definition of RS-232 serial interface........................................................................................... 9
2.4.2 PIN definition of RS-485 serial interface........................................................................................ . 1 1
2.4.3 PIN definition of Ethernet interface................................................................................................. 1 1
CHAPTER 3 VIDEO SERVER SETUP ......................................... ... ....................................... ... ............... 13
3.1 P
ARAMETER SETUP THROUGH
RS-232
SERIAL PORT
3.1.1 Hyper Terminal Setup ...................................................................................................................... 13
3.1.2 Shell Commands Under Hyper Terminal ......................................................................................... 16
IDEO SERVER
3.2 V
IDEO SERVER RECORDING SETUP
3.3 V
3.4 PTZ
3.5 R
3.6 R
CONTROL
EMOTE SETUP VIDEO SERVER PA RAMETERS
EMOTE SETUP VIDEO SERVER PA RAMETERS
HDD
FORMAT
.......................................................................................................................................... 20
................................................................................................................... 18
........................................................................................................... 19
CHAPTER 4 UPGRADE FIRMWARE...................................... ...................................... .... ...................... 23
4.1 U
SE SHELL COMMAND AND
SE CLIENT SOFTWAR E TO UPGRADE FIRMWARE
4.2 U
TFTP S
ERVER
CHAPTER 5 PPPOE DIALUP OPERATION ........................................................................................... 29
5.1 U
SING
PPP
5.2 C
OE TO ESTABLISH CONNECTION
LIENT ACCESS
DVS
WHEN USING
.................................................................................................. 29
PPP
O
E .................................. ........................... ........................... ....... 30
CHAPTER 6 FREQUENT ASK QUESTIONS................................ ... ....................................................... 32
APPENDIX A SPECIFICA TIONS .... ............................ ........................... ........................ ............................ 33
APPENDIX B GOOD LIST ........................................................................................................................... 34
Index
...................................................................... ...................... 21
...................................................................... ...................... 22
............................................................................................... 23
................................................... ........................................ 9
................................................................................. 13
...................................................................................... 27
Thanks for purchasing the products of our company. If you have any
User Manual of XtendLan IVS-170BA Net Digital Video Server
request or questions, please contact us immediately.
This manual is applicable for IVS-170BA Video Server with one IDE
HDD interface for local recording.
This manual will be updated on a regular basis without additional
specific
manual.
described
notice. The updates will be added into the new version of this
We
will readily improve or update the products or procedures
in
the manual.
- 3 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Chapter 1 Introduction
IVS-170BA series video server adopts embedded Linux OS and TI DaVinci Pro cessor, which
is completely independent of PC platform and, efficiently improves system performance.
Firmware is burned in FLASH, makes the system more steady and reliable.
IVS-170BA series video server has the function to compress the video signal and audio
signal simultaneously into H.264 hardware compression standard; to transmit the
compression stream through network; to real-time video and audio preview; to support stream
protocol (RTP/RTCP, RTSP); to support IE browser, bi-directional voice communication and
support multilingual etc. It also supports one HDD for local recording.
Notes:
The defaulted IVS-170BA is without HDD.
1.1 IVS-170BA functions and features
●
Basic Function:
1. High speed & high compression ratio of H.264 video hardware real-time compression;
2. Multiple security level leads to high system safety;
3. Support one RS-485 interface that can be used to control pan-tilt-zoom and translucent
channel input ;
●
Compression Function
1. Support one or four Channels of video (PAL/NTSC) signal, and can be real-time
hardware compressed in 25F/S (PAL) or 30F/S (NTSC) CIF resolutions independently.
Video is compressed using H.264 standard, and it supports not only variable bit rate
but also variable frame rate. When choosing video image quality, you can also limit
the bit rate of the compression code.
2. Support 4CIF, DCIF, 2CIF, CIF, QCIF resolution.
3. Support OSD .The position of the date and time can be adjusted, and date and time can
be added automatically.
4. Support LOGO, the position of it can be anywhere in the video image.
●
Local Recording Function
1. Support multiple record type, including real tim e, manual record, motion detec ti o n,
external alarm, motion&alarm, motion|alarm.
- 4 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
2. Support one IDE HDDs and each HDD can max support 2000GB.
3. Support FAT32 file system.
4. Support HDD S.M.A.R.T technology.
5. Support cycle or none cycle record.
●
Network Function
1. Support one 10M/100M Ethernet compatible interface;
2. Support TCP/IP protocol; Parameter setting, real-time video & audio previewing, status
examination, alarm through network and store the compression bit rate through network.
3. Support pan-tilt-zoom control such as the turn of PTZ, iris and focus;
4. Support remote upgrading and maintenance;
5. RS-485 interfaces support transparent transmission mode, and remote hosts can control
serial devices through it;
6. Support remote playback and download recorded files.
1.2 Common application
Network digital surveillance, such as factory and the bank etc;
Remote monitoring service for prison, nursery and school;
Intelligent gate system (dynamic record the people i n and out);
Intelligent building and community;
Self-service system of electric power station or telecom base station;
Outdoor equipment monitoring;
Bridge, tunnel and cross road-monitoring system;
Pipeline, warehouse monitoring;
24 hour monitoring of traffic;
Remote monitoring of forest, water and river etc.
- 5 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Chapter 2 Installation
2.1 Hardware installation
2.1.1 Installation steps
1.
Open packing case, and check the integrity;
2.
Take out things needed in installation;
3.
Connect cables needed (video signal input cable, audio signal input cable, RS485 cable
and cable for LAN);
4.
Take out stabilizer power supply and power on.
2.1.2 Installation notice
Please read the following notice carefully. If you have any question,
please
contact us.
Notice:
1.
After Opening the packing box, please check carefully to confirm that the goods in it are
consistent with list;
2.
Please read user's manual carefully before installation;
3.
Please power-off all related equipments before installation;
4.
Please check the voltage of power supply to avoid voltage mismatch;
5.
Installation environmental: Do not use it under humidity and high temperature; to keep
ventilation to vent freely, avoid to be walled up; to keep them horizontally, avoid to set
up in the vibration surroundings.
- 6 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
2.2 HDD Installation
Installation notice
The IVS-170BA has no HDD when leaving factory. Based on the record schedule, you can
calculate the total capacity you need (refer to Appendix A). Please ask the specialist to
disassembly the video server and install HDD.
Installation instrument
One cross screw driver.
HDD installation
1. Open the video box.
2. Place the HDD in the proper space and fix it with screw.
3. Connect the ATA data cable correctly.
4. Plug the HDD power connector.
5. Cover and fix the video server box.
Note: After you install the HDD, you must format it. You can use remote client software to format
the HDD.
- 7 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
2.3 Panel description
Front panel:
Interface Instruction (From left to right in turn)
1. HDD indicator lamp;
2. Tx/Rx indicator lamp;
3. Link indicator lamp;
4. Power supply indicator lamp;
Back panel of IVS-170BA :
Interface Instruction（From left to Right in return）：
1. One line in audio input for voice talk.
2. One audio output for voice talk.
3. One RJ45 UTP network port and one RJ45 RS-485 PTZ port.
4. 4 external alarm input and 2 relay output.
5. 1 channels video input and audio input.
6. Power supply adapter.
- 8 -
2.4 The pin definition of physical interfaces
User Manual of XtendLan IVS-170BA Net Digital Video Server
2.4.1 PIN definition of RS-232 serial interface
The DVS has one RS-232 standard serial interface, with RJ-45
connector.
Its pin definition is as follows (‘I’ means input, and ‘O’ means
output):
(1) When the RS232 interface of the DVS connects with the DTE
equipment,
other of the cable is the DB25 female connector (to DTE). Below is
the
description of the internal connection between RJ45 and DB25.
the
one end of the cable is the 8-pin RJ45 connector (to DVS) and
- 9 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
(2) 25-pin to 9-pin converter’s internal connection is like this:
(3) If you don’t want to use 25-pin to 9-pin convertor to connect
DVS and DTE through RS232 interface, you must use RJ45-DB9 cable. Its
internal connection description is:
(4) When the RS232 interface of the DVS connects with the DCE
(such as MODEM), one end of the cable is the 8-pin RJ45 connector and
- 10 -
the other is the DB25 male connector. Below is the description of the
internal connection between RJ45 and DB25:
User Manual of XtendLan IVS-170BA Net Digital Video Server
2.4.2 PIN definition of RS-485 serial interface
2.4.3 PIN definition of Ethernet interface
(1) PIN definition of the direct network cable connecting DVS and
HUB:
- 11 -
host PC:
User Manual of XtendLan IVS-170BA Net Digital Video Server
(2) PIN definition of the cross network cable connecting DVS and
- 12 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Chapter 3 Video Server Setup
There are three kinds of methods to configure the parameters of video server.
1. Through Hyper Terminal (connect DVS with the PC through RS-232 serial ports)
2. Through client-end application software (connect DVS with PC through network)
3.1 Parameter Setup through RS-232 serial port
Mainly set up IP parameters of the video server through serial port. The defaulted IP address
is 192.0.0.62.
Under the case that the IP address is unknown; the Hyper Terminal (need to connect the serial
ports) can only be adopted to configure IP address and other parameters. Under the case that IP
address is known, TELNET can be adopted to configure IP address and other parameters, and can
also modify the IP address by using client-end software.
3.1.1 Hyper Terminal Setup
Please direct connect the RS-232 serial port of PC with the RS-232 serial port of video server
before configuration (there are RJ45 head and DB9 line in th e pa cking carton)
How to establish the connection with the super terminal connection?
→
Step one: Enter into Hyper Terminal. Click “Start”
“Communications” → “Hyper Terminal” in Windows syste m, and the dialogue box below will
appear (Fig. 3.1.1):
“Programs” → “Accessories”
→
Fig. 3.1.1 newly est ab l i sh a con nec ti o n a nd defi ne t he name a nd icon
- 13 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Step2: To name the connection name and to define the icon. Input a name (e.g. aa), select a icon,
press “OK”, the dialogue box like Fig. 3.1.2 appears.
Fig. 3.1.2 select communication port
Step 3”: to select the communication port. Select “com1” communication port in Fig3.1.2, press
“OK”, the dialogue box as Fig. 3.1.3 will appear.
Fig. 3.1.3 Serial ports parameter setup
Ste p 4: Serial port parameters setup. Set the serial port parameters as the following setup: Bits per
second: 115200, Data bits: 8, Parity: None, Stop bits: 1, Flow control: None. Press “OK” after
finish, the Hyper Terminal interface like Fig. 3.1.4 will appear
- 14 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Fig. 3.1.4 Hyper Terminal Interface
Ste p 5 : To close the window, the Fig. 3.1.5 will appear. Select “Yes” and Fig. 3.1.5 will appear.
Select “Yes” again to have the Fig. 3.1.6
Fig. 3.1.5 to disconnect
Fig. 3.1.6 save Hyper Terminal session
Ste p 6 : Save the Hyper Terminal session for using next time. After saving, it will new establish a
→
“Hyper Terminal” item in the program group “Start”
“Communications”
→
“Hyper Terminal” and it includes all “Connection” name for all Hyper
“Programs”→ “Accessories”
Terminal. Here you have see a “aa.ht”.
- 15 -
→
3.1.2 Shell Commands Under Hyper Terminal
User Manual of XtendLan IVS-170BA Net Digital Video Server
Please use the DTE cable and the DB9/DB25 convertor to connect PC with DVS RS-232
port.
Step 1: Enter into the Hyper Terminal. Click “ Start”
→
“Communications”
“Hyper Terminal”→ “aa.ht”, the Hyper Terminal interface in Fig, 3.1.4 will
appear.
Ste p 2 : Press “Enter” in Hyper Terminal, the prompt “—>” appear, as in Fig. 3.1.7. Under this
prompt the following operation commands to accomplish the setup of the parameters.
→
“Programs”→ “Accessories”
→
Fig. 3.1.7 Hyper Terminal command prompt
Input help, the supported configuration commands can be checked up, as in Fig. 3.1.8.
Fig. 3.1.8 to check command
The following is the introduction of getIp, setIp commands.
- 16 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
getIp
Function：to get the fixed IP, subnet mask, gateway, command port, IP address of PPPoE dialup
(the IP address of PPPoE will be 0.0.0.0 if there is no dialup or dialup is not successful).
Parameter: none.
Grammar format: Enter after input the command
Explanation: Please pay attention whether the inputting letters are capital or low case.
Fig. 3.1.9 to get parameters of IP, PPPoE
setIp
Function：to set the IP, subnet mask and gateway of the device
Parameter：IP address, subnet mask, gateway
Grammar format：setIp IP: mask
Explanation: Please pay attention whether the inputting letters are capital or low case. And
separate the parameters by colons.
Fig. 3.1.10 to set IP
- 17 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
3.2 Video Server HDD format
Please refer to chapter 3.1 to get video server IP address. Then use remote client software to
access video server. Please refer to client software user manual for detail information.
- 18 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
3.3 Video Server Recording Setup
Please use remote client software to remote setup video server local recording parameters.
- 19 -
3.4 PTZ control
User Manual of XtendLan IVS-170BA Net Digital Video Server
Step1: Connect IVS-170BA RS-485 interface with PTZ. Please refer to RS-485 pin
definition. DVS just uses Pin8 (TX+) and Pin7 (TX-) to send PTZ control command.
Step2: You can use remote client software to setup PTZ protocol.
In client software remote setup dialog box, select “Serial Para” tab button. You can select
DVS PTZ parameters in the corresponding dialog box.
Please refer to client software user manual for detail information.
- 20 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
3.5 Remote setup video server parameters
Before the configuration, please make sure that the PC and the video server has been
established the network connection, you can confirm using PING command. Please refer t o the
user manual of DVRDVS client software for detail information.
3.6 Configure parameters through WEB interface
Before the configuration, please make sure that the PC and the video server has been
established the network connection, you can confirm using PING command.
In Internet Explorer open IP address of your IVS. As login use user: "admin" and password: "12345"
Note: If u have problem with installing ActiveX control, you should set in Internet Explorer menu "Tools"
Æ "Internet options" Æ "Security" Æ "Custom level". When you click on "Custom level" find "download
unsigned activeX control" and set "Prompt" options. Now you can install ActiveX control and have a web
access to DVS.
- 21 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Click on "Config" on DVS web interface.
- 22-
User Manual of XtendLan IVS-170BA Net Digital Video Server
Chapter 4 Upgrade Firmware
There are two methods to upgrade the DVS firmware. One is using shell commands to ask
DVS to download firmware from TFTP server. The other is using PC client software.
4.1 Use Shell Command and TFTP Server
Step 1:
Before the update start you should do the follow steps:
1. Download the TFTP server from the internet, such as Cisco TFTP Server. Then put the
firmware in the root directory of the Cisco TFTP Server.
2. Connect the device to the Router.
3. Please use DTE cable to connect devi ce 232 port with COM port of the server PC.
4. Configure the Hy per Terminal. Steps as below.
Enter into start----all programs----accessories------communications-----hyper terminal. Click hyper
terminal.
1) Input the name “xtendlan”. And do the step 1 again. Then enter into fig 4. select COM1 and
click “OK” to enter into fig 5.
2) Modify the bits per second to ‘115200’. and modify the flow control to’ None.’ Finally click
“apply” and “ok” to enter into the hyper terminal main interface.
Fig 3 Fig 4
- 23 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Fig 5
Step 2:
Then reboot the device and press any button in the pc keyboard again and again until the HIK
# come out in the Hyper Terminal interface, show as fig 6. then in put the “print” to check if the IP
of the server and device is correct, also both of them should be in the same LAN. you can use the
command
“set serverip” to modified the server ip
“set ipaddr” to modified the device ip
“set netmask” to modified the mask ip
Show as the fig 7.
- 24 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Fig 6
Fig 7
Step 3:
Input the commend “save” and press enter button. Show as fig 8.
- 25 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Fig 8
Step 4:
Input the commend “update” and press enter button, then space button. After that the update
will start. Show as fig 9
.fig 9
Step 5:
After the update finished, please input the command “reset” and press the enter button. The
device will reset. Show as fig 10.
- 26 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Fig 10
4.2 Use Client Software to upgrade firmware
In the system setup dialog of DVRDVS client so ft ware (refer to client software user manual),
there is a button named “Upgrade”:
- 27 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Select the DVRDVS, Click “Upgrade” button, the foll owing dialog box will be appeared:
Fig.4.21 remote upgrading
Click “Browse” button and select the firmware file. Then click “Upgrade” button, to
complete the upgrading process of the video serv er firmware.
- 28 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Chapter 5 PPPoE Dialup Operation
IVS-170BA video server supports remote access through network, through browser,
through PPPoE or PPP dialup. Before using this function, please make sure that the software you
used in your device support such functions or not.
5.1 Using PPPoE to establish connection
In the local LAN, use the client software remote setup the DVS parameters. The setup dialog
is looked as following:
In the server para meters sub dialog, enable PPPoE function, input the correct PPPoE user
name and PPPoE password. Click “OK” button and “Save Para.” button. The new server
parameters will be saved into video server through network. Reboot the video server, the DVS will
start to dialup the internet. After success, the video server will get a dynamic WAN IP address.
- 29 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
[Explanation] please make sure that ADSL Modem is installed. If it is the first time to set
PPPoE parameters, it needs to reboot video server to establish the connection.
5.2 Client access DVS when using PPPoE
There are two methods:
One is to access using the current WAN IP address of the video server. When the video server is
successful establish the network connection by using PPPoE mode, it will get the WAN IP
address. Y ou can use Hyper Term inal to get the W AN IP address, and access this IP address
through client software.
The other is to access through domain analysis server. By using this mode, you need a PC
with a fixed WAN IP address in the Internet, and there is the domain analysis server software
running in th is PC (actually this PC is the analysis server). We provide such demo DNS software
and SDK.
In the server parameters of video server, there is an item named DNS. Please input the PC
fixed WAN IP address here. When the video server is successfully connection with the internet by
using PPPoE, it will get a dynamic WAN IP address, and send the name and current IP address to
the analysis server. If the client-end software wants to access the video server, it’d first to
- 30 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
connect with the PC used as the analysis server, telling the analysis server which one video server
he wants to access. The analysis server will search all the video servers have been registered, find
out the server with the same name or same serial number, and tell the client-end the WAN IP
address of the video server. After the client-end software get the current IP address, it can establish
the network connection with the video server to get the video images directly.
Here the fixed WAN IP address of PC is 220.184.114.48. We call it as DNS IP. In that the PC,
one demo analysis server software named IPServer is run. It can get the video server information,
including the dynamic WAN IP address of the video server.
- 31 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Chapter 6 Frequent Ask Questions
1, Failure to control PTZ
It is possible that the camera and equipment are not connected through RS485
port, or the wrong configuration of the decoder.
2，certain individual channel picture is un-normal
Please check whether the video cable is well connected with the camera and the
Embedded DVS
3，Possible reasons which can cause the failure of upgrading
Failure of the network, IP address error in the FTP host computer, FTP service is
not been booted by PC, the path to upgrade is not correct, no permission (usually
happened when to upgrade through client-end.)
If the above information cannot meet your demand, please not hesitate to contact
the provider.
- 32 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Appendix A Specifications
IVS-170BA
Video compression H.264
Compression resolution 4CIF, DCIF, 2CIF, CIF, QCIF
Video input 1 Channel
BNC (1.0 Vp-p, 75 Ohm)
Video frame rate PAL: 1/16 --- 25 FPS NTSC: 1/16 --- 30 FPS
Stream type Video stream or Video & Audio stream
Stream bit rate
32Kbps --- 2Mbps and self definition
Audio input 1 Channel
BNC (2.0 Vp-p, 1KOhm)
Audio output 1 Channel RCA
Audio Compression OggVorbis, 16Kbps
Voice interface 1 Channel RCA
Communication interface 1 RJ45 10M/100M Self-adaptable Ethernet Interface
1 RJ45 RS-232 interface
1 RJ45 RS-485 interface for PTZ
HDD interface 1 IDE interface, support 1 HDD
External alarm in 4 ports
Relay out 2 ports
Power Supply 100~240VAC, 6.3A, 50~60Hz
Power Consumption 20W~30W (Without HDD)
Working Temperature
-10°C -- +55°C
Working Humidity 10%-90%
Size 350mm*222mm*78mm
Weight 5.0 Kg (without HDD)
- 33 -
User Manual of XtendLan IVS-170BA Net Digital Video Server
Appendix B Good list
1.
One piece of IVS-170BA video server;
2.
One CD contains client application and user manual;
3.
One power cable;
4.
One DTE cable;
- 34 -
Loading...