Version 1.0 / 202201
DPM-IP71R
7 inch Guard Station
COLOR TFT TOUCH SCREEN WITH HANDSET
OPERATION MANUAL
• Please read this manual carefully before using the product you purchase,and keep it well for future
use.
• Please note that images and sketch maps in this manual may be different from the actual product.
PRECAUTIONS
• Slots or openings in the back of the monitor, are provided for ventilation and
to ensure reliable operation of the video monitor or equipment and to protect if
from overheating. These openings must not be blocked or covered. The monitor
should never be placed near or over a radiator or heat register and should not be
placed in a built-in installation such as a bookcase unless proper ventilation is
provided.
• All parts should be protected from violence vibration. And not allow be impacting,
knocking and dropping.
• For clean the LCD screen, using hands or wet cloth is forbidden.
• Please do the cleanness with soft cotton cloth, please do not use the organic or
chemical clean impregnate. If necessary, please use pure water or dilute soap
water to clean the dust.
• Image distortion may occur if the video door phone is mounted too close to magnetic field e. g. Microwaves, TV, computer etc.
• Please keep away the video door monitor from wet, high temperature, dust, and
caustic and oxidation gas in order to avoid any unpredictable damage.
• Do NOT open the device in any condition, call the administrator for help if there is
any problem or mulfunction happens.
CONTENTS
PARTS AND FUNCTIONS ..................................................................................... 4
Part Names............................................................................................................. 4
Mounting ................................................................................................................. 5
Screen .................................................................................................................... 6
BASIC OPERATIONS ............................................................................................7
Answering a call ..................................................................................................... 7
Basic operation based on Namelist ........................................................................ 8
Namelist congured ........................................................................................... 8
Select a user or a Guard Station to be called .................................................... 8
Select a video door station to be monitored ...................................................... 9
Select a door station to be released the lock..................................................... 9
Basic operation by Input code ............................................................................... 10
Call a user or a Guard Station .......................................................................... 10
Monitor a video door station ............................................................................. 10
Release a door lock .......................................................................................... 11
No Disturb Mode.................................................................................................... 11
Divert Calls ............................................................................................................ 12
View Call Record ................................................................................................... 12
Viewing Videos ...................................................................................................... 13
Playback ................................................................................................................ 14
SETUP INSTRUCTIONS ....................................................................................... 15
Setting date and time............................................................................................. 15
Setting monitor time............................................................................................... 15
Setting ring tone & ring volume ............................................................................. 16
Add IP Camera ...................................................................................................... 16
Delete IP Camera .................................................................................................. 17
Specication .......................................................................................................... 17
PARTS AND FUNCTIONS
Part Names
Handset
Handset Line
Connection port
Lan connector
Speaker
LCD Screen
Power/No Disturb Indicator
Microphone
Unlock Button
Talk/Mon Button
12V
SW-
NC
NC
SW+
Key functions
Item Description
LCD screen
Handset
Power/No Disturb indicator
Microphone • Transmit audio from one station to other stations.
Unlock button • Press to release the door.
Talk/Mon button
Speaker • Send out vioce from the visitor.
Connection port
Lan connector • Use to connect the indoor station to the network.
* Monitor/Home/Call/Manual record/Unlock button will be light up when power on for the unit.
-4-
• See the menu details
• Display videos and images
• Pick up to answer the call
• Show the power status of the system.
• Show the no disturb status.
• Press to communicate hands free with visitor;
• Press to view the outdoor condition in standby mode.
• Use to connect external devices to the indoor station.
PARTS AND FUNCTIONS
Mounting
145~160 cm
The installation height is suggested to 145~160cm.
1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the 2 wire cables to the unit.
3. Mount the unit to the mounting bracket, make sure the unit is absolutely attached to the
mounting bracket.
-5-
PARTS AND FUNCTIONS
Screen
Main screen
The Main menu is your starting point for using all the applications on your monitor.
Touch anywhere of the screen on monitor in standby mode, the Main menu will appear as fol-
low:
Monitor
Touch it to enter video
resource page.
Functions
Touch it to enter functions
resource page.
Current date and time.
Status bar
Displays icons that indicate the
Guard station’s status
Functions screen
On Main menu page, touch
Refresh
Favorites
Touch it to
show the list
your favorited.
INPUT MODE
Touch it to show the keypad.
-6-
[Functions] icon to display the Functions screen.
Tap here to add device to favorites
UNLOCK
Touch it to enter lock
resource page.
SETTINGS
Touch it to enter setup page.
Monitor
Touch it to enter video
resource page.
Namelist
Touch it to enter intercom
selections.
Call secne
Allows you to activate the
functions of No disturb,
Divert.
EVENT
Touch it to review the calling
records.
Playback
Touch it to review the memo
infos.
BASIC OPERATIONS
Communication screen
Displays which door station is
calling.
Displays talking time.
00:10 Door Station1
Answering a call
• When receiving a call, the call tone
sounds, video will be displayed on the
screen if the source is a Video Door
Station, and one video will be recorded
for 10 seconds automatically if there
is video（Note：If without SD card,
picture will be recorded; If with SD card,
video will be recorded）.
• Pick up handset to communicate with
the caller for 90 seconds.
• While communication, press
[Unlock]
button to release the corre-
sponding door lock.
• When the communication ends, hang
up handset.
/
Shows status of talking, unlocking ect.
Red while recording.
00:10 Door Station1
1.If nobody answers the call, the screen will be turned off automatically after 30 seconds.
2.The image will not be displayed when receiving a call from User or Other Guard Station.
3.Manual recording is forbidden during auto recording.
4.While receiving a call,other calling is forbidden.
5.Communication also ends automatically after 90 seconds.
-7-
BASIC OPERATIONS
Basic operation based on Namelist
1.Namelist congured
In default, the Namelist is not included.It
should be configured by Building/Guard
unit number .The following instructions are
available in the condition of the namelist is
created.
1.On Main menu, touch
->Installer->Call_Nbr. And it will appear as
follow: .
2.Input the installer password(de-
faule:66666666), press ‘OK’ to conrm.
66666666
[Setting] icon
4.Input the building number(ex:0000),and
press ‘OK’ to conrm.
0000
2.Select a User or a Guard Station
to be called
1.On Functions menu, touch [Namelist]
item to display Namelist.
Input...
IM 00990001
IM 00990002
IM 00990003
IM 00990005
3.Select BD_Nbr/GL_Nbr.
Call_Nbr
BD_Nbr 0000
GL_Nbr 1
Name
Global_Nbr -
Local_Nbr -
-8-
DPM-IP71R
IP address
Call_Nbr
Parameter
Upgrade
Onsite tools
2.Select a Name by touching it,calling is
activated immediately.No image will be dis-
played on screen.
Input...
IM 00990001
IM 00990002
IM 00990003
IM 00990005
BASIC OPERATIONS
3.If nobody answers the call within 30 sec-
onds,it will stop calling automatically and
shut off the screen.Or touch icon to stop
calling directly.
4.If the call is answered,communication
is starting.
5.When the communication, hang up
handset or press
[Close] button.
3.Select a Video Door Station
to be monitored
1.On Functions menu, select [Monitor] to
display Door station list.
3.The image of outdoor condition will be
displayed on screen,see as follow:
00:10 [9002]CDS2
4.During monitoring, these operations are
available:
-Pick up handset to talk with visitor;
-Press
lease the door lock;
-Press
/ [Unlock] button to re-
[Close] button to end monitoring.
4.Select a door station to be
released the lock
1.On Functions menu, select [Monitor]
to display Door Station list.
2.Select a Video Door Station by touching
it,minitoring is activated immediately.The
monitor time is 30 seconds.
2.Select a Door Station by touching
[Unlock] icon to release the correspond-
ing lock.
-9-
BASIC OPERATIONS
Basic operation by Input code
The another way to activate the functions of calling, monitoring, unlocking is by inputting code
via the keypad on screen.
1.Call a User or a Guard Station
On Functions menu, select [Namelis],
touch [Input] to display Search screen.
Search by digital numbers:
For example,maybe you just remember
the room code including the numbers of
32,input the code 32 on input box,then
touch the key “OK”, all Namelist which is
including the code of 32 will be displayed.
32
IM 00990032
IM 00320002
IM 00990323
IM 00932005
Search by name:
Maybe you just know the name of User
or Guard Station. For example,input the
name “jim” on input box,then touch the
key “OK”, all Users or Guard Stations
called “jim” will be displayed.
JIM
JIM 00990032
JIM 00320002
JIM 00990323
JIM 00932005
Select the target you want to activate
calling.
2.Monitor a Video Door Station
1.On Functions menu, select [Monitor],
touch [Input] icon to display Search
screen.
Select the target you want to activate
calling.
-10-
2.The inputting method is the same as
the section of Calling User or Guard
Station.
3.Select the Video Door Station you want
to activate monitoring.
BASIC OPERATIONS
3.Release a door lock
1.On Functions menu, select [Monitor], touch [Input] icon to display Search screen.
2.The inputting method is the same as the section of Calling User or Guard Station.
3.Select the Door Station you want, then press
door.
[Unlock] button to open the corresponding
No Disturb Mode
During a certain period, if you don't want to be disturbed, you can go to set DND mode.
1. From the Functions menu, select "Call scene" item.
2. Select the desired tap.
- No disturb 8H: Set to no disturb mode 8 hours.
- No disturb always: Set to no disturb mode always.
Note:
* The no disturb indicator turns from green to red, to indicate that the no disturb function has
been activated.
* This function will perform immediately if selected,and the status bar on main menu interface
will show "
" icon.
-11-
BASIC OPERATIONS
Divert Calls
The calling from door station can be diverted to your smart phone. please note that this func-
tion should be supported by SIP network.
1. From the Functions menu, select "Call scene" item.
2. Select the desired tap.
- Divert call if no answer: If nobody answers the call in 30s when receives call
from door station, diverts the call to the smart phone.At this mode,the monitor
will always open the screen and show image from door station during
diverted, if the monitor answers the call at this time,diverted will conclude at
once.
- Divert call always: When receives call from door station, diverts the call to
smart phone directly. At this mode, the monitor will shut off the screen after
diverting successfully, but you can still use it in normal.
Note:
* If divert the call to smart phone via Sip sever, need to choose one.
* This function will perform immediately if selected,and the status bar on main menu interface
will show "
" icon.
View Call Record
The Guard Station records information about calls you have answered, missed, and made, and
saves it in the call record. See the following steps to view the call record.
1. From the Functions menu, select "Event" item.
2. Select the desired tap.
Miss called: Displays calls you received but did not answer.
Incoming called: Displays calls you answered.
Outgoing called: Displays calls you made.
3. Browse the call record as needed.
4. When nished, tap
-12-
, return to previous menu.
BASIC OPERATIONS
Controlling Records
The following controls are available by tapping the screen while playing a record.
• Plays the record.
• Plays the next record.
• Plays the previous record.
• Delete record.
• Delete conrm.
?
View Videos
Videos are possible to be recorded, and both automatic recording and manual recording are
available. To record videos,SD card is needed.
Automatic recording
Recording starts immediately when receiving a call.
• While recording, “
• Capture one video automatically for each calling.
” displays on the screen.
00:10 Door Station1
-13-
BASIC OPERATIONS
The recorded videos are stored in SD card directly.
* Max. 32G Micro SD card is supported.
Note:
* Automatic recording function cannot be cancelled.
* Automatic recording does not available while monitoring a door station. To save videos while monitoring,
see manual recording below.
Manual recording
While be called,talking or monitoring,Touch
Note:
* Manual recording is available at any time.
* Manual recording cannot be performed during automatic recording.
1.The auto recording time limited is 10s. The videos will be saved on micro SD card directly.
2.The manual recording time is the time for ending manual recording.max.10s for each manual recording.
3. A brand new SD card needs to be formatted by the monitor, then it can be used for video recording.
button when an image is displayed.
Playback
The recorded videos can be playback on Guard Station. Follow the steps:
• On Functions menu page, select [Playback], most recent recordings are displayed.
• Touch " < " or " > " to scroll through recordings,touch “
To stop
Touch
Press
-14-
icon on the screen during play to return to last page.
[Home] button to return to main menu page.
” to delete current video.
SETUP INSTRUCTIONS
Setting date and time
You can correct the current date at and time any time by following the procedure below.
1.On main menu page, touch
setting page(or Click on the lower right corner of the screen ).
2.Touch the setting target of Date mode, Time mode, Date, Time to adjust.
3.When the setting has nished, touch
[Setting] icon ->[General] ->[Date&Time], to enter Clock
to save the settings.
Call tune
Ring timing [35s]
DS ring [01]
CDS ring [01]
OS ring [01]
01/02
Call tuneRing volume [01]
General
Installer
Manager
Ext.Unit
General
Language [English]
Monitor timing [030]
SD card
About
Call tuneDate and time
General
Installer
Manager
Ext.Unit
Clock setting
Date mode MM_DD_YYYY
Time mode Time_12H
Date 2022-01-12
Time 15:50
Internet time
General
Setting monitor time
The monitor time can be changed at any time. The setting range is 30s,60s,90s,120s,150,180s
,210s,240s,270s,300s.
* 30s is the default monitor time.
1.On main menu page, touch [Setting] icon ->[General] ->[Monitor timing], to enter
Monitor timing page.
2.Select the times you want.
3.When the setting has nished, touch
Call tune
Ring timing [35s]
DS ring [01]
CDS ring [01]
OS ring [01]
to save the settings.
01/02
Call tuneRing volume [01]
General
Installer
Manager
Ext.Unit
General
Language [English]
Monitor timing [030]
SD card
About
Call tuneDate and time
General
Installer
Manager
Ext.Unit
Monitor timing
30(s)
60(s)
90(s)
120(s)
150(s)
01/02
General
* Press
[Home]
button to return to main menu page or touch
“ Return”
key to return to last page.
-15-
SETUP INSTRUCTIONS
Setting ring tone&ring volume
The ring call tone can be set individually to distinguish different calling source. Total 22 tones
can be selected.
1.On main menu page, touch
ring]/[Message ring]/[Doorbell ring]/[Intercom ring]/[Innercall ring]/[Alarm ring].
[Setting] icon ->[Ring volume]/[DS ring]/[CDS ring]/[OS
Call tune
Ring timing [35s]
DS ring [01]
CDS ring [01]
OS ring [01]
* After selected the value,touch
Add IP Camera
On main menu page, touch
search]/[Add by manual].
Call tune
Ring timing [35s]
DS ring [01]
CDS ring [01]
OS ring [01]
01/02
Call tuneRing volume [01]
General
Installer
Manager
Ext.Unit
Call tune
Doorbell ring [03]
Intercom ring [20]
Innercall ring [01]
Alam ring [11]
02/02
Call tuneMessage ring [16]
General
Installer
Manager
Ext.Unit
Select message ring
[07]Elise.wav
[08]Beop.wav
[09]Warm.wav
[10]Dancing.wav
02/05
Call tune[06]Tender.wav
to save and perform the settings.
[Setting] icon ->[Ext.Unit]->[IPC camera]->[Add]->[Add by
01/02
Call tuneRing volume [01]
General
Installer
Manager
Ext.Unit
Ext.Unit
Call tuneIPC camera 0
General
Installer
Manager
Ext.Unit
Items
Items
Add
Delete
Edit name
Sync
-16-
Add
Add by search
Add by manual
Items
Add
Delete
Edit name
Sync
SETUP INSTRUCTIONS
Delete IP Camera
On main menu page, touch [Setting] icon ->[Ext.Unit]->[IPC camera]->[Delete].
Call tune
Ring timing [35s]
DS ring [01]
CDS ring [01]
OS ring [01]
01/02
Call tuneRing volume [01]
General
Installer
Manager
Ext.Unit
Ext.Unit
Call tuneIPC camera 2
General
Installer
Manager
Ext.Unit
Items
[192.168.1.172] IP-CAM1
[192.168.1.227] IP-CAM2
Items
Add
Delete
Edit name
Sync
?
Delete
[192.168.1.172] IP-CAM1
[192.168.1.227] IP-CAM2
Delete
[192.168.1.172] IP-CAM1
[192.168.1.227] IP-CAM2
Items
Add
Delete
Edit name
Sync
Specication
●Power Source : Power-over-Ethernet (IEEE 802.3af Class 0)
●LAN Interface : 10 BASE-T / 100 BASE-TX Ethernet (RJ-45)
●Monitor screen: 7 Inch digital color TFT
●Display Resolutions: 800*480 resolution
●Wire Type: Cat-5e or Cat-6
●Wiring Distance : 100m (Approx. 330')
Items
Add
Delete
Edit name
Sync
●Operating temperature: -10 to +50 (oC)
●Dimension: 193(H)×235(W)×55(D)mm
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this
manual are preserved.
Loading...