2 WIRE SYSTEM
DPM-D247TW
4.3" WI-FI MONITOR WITH TOUCH SCREEN
USER MANUAL
DPM-D247TW / 201711
• Please read this manual carefully before using the product you purchase,and keep it well for future
use.
• Please note that images and sketch maps in this manual may be different from the actual product.
CONTENTS
PARTS AND FUNCTIONS ..................................................................................................... 3
Front panel ............................................................................................................................. 3
Mounting ................................................................................................................................. 4
Screen .................................................................................................................................... 5
BASIC OPERATIONS ............................................................................................................ 6
Answering a call ..................................................................................................................... 6
Monitoring ............................................................................................................................... 9
Recording .............................................................................................................................. 10
Calling other monitors(Intercom) ........................................................................................... 11
Viewing calling records .......................................................................................................... 12
Opening staircase light .......................................................................................................... 13
No disturb function................................................................................................................. 13
Transferring call ..................................................................................................................... 14
SETUP INSTRUCTIONS ....................................................................................................... 15
Ring tone setting.................................................................................................................... 16
General setting ...................................................................................................................... 16
Date and time setting........................................................................................................ 17
Changing the display language ........................................................................................ 17
Setting monitor time.......................................................................................................... 18
SD card............................................................................................................................. 18
Restoring to default setting ............................................................................................... 19
About ................................................................................................................................ 19
Installer setting ...................................................................................................................... 20
DIP Switcher Set Address ................................................................................................. 20
Enabling/Disabling intercom function ................................................................................ 21
Software upgrade .............................................................................................................. 21
System setting ................................................................................................................... 21
Wi-Fi setting ........................................................................................................................... 22
Wi-Fi sub monitor regist......................................................................................................... 24
Smart phone regist ................................................................................................................ 25
SIP Cong ............................................................................................................................. 27
PARTS AND FUNCTIONS
Front panel
[1]
[5]
[2]
[3]
[6]
[4]
Function keys and status LEDs
NO. Item Description
[1] Digital LCD touch screen • See the next page for details
• Press to shut o the screen
• Blink times when plug in power
• Press to communicate hands free with visitor
• Press to view the outdoor condition in standby mode
• Blink when receive a call
[3]
Close button/LED
Talk/Mon button/LED
Unlock button/LED • Press to release the door
No disturb button/LED • Press to enter the call scene page in short cut
-3-
PARTS AND FUNCTIONS
Mounting
Mounting box
(size:86x86mm)
The unit
145~160 cm
Mounting screw
x 2(included)
2 wire cable
Mounting bracket
The installation height is suggested to 145~160cm.
1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the 2 wire cables to the unit.
3. Mount the unit to the mounting bracket, make sure the unit is absolutely attached to
the mounting bracket.
Terminal description
L1,L2: Bus line terminal.
POW,GND:12~18V extra power connection port.
Ring,GND: Extra buzzer connection port.
SW+,SW-: Extra door bell call button connection
port.
DIP switches: Total 6 bits can be congured.
• Bit1~Bit5: User Code setting switch.
• Bit6: Video impedance matching switch.
-4-
POW
GND
ON DIP
1 2 3 4 5 6
RING
SW-
SW+
DIP Switches
L2L1
PARTS AND FUNCTIONS
Screen
Main Menu
The Main menu is your starting point for using all the applications on your monitor.
Touch anywhere of the screen on monitor in standby mode, the Main menu will appear as follow:
MONITOR
Touch it to view outdoor condition.
Current date and time
Status area
LIGHT
Touch it to light up the
staircase light via RLC.
Function status
Icon Meaning Description
Missed call
No disturb
Call transfer
• Display when there is missed call unread.
• Touch it to review the missed call in shortcut.
• Display when activate the function
• Touch it to enter Call Scene page in shortcut.
INTERCOM
Touch it to enter intercom
selections.
CALL RECORD
Touch it to see calling in/calling
out records or missed calls.
SETTINGS
Touch it to enter setup page.
CALL SCENE
Touch it to activate the functions of
Mute,Left message and Divert call.
SIP server connection active
SIP server connection disabled
SIP server connection active and
Wi-Fi connection active and not
Wi-Fi connection disabled
Wi-Fi connection active and
Touch it to enter SIP server information page
in shortcut.
Touch it to enter Wi-Fi setting page in shortcut.
-5-
BASIC OPERATIONS
While talking with a door station
Displays which door station is
calling.
Displays talking time.
5 direction pad button,
zoom&pantilt the picture.
Note: 1. The 5 direction pad operation should make eective with sh-eye door station.
2. The following instructions are based on sh-eye door station.
Answering a call
00:10 DS-1
Shows status of talking,unlocking
ect.
Blinks while recording.
1. Touch TALK/MON button to answer the call, the LED lights up. To end the call touch
TALK/MON button again.
-6-
BASIC OPERATIONS
2. If wants to see greater detail about visitors,move to the desired position by touching
on the screen to view the image in pantilt & zoom mode.
-7-
BASIC OPERATIONS
9
6
5
3. If necessary, during the call touch >> key to display the adjustment icons. Touch the corre-
sponding icons to adjust the parameters.
Adjust the image colour
Adjust the image brightness
Adjust the speaker volume
*The setting range is 0~9.
or
4. Touch Unlock key or Unlock icon on screen to open the Entrance Panel door lock.
The icon will be displayed on screen, to indicate that the door lock has been released.
-8-
BASIC OPERATIONS
Monitoring
It’s possible to see the condiction of entrance at any time.
00:10 DS-1
1.Touch to display the door stations/cameras in your system.
2.Touch to activate the desired
door stations/cameras.
3.The image is displayed for
30s.
*Touch TALK/MON button on panel in standby mode to monitor the master door station in
shortcut.
Video Quard Monitoring:
If the system installs multi cameras via QSW. Video quad monitoring is available.
CAM-1 CAM-2
CAM-3 CAM-4
1.Base on the last section,touch“ > ”
icon twice to enter the third page.
2.Touch QSW1 item to activate
the monitoring.
3.The four images are displayed
at the same time.
Touch one of video to switch to monitor the corresponding camera Independently.
To end monitoring
Touch “< ” icon on the screen, or press TALK/MON button on the panel,or press CLOSE
button on the panel.
* Monitoring also ends automatically after 30 seconds.
Note: During monitoring, images can be viewed, but audio cannot be heard.
During monitoring, manual recording is available.
During monitoring, touch
TALK/MON button on panel to begin communication with
outdoor person.
-9-
BASIC OPERATIONS
Recording
Videos and images are possible to be recorded, both automatic recording and manual recording are available.
Blinks
Automatic recording
• Recording starts after 3 seconds while
receiving a call.
• While recording, “ ” blinks on the
screen.
• Capture one video/image automatically
for each calling.
Note:
* Automatic recording function cannot be cancelled.
* Automatic recording is not available while monitoring a door station. To save videos/images while
monitoring, see manual recording below.
00:10 DS-1
REC
Manual recording
While being called,Touch icon when an image is displayed.
Note:
* Manual recording is available at any time when
* Manual recording is allowed in pantilt & zoom mode.
* Manual recording cannot be performed during automatic recording.
* If a micro SD card is installed, the recording is video, and recording time limited is 10s. The videos
will be saved in micro SD card directly. Otherwise,the recording is image. The image is stored in
the built-in memory rst.
* A brand new SD card needs to be formatted by the monitor, then it can be used for video recording.
*
If a micro-SD card is installed, images can be copied to SD card.
* Max. 32G Micro SD card is supported.
-10-
icon is on the screen.
BASIC OPERATIONS
Calling other monitors(Intercom)
It is available to communicate with another monitor installed in another room of the apartment
or with a monitor of another apartment or with a Guard Station.
1.Touch to display the available intercoms.
2.Touch to activate the communication with the desired intercom.
00:10 InnerCall
The LED TALK/MON lights up to indicate that the call is active.
When the recipient answers the call, communication is started.
3.Touch
Note: when a call is received from the outdoor station while the indoor monitor is in “intercom”
mode, the system follows the priority rules and ends the intercom call.
TALK/MON button to end the intercom call.
-11-
BASIC OPERATIONS
Viewing calling records
All calls from door station or other monitors will be recorded and can be reviewed afterwards.
1.Touch to display the available calling records.
Current call records
Exit
Missed call
Be called in
Outgoing call
Manual recordings
Scroll to last page
Scroll to next page
Page slider
Calling source
Calling date&time
2.Touch to see greater details.
* When the capacity is full,the oldest calling records will be deleted automatically to make room
for new records.
Current videos/images
Total videos/images
Image
2017/10/25/18:07 DS3
1/86
Scroll to next page
Scroll to last page
Delete the selected recording
Return to last page
-12-
BASIC OPERATIONSBASIC OPERATIONS
Opening staircase light
Note: The staircase light should be connected on the system, and this function should be supported by RLC. Please refer to RLC user instruction in detail.
Touch [Light] icon on main menu page, the staircase light will be turned o automatically after
60 seconds.
*Touch [Light] icon again to turn o the light.
No disturb function
It is available to forbid the calling from outdoor station or other monitors.
1.Touch to display the call scenes.
-13-
BASIC OPERATIONSBASIC OPERATIONS
No Disturb 8H: The calling from door station or other monitors will be forbidden for 8 hours.
No Disturb Always: The calling from door station or other monitors will be forbidden all the
time until the function is released.
* This function will perform immediately if selected,and the status area on main menu page will show
" icon. The LED will light up in red.
"
Transferring call
The calling from door station can be diverted to your smart phone.
Scroll to next page
1. Divert Call If No Answer: If nobody answers the call in 30s when receives call from door
station, diverts the call to the smart phone.
At this mode,the monitor will always open the screen and show image from door station during diverted, if the monitor answers the call at this time,diverted will conclude at once.
2. Divert Call Always: When receives call from door station, diverts the call to smart phone
directly.
At this mode, the monitor will shut o the screen after diverting successfully, but you can still
use it in normal.
* If divert the call to smart phone via Sip sever, need to choose one.
* The status area on main menu page will show "
-14-
" icon.
SETUP INSTRUCTIONS
The Main menu contains the “Settings” icon.
Touching it to get more setting items.
1.Touch to enter the settings section.
Exit
Ringtone setting
General setting
Installer setting
Wi-Fi setting
[04]
[09]
[12]
[22]
Scroll to last page
Scroll to next page
Current setting value
2.Touch the icon for the desired setting item:
Ring volume-Door1/2/3/4 calling tune-DoorBell calling tune-Intercom calling tune
-InnerCall calling tune-GuardCall calling tune
Date and time-Language-Monitor time-SD card-Restore to default-About
Current address-Intercom enable-Fw upgrade-System settings
Wi switch-Wlan setting-Wireless device Regist-IP/Smart phone regist-Sip cong
-15-
SETUP INSTRUCTIONS
Ring tone setting
The ring call tone can be set individually to distinguish dierent calling sources. Total 22 tones
can be selected.
Scroll to next page
[04]
[09]
[12]
[22]
Ring volume: adjust the ringtone volume.
Door1/2/3/4 calling tune: call tone from door1/2/3/4 entrance panel.
DoorBell calling tune: call tone from doorbell.
Intercom calling tune: call tone from an intercom of another apartment.
InnerCall calling tune: call tone from an intercom in your apartment.
GuardCall calling tune: call tone from the Gurad unit.
Touch the setting item to
select the call tone.
General setting
This section contains the general settings and device information.
-16-
SETUP INSTRUCTIONS
Date and time setting
The current date and time can be modied at any time.
Date mode: 2 display mode: month/date/year and date/month/year
Time mode: 2 display mode: HOUR_12 and HOUR_24.
Date: touch it to set the date .
Time: touch it to set the time.
Time zone: touch it to set the time zone in your country.
Time auto update: Disable: should set the time manually. Enable:
time
MM_DD_YYYY
HOUR_12
xxxx_xx_xx
xx:xx
can synchronize the system
Changing the display language
The default language can be customized. But you can change it to your desire language at any
time.
*If the target language is not found in the window, touch > icon to scroll next page.
-17-
SETUP INSTRUCTIONS
Setting monitor time
The monitor time can be changed at any time. It's available to set 30s, 60s, 90s, 120s, 150s, 180s,
210s, 240s, 270s, 300s.
* 30s is the default monitor time.
SD card
If the device insert an SD card, the SD card info can be reviewed on the device.
SD information:SD card memory info.
Copy image: touch it to copy the recorded images to SD Card.
Firmware Update: update the device rmware.
-18-
SETUP INSTRUCTIONS
Restoring to default setting
The restore to default function allows the user to recover the settings to factory setting.
About
The device information will be listed.
Device Type: the device name.
S/W Ver: the software version.
Serial No: the device serial number.
Node Id: Node ID number.
IP Address: the device IP address.
H/W Address: the device Mac address.
Subnet Mask: the device subnet mask.
Default Route: the device default route.
DT Address: the device code number.
M/S Code: the device is a master monitor or sub monitor.
Online: the numbers of sub monitor.
-19-
SETUP INSTRUCTIONS
Installer setting
This section contains the device address setting and system settings.
[01]
Enable
DIP Switcher Set Address
The DIP switches are used to set the user code for each monitor.Total 6 bits can be congured.
• Bit-1 to Bit-5 are used for user code setting. The value range is from 0 to 31, which have 32
different codes for 32 apartments.
• When multi monitors need to be installed in one apartment, these monitors should use the
same user code, and the master/slave mode should be set on the monitor. (Details refer to
the section of Setting Slave Monitor)
• Bit-6 is bus line terminal switch, which should be set to “ON” if the monitor is at the end of
bus line, otherwise be set to “OFF”.
Bit-6 switch setting
ON DIP
1 2 3 4 5 6
ON
ON(1)
=
OFF(0)
ON
=
Bit state Setting Bit state Setting
ON DIP
1 2 3 4 5
When monitor is not
at the end of bus line.
6
This monitor is assigned with DIP setting instructions.Total 32 DIP codes.
[01]
Enable
-20-
ON DIP
1 2 3 4 5
When monitor is at
the end of bus line.
6
SETUP INSTRUCTIONS
Enabling/Disabling intercom function
It’s available to forbid or activate the intercom function.
[01]
Disable
*In default setting, intercom function is disable for the monitor.
Software upgrade
It’s available to upgrade the device software via SD card.
Touch to activate the upgrade, it will upgrade automatically.
System setting
This section will be reserve.
-21-
SETUP INSTRUCTIONS
Wi-Fi setting
It is possible to connect the device to your Wi-Fi network.
1. Touch to activate Wi-Fi.
[OFF]
[00]
[01]
[ON]
[00]
[01]
2. Touch Wlan setting item to enter Lan setting page.
3. Select the domestic network to which you want to connect the device.
-22-
SETUP INSTRUCTIONS
5.Enter the password (if required).
******
6.Enter the password (if required). After nish, press “OK” to save and return to last page.
******
7.Touch Connect/Disconnect item to activate the network connection.
-23-
SETUP INSTRUCTIONS
Wi-Fi sub monitor regist
It is possible to add slave devices to your home.
1. Touch to activate the register.
[OFF]
[00]
2. Touch to manage the device.
3. The device can get the Slave ID from Wi-Fi sub monitor automatically in home Wi-Fi.
-24-
SETUP INSTRUCTIONS
4.If register is success, the Wi-Fi sub monitor will be added to master device .
Smart phone regist
It is possible to add the smart phone to your home as a sub monitor.
1. Touch to activate the register.
2. Touch to manage the phone.
-25-
SETUP INSTRUCTIONS
3.Touch to add phone address.
192.168.169.199
4.Input the phone IP address(this address is received from your phone). Make sure your mobile
phone is connected to Home WIFI. After nish, press “OK” to save and return to last page.
192.168.169.199
5.Touch Add Ip/Smart phone to conrm the phone register, then touch “return” icon to return
last page.
6.If register is success, the smart phone will be added to master device.
-26-
SETUP INSTRUCTIONS
SIP Cong
It’s available to transfer the call to smart phone while out of home via SIP server. Note that the
divert mode should be selected, please refer to P14.
SIP server: the address of SIP sever(touch to edit).
Divert divert: the divert account for smart phone(touch to edit).
Divert password: the divert password for smart phone.
Local account: the local account(touch to edit).
Local password: the local password(touch to edit).
SIP port: the protocol port(touch to edit).
Remote mon code: the input code for smart phone monitoring door station(touch to edit).
Manual register:
UseDefault: restore to default SIP account and password(touch to activate).
*About the APP application, please contact our technical engineer for detail.
clear the account, and then manual register.
-27-
APPENDIX
Specication
Power supply: DC 20~28V
Power consumption: Standby 1.8W; Working 5.4W
Communication: Hands-free
Screen: 4.3 Inch digital color TFT
Display Resolutions: 480 x 272 pixels
Mounting: Surface wall-mount
Material: Glass panel
Color: White
Wiring: 2 wires, non-polarity
Dimension: 145(H)×145(W)×23(D)mm
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this
manual are preserved.
Loading...