DPK-W100
Wireless colour video doorphone
User manual
Contents
Features……………………………………… …………………………… 1
Components checklist……………………………………………………1
Products
description………………………………………………………2
Cradle………………… ………………………… ………………… ……… 3
Charger fixing
procedure…………………………………………………4
Button
description…………………………………………………………5
ID NO.
display………………………… ……… ………… ……… ………5
Coding………………………………………………………………………5
Receive
code………………………………………………………………6
Code
clearing………………………………………………………………7
Setting of ring
tone………………………………………………………7
B
rightness adjustment
…………………………………………………8
Surveillance…………………………………………………………………8
Basic
operation ……………………………………………………………9
Night-vision operation………… ………………………………………11
Unlocking
time
setting…………………………………………………11
Installation……………… ……… ……… ………… ……………………12
Lock
connection…………………………………………………………13
Technical
specifications… … … … … … … … … … … … … … … … … 14
Trouble
shooting…………………………………………………… 15
Propagation
of radio waves… … … … … … … … … … … … … … … 16
Battery
specifications… … … … … … … … … … … … … … … … … … 16
Notes… … … ………………… … … … … … … … … … … … … ………… 17
1
Features
● Wireless colour video doorphone
● Mobile handset with 2.4 TFT-LCD screen
● Identify and screen callers
● Unlock doors remotely for visitors
● Range in free field 300 meters
● 12 selectable ringtones
● Handset to handset communication (Paging)
● Infra red camera in outside call station to see callers at night
● Expand to a 2-way system by adding a call station & handset
● Rechargeable battery via mini USB interface
● Standby status 72 hours
● Easy to install
● Built-in surveillance mode function
Components checklist
Package contents:
one outdoor camera/call station, one handset monitor (include Li-ion
battery), one power adaptor for call station (DC5V, 1A), one charger
for handset monitor (DC4.5V, 0.8A), cradle and some screws for
fixing the call station on the wall.
Components description:
Handset monitor
Charger
Call station
Power adaptor
Cradle
2
Products description
Speaker
2.4G antenna
ON/OFF
Status
indicator
2.4 inch LCD
Unlock
Monitor
Brightness+
Brightness-
Code clearing
Reset
Answer
Microphone
Microphone
Camera
Speaker
Status indicator
Call
3
Cradle
1.Fixed on the desk 2.Fixed on the wall
4
Charger fixing procedure
(3)
(5)
(4)
(6)
5
Button description
“ON/OFF”button: It is used to power on/power off of wireless
handset monitor.
“ ”: Is used to:a) answer the calls when visitors press the call
button in outdoor call station; b) as the confirmation button when
performing the ringing tone selection; c) as the coding button when
carrying out coding between the components.
“ ”: In standby status, it is used to enter the menus of ringing tone
selections; in talk status, it is used to increase brightness.
“ ”: In talk status, it is used for reducing brightness.
“ ”: Is used to switch on the camera in outdoor call station in order
to monitor outside in standby status.
“ ”: It is used to operate an electric lock release when the monitor
is in the “talk” status.
“ ”:Is used to clear the previous code .After this operation ,you
should carry-out the coding procedure between or among the call
stations and handsets again.
“ ”：Make it return to the default status .After this operation ,then
it will enter the OFF status.
ID NO. display
Press the “ON/OFF” button when the handset monitor is in OFF
status, until the 2.4 inch TFT-LCD displays “Welcome” and sounds
two “Di Di” tones, then release the button. It means that the handset
monitor is entering into the ON status.
Press the “ON/OFF” button when the handset monitor is in ON status,
then the 2.4 inch TFT-LCD will show “Goodbye”and create two “Di Di”
tones, then release the button. This indicates that the handset
monitor is entering into OFF status.
When the outdoor camera is powered, a single “Di” tone indicates
that call station 1 is being viewed. If a dual “Di Di” tone is sounded
this confirms that the call station 2 is being viewed.
Coding
1).Press the “ ” and “ ” buttons at the same time when the
handset monitor is in power-on status, until the screen shows the
6
letters “Configure code”, then release the buttons and it will enter
the coding status.
2).At this time, press the call button in outdoor camera when it is in
standby status until the red indicator remains lit and creates two
sounds “Di Di ”, then release the button and it will enter the coding
status.
3)If the handset monitor shows the letters “successed” within 8s, the
coding is successful and the call station and handset monitor have
successfully paired; at this time, the outdoor call station will create 3
sounds “Di Di Di”. If the handset monitor shows the letters "failed"
within 8S, then it means that the coding is failed and the outdoor
station will have no response.
Note: After successful coding, then the outdoor camera and handset
monitor are the 1st outdoor camera and 1st handset monitor
respectively; if coding is failed, you should do the coding again.
Receive code
(only required when adding one more call station or
one more handset monitor.)
Adding one more handset monitor :
1).Press the “ ” and “ ” buttons at the same time, when the 1st
handset monitor is in ON status until the screen shows “transmit
code”, then release the buttons and enter the “transmit code” status.
2).On the additional handset(2nd) after “transmit code” is displayed
on the 1st handset, press the “ ” and “ ” buttons at the same time
on the 2nd handset when it is in ON status until the screen shows
“receive code”, then release the buttons and enter the “receive code”
status, then press the “ ” button at this time in 2nd handset
monitor. If it shows “successed” on the handset, it means that the
coding has been successful.
Adding one more outdoor call station :
1).Press the “ ” and “ ” buttons when the handset is in the ON
status until the screen shows “transmit code”, then release the
buttons and enter the “transmit code”status.
2).Then press and hold the call button in outdoor call station until
7
you hear the two “Di Di” tones. Then release the call button in outdoor
call station (Do not release until you hear the two Di Di tones ). Then
press the “ ” button in the handset at this time. If it shows
“successed” on the handset, the coding has been successful.
Adding one more outdoor call station and one more
handset monitor:
1).Press the “ ” and “ ” button when the 1st handset monitor is in
ON status until the screen shows “transmit code”, then release the
buttons and enter the “transmit code” status .
2.Then press the “ ” and “ ” buttons at the same time when the
2nd handset monitor is in ON status until the screen shows “receive
code”, then release the buttons and enter the “receive code” status.
Press the “ ” button at this time on 2nd handset monitor. If it shows
“successed” on the handset, then it means that the coding is
successful.
3).On the 2nd handset, press and hold the “ ” and “ ” buttons
when the 2nd handset monitor is in ON status until the screen shows
“transmit code”, then release the buttons and enter the “transmit
code” status.
4).During this time, press the call button in 2nd outdoor call station
until you hear two DiDi tones. Then release the call button in the
outdoor call station(Do not release the button until you hear the two
DiDi tones). If it shows “successed” in the handset, it means that the
coding has been successful.
5).If all the coding is successful, press the “ ” button in the 1st
handset monitor to return to the standby status .
Code clearing
Handset monitor: Keep pressing the “ ” and “ ” buttons when
the handset monitor is in OFF status. At the same time, then press
the ON/OFF button in the handset monitor together until the screen
displays “clear code ” and creates one “Di” sound (still keep pressing
the “ ” and “ ” buttons when you press the ON/OFF button). This
means that code clearing is successful. It will be in OFF status after
releasing the buttons.
8
Outdoor call station:
Press the code-clear button (the code-clear button is in the back of
outdoor call station, for details, please refer to the
lock
connection
section. Its icon is . ) and it creates one “Di” sound. This means
that code clearing is successful.
Note: Be careful when doing this, as it will cause a malfunction. You
will then need to carry out the coding procedure of outdoor call
station and handset again. See above for CODING and RECEIVE
CODE sections.
Setting of ring tone
Press the “ ” (ring tone sele ction button) when the handset
monitor is in standby stat us, until a ring tone sounds, the
monitor is now in r ing tone selection mode. At th is time, press
the “ ” button successively to choose anot her tone(A tot al 12
ring tones are available for selection ). After choosing your
favorite tone, press the “ ” b utton to confirm, or w ait until the
playing tone is ended, then it w ill auto -exit.
Adjusting brightness
There are 6 levels for bright ness adjustment.
Press the “ ” button when the handset monitor is in talk status or
surveillance function(For details, please kindly refer to the BASIC
OPERATION and SURVEILLANCE), then the brightness level will
become higher. At this time, it will show “Val 0i” on the handset
monitor (“ i ”is to indicate the brightness level). When the brightness
is adjusted up to maximum level, if you press this button again, then
it will be invalid.
Press the “ ” button when the handset monitor is in talk status or
surveillance status, then the brightness level will become lower. At
this time, it will show “Val 0i” on the handset monitor (“ i ” is to
indicate the brightness level). When the brightness is adjusted to
minimum level, if you press this button again, then it will be invalid.
Surveillance
One to one intercom:
1).Press the “ ” button when the handset monitor is in standby
9
status, then the screen will display “monitoring 01”.
2).If the outdoor call station receives a signal within 1S, then it will
display the 1st outdoor station; if not receiving the signal within 4S,
then it will auto-exit the monitor status.
3).In monitor status, press the “ ” button again, then it will exit the
monitoring of 1st outdoor call station. The monitor time is 60S. After
60S, it will auto-exit the monitor status.
One to two or two to two system:
1)Press the “ ” button when the handset monitor is in standby
status, then it will monitor the 1st outdoor station (It will display
monitoring 01” ); press this “ ” button again, then it will monitor
the 2nd outdoor station (It will display“monitoring 02”); press the “
” button in third time, it will auto-exit the monitoring status.
2)If receiving a signal within 1S, then it will monitor the outdoor
station; if not receiving the signal within 4S, then it will auto-exit the
monitor status.
3)In standby status, press the “ ” button to start or end the
monitoring of outdoor stations. After 60S, it will auto-exit the status.
Basic operation
one to one intercom:
1).In standby status, when a visitor presses the call button on call
station, then the power indicator will still light.
2).a.If not receiving a response signal within 4S, then it will sound
“Di Di Di Di”, and it will end the call status and return to the standby
status.
b.If receiving a response signal, the handset will display
“Talking”and the outdoor station will still sound “Du Du”, then the
power indicators of handset/s will light and play the selected ring
tone/s; meanwhile the TFT-LCD will display the visitor’s image.
3).a.If no one answers the call, the call will last 60S and return to
the standby status.
b.If some one presses the “ ” buttons, then it will stop playing
the ring tone and enter the talk status (The indicators in handset
monitors will turn from red to green and stay lit), the talk time is
10
120S.
4).In the process of talking, pressing the “ ” button will operate the
relay at the call station which can be connected to operate an electric
lock release and allow the visitors enter, the monitor will display
“unlock” (If visibility is poor, pressing the “ ” button will activate
the night-visiton of outdoor camera ).
5).In the process of talking, the user can press the “ ” button again
to end the communication, and then handset monitor will enter the
standby status after sounding two “Du Du” tones.
One to two intercom:
1)In standby status, when the visitors press the call button on call
station, then the power indicators will light.
2).a.If not receiving a response signal within 4S, then it will sound
“Di Di Di Di”, and end the call status and return to the standby
status.
b. If receiving a response signal from any handset monitors, then
the handset will display “Talking” and the outdoor call station will still
sound “Du Du”. Then the power indicators of handset will remain lit
and play the selected ring tone; meanwhile the TFT-LCD will display
the visitor’s image.
3).a.If no one answers the call, the call will last 60S and return to
the standby status.
b. If some one presses the “ ” button from any handsets, then it
will stop playing the ringtone and enter the talk status (the indicator
in handset will turn from red to green and remain lit), the talk time is
120S, while the 2nd handset will return back to standby status after
creating one “ Di ” sound.
4).In the process of talking, pressing the “ ” button will operate
the relay and allow the visitors to enter, the monitor will display
“unlock” ( pressing the “ ” button will activate the night-vision of
outdoor camera).
5).In the process of talking, the user can press the “ ” button again
to end the communication, and then it will enter the standby status
after sounding two “Du Du” tones.
11
Handset intercom (Paging):
1).In standby status, if the user presses the “ ” in one handset
monitor, then the red indicators will light and enter the call status.
The screen will display“ Talking”.
2).a.If there is no response signal with 4S from called handset
monitor, after 4 “Di Di Di Di” tones, the handset will exit the
callstatus and return to standby status.
b.If receiving a response signal with 4S from the called handset
monitor, then the calling handset monitor will play the selected ring
tone, then the called handset will display “Talking” and play its
selected ring tone and the indicator light will remain lit.
3). a.If some one answers the call from called handset monitor, the
call will last 60S and enter the standby status.
b. If some one answers the call from called handset monitor, then
it will stop playing the ring tone and enter the “Talking” status (the
indicators in both handset monitors will turn from red to green and
remain lit), the talk time is 120S.
c.Meanwhile, if pressing the “ ” button in calling handset monitor,
then it will end the call and enter into the standby status.
4).In the process of talking, the user can press the “ ” button again
in any handset monitors to end the communication, then it will enter
the standby status after hearing two “Du Du”.
Note: If the handset monitor is short of power, then it will indicate
the user to charge the battery in handset monitor.
Night-vision operation
1).When the handset is in talking status, press the “ ” button to
activate the night-vision of outdoor camera.
2).When the handset is in surveillance status, press the “ ” button
to activate the night-vision of outdoor camera.
Unlocking time setting
1).The 1st unlocking time is 1.8S (In default status, this is the 1st
unlocking method). With power disconnected from the call station,
press and hold the call button in outdoor call station, at this time
connect the power to call station, when the unit sounds a single “Di”
12
tone , release the call button and the unlocking time will now be set
at 1.8 seconds
2).The 2nd unlocking time is 4S. With power disconnected, press and
hold the call button on call station, and connect power to this call
station. When you hear two “Di Di” tones, release the call button and
the unlocking period will be set at 4 seconds.
3). The 3rd unlocking time is 8S. With power disconnected, press and
hold the call button on call station, and connect power to the call
station. When you hear three “Di Di Di” tones, release the call button
and the unlocking period will be set at 8 seconds.
Note: The users can only unlock for the visitors during the talking
and communication mode.
In communication status, if either part is powered-off, then the other
will return back to standby status after one “Di” sound.
Installation
Panel
Screws
Back
box
Step 1: Install the back box
Step 2: Install panel
1).Release the call station from back box by removing the locking
screw under the front edge of the unit
2).Drill proper wire-through holes according to the mounting units.
3).Use four screws to fix the installation panel on the wall.
4).Connect the cables from wire-through holes and square holes of
rear panel in the call station.
(When an electric lock is not being connected , any unused cables or
terminals should be protected and insulated to avoid the possibility of
short circuits)
5).Use screws to fix the door station on the rear installation panel.
13
Lock connection
1).Power -on unlocking diagram
DC5V Unlock in put
Unlock relay out pu t
+ - KB NC C NO
1 2 3 4 5 6
AC90~264V
50/60HZ
Unlock
adaptor
DC12V/3A
+
-
Input:
AC90~264V
Output：
DC5V/1A
Power
adaptor
Lock in terface
Power on unlock
Electronic lock
EX IT
2).Power -off unlocking di agram
DC5V
Exit input Un lock relay output
AC90~264V 50/60hz
+ - KB NC C NO
1 2 3 4 5 6
Power
adapt or
DC12V /3A
+
-
Input
AC90~26 4V
Output
DC5V/1A
power
adaptor
Lock in terface
Power of f
unlock
Magneti c
lock
EX IT
14
Technical specifications
Door Station
Image Sensor
1/4" CMOS
Min. Illumination
0 Lu (IR on)
Power
DC5V/1A
Current
20mA~30mA (standby), 300mA (operation)
Audio Input
12-digits digital audio signal, DAC interface,
8Kbps sampling speed rate
Image Compression
MJPEG compression
Transmission Power
16~20dBm
Ringing tone
12 options selectable
Dimension
127mm(H) 95mm(W) 37mm(D)
Weight
150g
Monitor
Screen
2.4" TFT LCD
Effective Pixels
320 240
Power Source
DC4.5V/0.8A (rechargeable battery
operated)
Battery Charging Time
For the first time, it is 7~10 hours;
Later around 4 hours
USB port
For battery charge
Current
20mA~30mA/3.7V (standby),
250mA (Operation)
Receiving Sensitivity
-90dBm
Dimensions
118mm(H) 77mm(W) 19mm(D)
Weight
150g
15
Trouble shooting
Malfunction
Checking
Debug
Will not
power on
Check by pressing the
ON/OFF button
Press the ON/OFF button
fully
Check whether the power of
lion battery is enough or not
Charge the battery
Check the connection of
power adaptor
Connect to the power
adaptor
Battery not
charging
Check whether the socket in
power adaptor is plugged into
the
Mini-USB
charging interface
Re-connect the socket
and Mini-USB charging
interface
Check whether the power
adaptor is plugged into the
AC110~240V correctly
Plug the power adaptor
into AC110~240V socket
Cannot page
or talk
between two
handsets
Check the coding between two
handsets or two call stations
Clear the existing codes
and re-code between
two handsets or two call
stations
Images is
flashing
Check whether the handset/s or
callstations are located close
interfering equipment such as
TV sets or microwave ovens
wireless router,etc
Keep handsets far away
from the interfering
equipments
No signal in
the handset
monitors
Check the connection with
the power supply
Connect the power
supply
Check the distance between
handset monitor and outdoor
camera
Adjust the outdoor
camera and handset
monitor into proper
distance
Check whether there is nearby
interfering electrical equipment
such as microwave oven or
wireless routers, etc
Keep away from
strong magnetic,radio
or electrical fields
16
Propagation of radio waves
The radio coverage quality, and therefore the performance of the
doorphone, may be altered by obstacles located between the door
station and the interior handset unit:
walls, partitions, slabs, armoured doors or lift shaft comprising
metallic components.
(Furthermore, radio coverage may also be affected by electrical or
electromagnetic interference).
It is important to test the radio range on the installation site.
Plasterboard
and wood
Concrete and
building blocks
10% to 30%
reduction
50% to 70%
reduction
Brick
30% to 50%
reduction
Metal and metal
cladding
(e.g. armoured door)
70% to 90%
reduction
Battery specifications:
Battery
Typ e
Standby time
Cha rging
limited voltag e
3.7V,1050 mAh
Li-ion battery
72hour
4.2V
The above marked time is in the specific situation and
atmosphere
Use the authorized charger only
Do not dis assemble the batteries
Do not short -circuit the batterie s
Do not expose the batt eries to extreme hear, f ire or water
17
Notes
1).Handset monitors should be situated away from heat sources and
water.
2).Products should be opened only by the professional personnel. If
there is a malfunction please contact us or our agents.
3).Handset monitors should be located where there is a good
ventilation, dry, dustless and not in direct sunlight. Don′t use the
chemical impregnated or wet cloth to clean the products. Clean, soft,
dry cloth can be used to clean the products.
4).Please install the products according to this instruction manual to
avoid of damaging to the products.
Loading...