XROCKER PALADIN User Manual

User Manual Item no: 0777201

Need Help? Email: Service@XRockerNaon.co.uk

Phone: [phone] www.XRockerNaon.co.uk

IMPORTANT: You must keep your original retail receipt as proof of purchase.

Paladin

2

Thank you for purchasing this X Rocker gaming

chair. You are now close to enhancing your
favourite games with glorious audio!

To get started, please assemble the chair using

the assembly instrucons on the separate leaet
and then follow the instrucons in this manual to

get rocking!

Table of contents

3 Box contents and control panel overview

4 Wired Connecon guide: TV

(Xbox One and PS4 audio)

5 Connect by controller (PS4 systems only)
6 Bluetooth connecon guide

(Mobile phones/tablet devices)

7 Troubleshoong ps
8 Health and safety informaon
9 Power supply safety informaon

Welcome to X Rocker!

3

Control panel overview

B1 - USB Power supply adapter

B2 - 2m 3.5mm to 3.5mm audio cable

B3 - 15cm RCA to 3.5mm(F) audio cable

B4 - RCA female to female adapters

B5 - USB Power cable

+

+

+

+

+

B

B1

B3

B5

B4

B2

4

1. Connect B2 cable to X Rocker control panel 3.5mm INPUT socket.

2. Connect other end of B2 cable to the TV headphone socket.

3. Once connected to your TV, increase volume to 50% of the maximum
for the best sound level.**

*N.B: If your TV does not feature a headphone socket then you may need
to purchase an addional TOSlink adapter to get connected directly to a
console for audio.
**Depending on your TV you may need to Increase the headphone
volume separately in the TV sound sengs.

Wired connecon guide: TV

(Xbox One and PS4 audio)

B2

TV

5

Connect by controller:
(PS4 systems only)

1. Connect the B2 cable to the boom of the PS4 controller via the

headset socket.

2. Connect the other end of the B2 cable to the chair via the green port.

3. With the PS4 turned on and in the main menu, press and hold the

black PS buon unl the quick menu appears.

4. In this menu select [Adjust sound and devices]

5. Then select [output to headphones]

6. Change the seng from [Chat Only] to [All audio]

7. Make sure the volume in the previous menu is set to the maximum.

B2

6

Setup:

On the Audio output device
go into its Bluetooth sengs,

turn Bluetooth on if it is not
on already and search for

XROCKER. Upon nding this,

select the XROCKER opon.
If a passcode is required the four
digit code will be ‘0000’.

Bluetooth connecon guide:

(Mobile phones/tablet devices)

7

• Make sure that the power cable is
connected correctly.

• Make sure that the power supply at the
power source is working correctly.

• With the chair turned to the ON posion,
give the power cable a slight wiggle in the
port. If any lights icker (or not)
then please contact support (details below).

• Review the connecon methods on
the previous page and try alternave
connecon methods if possible.

• Conrm that the device/system is
correctly congured as per previous
connecon guide.

• Please make sure that the volume of
the source device is at a higher level to

strengthen the audio signal.

• Please contact X Rocker support

(service@XRockerNaon.co.uk) regarding
this issue.

• In this case, try another of the three

wireless bands to isolate the signal.

Troubleshoong ps

No power going to control panel

Issue Troubleshoong steps

No sound

Bluetooth mode cuts out during

gameplay/No vibraon or subwoofer
sound via analogue connecon

The cables connected to my
X Rocker have been broken
accidentally

Interference over wireless connecon

8

Health and safety informaon

• Avoid immersing or allowing the X Rocker to come into contact

with liquids.

• Please consult X Rocker Support before unscrewing any of the electrical

components on the chair.

• Please be mindful of any cabling laid out between the X Rocker and

power source/audio device.

• Please be mindful of cabling aached when moving/swivelling

the X Rocker.

• If the cables or electrical equipment are broken then this may present

a choking risk, please contact Support for replacements and dispose of

these parts safely.

• Do not stand on the X Rocker or exceed the 120kg weight limit via

other means.

• Do not lean back on the chair to the point in which the pedestal would

li o the ground.

• X Rocker armrests are designed for support and comfort during

gameplay, please do not use these as support for geng in/out of
the chair.

• Playing audio for long periods at loud volumes may contribute to

dicules in hearing.

• Please be considerate to others when playing audio through the

X Rocker speakers at higher volumes.

9

Power Supply unit trademark: BI;
Model name: BI12T-050100-I;

Input: 100-240V~, 50/60 Hz, 0,5A;
Output: 5 VDC, 1 A;

ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping

or splashing and that no objects filled with liquids, such as vases,

shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device,

the disconnect device shall remain readily operable;
C.Only use the attachments/accessories specified by manufacturer.

Need Help? Email: Service@XRockerNaon.co.uk

Phone: [phone]

www.XRockerNaon.co.uk

IMPORTANT: You must keep your original retail

receipt as proof of purchase.