X Rocker 6109 User Manual

06109

Need Help? Email: [e-mail] Web: www.thexrocker.com Phone: [phone]

Need Help? Email: [e-mail] Web: www.thexrocker.com Phone: [phone]

FEATURES

A-Control Panel

A1-Power On/Off
A2-Vibration Mode
A3-Vibration & Music SYNC Mode
A4-Volume Adjustment
A5-Bass Volume Adjustment
A6-Mute Mode
A7-Wireless Mode
A8-12V DC Power Input Jack
A9-Audio Input Jack
A10-

DC 3V/200mA Power Input Jack of Transmitter

A11-Audio Input Jack of Transmitter
A12-

Power On/Off Switch of Transmitter

A13-

Wireless Band Switch of Transmitter

A9

A12

A11

A10

A13

AUDIO IN

OFF/ON

BAND

123

…… ……

DC IN

DC 3V

B1-3m RCA Stereo Male to RCA Stereo Male Plug Cable(1 PC)
B2-INPUT:120V AC 60Hz
OUTPUT:12V DC 1.6A Main POWER Adapter.
B3-RCA Female-to-Female Plug Adapter(2 PCS)
B4-1m 3.5mm Stereo Male to Male Cable
B5-0.15m RCA stereo Male to 3.5mm Stereo Male Cable(1PC)
B6-Transmitter Box

B-Accessories Supplied

The Unit Specification

Signal-to-Noise Rate(Amplifier): Subwoofer :＞50dB
Satellite :＞60dB
Frequency Response: 60Hz~15kHz
Distortion: Subwoofer: ＜4%(F=90Hz)
Satellite: ＜1%(F=1kHz)
Input: DC 12V/1.6A

TX/RX Specification

1) TX Power Supply 3V DC / 200mA
3 X AAA Batteries(BATTERIES ARE NOT INCLUDED)

2) TX Current: ≤40mA

3) RX Current: ≤50mA

4) TX Transmission distance:<65ft/20 meters (No buildings or other barriers)

5) Environmental temperature: 14℉~158℉/-10℃~70℃

6) Modulation mode: FSK

7) TX Work frequency: 914,914.5, 915MHz

8) RX Work frequency: 914,914.5, 915MHz

9) TX Power:<10dBM

10) RX Sensitivity:-95dBM

11) RX frequency range: 50Hz~12KHz

12) Second Harmonic Suppression: -40dB

13) Band Quantity: 3 channels

C-Audio Specification

9.84ft/3m

0.492ft/0.15m

Some parts may vary slightly

B5

B6

Need Help? Email: [e-mail] Web: www.thexrocker.com Phone: [phone]

SET UP

FUNCTIONS:

• Side control panel with volume, bass control, input jack and channel choice

• Back control panel with input and power jacks.

• Hardwood frame construction with dual layer foam cover for extra comfort

• Easy to clean heavy duty upholstery grade vinyl cover.

• Wireless audio transmission

READ BEFORE USAGE:

· Always make sure the backrest is locked before sitting in the chair

· Excessive use of audio equipment could lead to hearing loss

· Children under the age of 13 should not use this product without adult supervision.

· Strictly for indoor use-do not expose to direct sunlight, moisture or extreme temperatures

· If cover becomes wet, disconnect power immediately and don't use until completely dry.

· Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts you at risk
for injury or death from electrical shock.

· When using in wireless mode connect the audio cable to the RX. Do NOT connect the audio input directly to the Recliner or the
device will be DAMAGED.

· Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

· Do not mix old and new batteries.

1. Lift X Rocker out of box

2. Position the chair on the floor.

3. Follow the diagrams below to assemble the chair

4. Review the set up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.

5. Locate the input panel on the back bottom corner of the chair. When used in wired mode, make sure that the control panel is
not more than 9.84ft/3 meters away from the audio source and 6.56ft/ 2 meters away from power source.

6. Unpack the power adapter(DC 12V 1.6A) and connect it into the power outlet, then to the power jack on the back panel. (A8)

7. Press the power button (A12) and confirm that the power indicator light (A1) is on. In wireless mode, turn on the power (A12)
to the TX box, confirm that its indicator light is on, turn the switch to adjust the channel.

8. Follow the diagrams to connect the X Rocker to the audio source of your choice in wired or wireless mode.

9. Adjust the bass and volume to your preference.

1

A

1

E

1

F

7

G

6

H

1

I

1

B

1

C

1

D

Step 1:

Lift the backrest(B) up, the lower
the backrest into the seat
brackets. Securely lock the flat
head bolts into both sides of the
seat(A).

Step 2:

Connect the cable between the
seat(A) and backrest(B). Make
sure the terminal is fully
inserted. Then attach the Velcro
flap.

Step 3:

Open the Velcro flap of left
armrest(C). Attach the left
armrest to the seat using the
parts shown in the illustration.
Tighten the bolts with Allen
wrench(I) provided.

Step 4:

Connect the cable between the
seat(A) and right armrest(D).
Make sure the terminal is fully
inserted.

Step 5:

Open the Velcro flap of right
armrest(C). Attach the right
armrest to the seat using the
parts shown in the illustration.
Tighten the bolts with Allen
wrench(I) provided.

Step 6:

Attach the handle, please pay
careful attention to the drawing
to be sure you position it
correctly. Insert the bolt and
tighten it with the Allen wrench
provided. Push the plastic cap (F)
into the bolt hole to finish the
assembly.

Need Help? Email: [e-mail] Web: www.thexrocker.com Phone: [phone]

white

red

Wii

white

red

white

red

Wii

Need Help? Email: [e-mail] Web: www.thexrocker.com Phone: [phone]

Need Help? Email: [e-mail] Web: www.thexrocker.com Phone: [phone]

This warranty covers all defects in material and workmanship in this product, but DOES NOT COVER the following:

1. Damage, deterioration or malfunction resulting from:
a. Acts of God, accident, misuse, abuse, negligence, improper installation, maintenance or operation, or
failure to follow the instructions contained in this Owners Manual.
b. Any damage in the shipment of the products. (Claims must be presented to the carrier)
c. Repair, attempted repair, or modifications by anyone other than the Ace Bayou Service Center.

2. Any unit which has been modified of attempted to be modified or altered in anyway whatsoever.

3. Normal wear and periodic maintenance.

4. Any unit used for industrial or commercial purposes (including rental).

5. Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses, batteries, etc).

6. Customer instruction installation, set up adjustments or signal reception problems

WARRANTY PAGE

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ACE BAYOU
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE LENGTH OF THIS WARRANTY.

Ace Bayou will repair or replace (at its discretion) units covered by this warranty, without charge to the consumer for labor
or materials. YOU ARE RESPONSIBLE FOR INITIAL SHIPPING CHARGES. However, we will pay the return shipping charges to
any destination within USA if repairs are covered by the warranty.

Limited Warranty:

Ace Bayou warrants this product (including any accessories) against defects in material and workmanship for a period of
90 days from the date of first consumer purchase. This warranty is enforceable only by the original purchaser.
ALL DAMAGED OR MISSING PARTS MUST BE REPORTED WITHIN 14 DAYS OF PURCHASE.

IMPORTANT: You must keep your original retail receipt as proof of purchase.