2.1 Wireless
& Bluetooth
with vibration
Need Help?
Email: support@xrockergaming.com
www.xrockergaming.com
IMPORTANT: You must keep your original retail receipt as proof of purchase.
Contents
English
French
Spanish
3
14
25
2
ENGLISH
Welcome to X Rocker!
Thank you for purchasing this X Rocker
gaming chair. You are now close to
enhancing your favourite games with
glorious audio!
To get started, please assemble the chair
using the assembly instructions on the
separate leaflet and then follow the
instructions in this manual to
get rocking!
Table of contents
4
5 Wireless connection guide: PS4
6 Wireless connection guide: Xbox One
7 Wireless connection guide: TV (All systems)
Box contents and control panel overview
8 Wired connection guide: TV (All consoles)
9
10 Bluetooth connection guide
11 Troubleshooting tips
12 Health and safety information
13 Power supply safety information
Wired connection guide: PS4 Controller only
3
B
9.84ft/3
+
B1
+
B3
+ +
B5 B6
+
+
0.492ft/0.15
B2
B4
3.28ft/1
B1 - 3m 3.5mm to 3.5mm Audio cable
B2 - 15cm RCA to female 3.5mm audio cable
B3 - RCA female to female adapters
B4 - Power supply Cable
B5 - Wireless DAC Transmitter
B6 - 1m Optical Toslink Audio Cable
B7 - Micro USB Cable
2.624ft/1
+
B7
Control panel overview
4
Wireless connection guide: PS4
Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro
USB cable
into the X Rocker DAC converter and the other end into one of the front USB
ports on the PS4™ system. Remove the clear plastic covers from both ends of
the optical cable. Input one end of the optical cable into the X Rocker
Wireless DAC (Slot titled SPDIF) and the other into the Optical SPDIF
connector on the PS4™ system.
OPTICAL
Back
SPDIF
Step 2: Turn the PS4™ system back on. Select one of the
wireless bands (1,2,3) on the wireless DAC and then switch
to the corresponding band on the chair.
Step 3: On the main PS4™ menu screen Select (Settings)
> [Sound and Screen] > [Audio Output Settings] >
[Primary Output Port] Change this to [Digitial Optical] >
choose AAC.
Save, exit and enjoy!
5
Wireless connection guide: Xbox One
Step 1: Make sure that the Xbox One™ system is switched OFF. Insert
the micro USB cable into the X Rocker DAC converter and the other
end into one of the back USB ports on the Xbox One™ system.
Remove the clear plastic covers from both ends of the optical cable.
Input one end of the optical cable into the X Rocker Wireless DAC
Slot (labelled SPDIF) and another into the Optical SPDIF connector
on the Xbox One™ system.
SPDIF
Back
Step 2: Turn the Xbox One™ system back on. Select one of the wireless
bands (1,2,3) on the wireless DAC and then switch to the corresponding
band on the chair.
Step 3: On the Xbox One™ menu screen, Select (Settings) > [All Settings]
> [Display and Sound] > [Audio Output] > under [Digital Audio],
select [Optical Audio] and set it to [Stero Uncompressed]
Save, exit and enjoy!
6
Wireless connection guide: TV
(All systems)
Transmitter
TV/SPDIF/Optical Socket
B6
B7
1.Connect B6 Optical Cable to the B3 Wirelesss DAC transmitter’s SPDIF
Port.
2.Connect other end of
3.Connect Micro USB Cable to the transmitter and other end to an
available USB socket on the TV.
4.Once connected to your TV, increase volume to 50% of the
maxiumum for the best sound level.
B6 Optical Cable to the TV Optical socket.
**
TV USB socket
* N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket then you
can instead use the 3.5mm audio connection to connect to a headphone
socket.
** Depending on your TV you may need to enable the Optical output
seperately.
7
Wired connection guide: TV
(All consoles)
TV/Mobile/Tablet
B1
1.Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2.Connect other end of
B1 3.5mm end into the headphone socket of
your television.
3.Once connected to your TV, increase volume to 50% of the
maximum for the best sound level.
** Depending on your TV you may need to increase the headphone
volume separately in the TV sound settings.
**
8
Wired connection guide: PS4
Controller only
B1
1.Connect the B1 cable to the bottom of the PS4 controller via the
headset socket.
2.Connect the other end of the
port.
3.With the PS4 turned on, go to the main menu (or locate the main
menu screen). Press and hold the PS button on the PS4 controller
until the quick menu appears on screen.
4.In this menu select
5.Then select
6.Change the setting from
7.Make sure the volume in the previous menu is set to the maximum.
8.Set the control panel Wireless switch to the ‘
[output to headphones]
[Adjust sound and devices]
[Chat Only] to [All audio]
B1 cable to the chair via the green
OFF’ position.
9
Bluetooth connection guide
Step 1:
Switch the X Rocker’s wireless switch to the
Bluetooth position.
Step 2:
On the Audio output device
go into its Bluetooth settings,
turn Bluetooth on if it is not on
already and search for
XROCKER. Upon finding this,
select the
If a passcode is required the
four digit code will be
XROCKER option.
‘0000’.
10
Troubleshooting tips
IssueTroubleshooting steps
No power going to control panel
No sound
• Make sure that the power cable is
connected correctly.
• Make sure that the power supply at the
power source is working correctly.
• With the chair turned to the ON
position, give the power cable a slight
wiggle in the port. If any lights flicker (or
not)
then please contact support (details
below).
• Review the connection methods on
the previous page and try alternative
connection methods if possible.
• Confirm that the device/system is
correctly configured as per previous
connection guide.
• Make sure that the wireless channel
switcher is in the corresponding
position that suits your connection
method.
(1,2,3 for wireless and AUX for wired
connections).
Wireless transmitter cuts out
during gameplay/No vibration or
subwoofer sound via analogue
connection
The cables connected to
my X Rocker have been
broken accidentally
terference over wireless connection
In
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
• Please contact X Rocker support
(support@xrockergaming.com)
regarding this issue.
• In this case, try another of the three
wireless bands to isolate the signal.
11
Health and safety information
• Avoid immersing or allowing the X Rocker to come into contact
with liquids.
• Please consult X Rocker Support before unscrewing any of the
electrical components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and
power source/audio device.
• Please be mindful of cabling attached when moving/swivelling
the X Rocker.
• If the cables or electrical equipment are broken then this may
present a choking risk, please contact Support for replacements and
dispose of these parts safely.
• Do not stand on the X Rocker or exceed the 250lbs weight limit via
other means.
• Do not lean back on the chair to the point in which the pedestal
would lift off the ground.
• X Rocker armrests are designed for support and comfort during
gameplay, please do not use these as support for getting in/out of
the chair.
• Playing audio for long periods at loud volumes may contribute to
difficulties in hearing.
• Please be considerate to others when playing audio through the
X Rocker speakers at higher volumes.
12
Power supply safety information
ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to
dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect
device, the disconnect device shall remain readily operable;
C. Only use the attachments/accessories specified by manufacturer.
Power Supply unit trademark: BIron;
Model name: Bl24-1 20200-AdU;
Input: 1 00-240 VAC,50/60Hz,0.8A;
Output:DC 1 2V-2A
13
Loading...